[PATCH v11 06/18] sifive: fu540: add ddr driver
Pragnesh Patel
pragnesh.patel at sifive.com
Tue May 19 09:03:31 CEST 2020
Add driver for fu540 to support ddr initialization in SPL.
This driver is based on FSBL
(https://github.com/sifive/freedom-u540-c000-bootloader.git)
Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
---
board/sifive/fu540/Kconfig | 2 +
drivers/ram/Kconfig | 1 +
drivers/ram/Makefile | 2 +
drivers/ram/sifive/Kconfig | 13 ++
drivers/ram/sifive/Makefile | 6 +
drivers/ram/sifive/fu540_ddr.c | 409 +++++++++++++++++++++++++++++++++
6 files changed, 433 insertions(+)
create mode 100644 drivers/ram/sifive/Kconfig
create mode 100644 drivers/ram/sifive/Makefile
create mode 100644 drivers/ram/sifive/fu540_ddr.c
diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig
index 4330ac4491..d41c305227 100644
--- a/board/sifive/fu540/Kconfig
+++ b/board/sifive/fu540/Kconfig
@@ -19,6 +19,8 @@ config SYS_TEXT_BASE
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select GENERIC_RISCV
+ select RAM
+ select SPL_RAM if SPL
imply CMD_DHCP
imply CMD_EXT2
imply CMD_EXT4
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index 56fea7c94c..7e6e981897 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -74,4 +74,5 @@ config IMXRT_SDRAM
This driver is for the sdram memory interface with the SEMC.
source "drivers/ram/rockchip/Kconfig"
+source "drivers/ram/sifive/Kconfig"
source "drivers/ram/stm32mp1/Kconfig"
diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile
index 5c897410c6..769c9d6218 100644
--- a/drivers/ram/Makefile
+++ b/drivers/ram/Makefile
@@ -17,3 +17,5 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_K3_J721E_DDRSS) += k3-j721e/
obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o
+
+obj-$(CONFIG_RAM_SIFIVE) += sifive/
diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig
new file mode 100644
index 0000000000..6aca22ab2a
--- /dev/null
+++ b/drivers/ram/sifive/Kconfig
@@ -0,0 +1,13 @@
+config RAM_SIFIVE
+ bool "Ram drivers support for SiFive SoCs"
+ depends on RAM && RISCV
+ default y
+ help
+ This enables support for ram drivers of SiFive SoCs.
+
+config SIFIVE_FU540_DDR
+ bool "SiFive FU540 DDR driver"
+ depends on RAM_SIFIVE
+ default y if TARGET_SIFIVE_FU540
+ help
+ This enables DDR support for the platforms based on SiFive FU540 SoC.
diff --git a/drivers/ram/sifive/Makefile b/drivers/ram/sifive/Makefile
new file mode 100644
index 0000000000..d66efec264
--- /dev/null
+++ b/drivers/ram/sifive/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2020 SiFive, Inc
+#
+
+obj-$(CONFIG_SIFIVE_FU540_DDR) += fu540_ddr.o
diff --git a/drivers/ram/sifive/fu540_ddr.c b/drivers/ram/sifive/fu540_ddr.c
new file mode 100644
index 0000000000..c9db8a4494
--- /dev/null
+++ b/drivers/ram/sifive/fu540_ddr.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * (C) Copyright 2020 SiFive, Inc.
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel at sifive.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <init.h>
+#include <ram.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <clk.h>
+#include <wait_bit.h>
+
+#define DENALI_CTL_0 0
+#define DENALI_CTL_21 21
+#define DENALI_CTL_120 120
+#define DENALI_CTL_132 132
+#define DENALI_CTL_136 136
+#define DENALI_CTL_170 170
+#define DENALI_CTL_181 181
+#define DENALI_CTL_182 182
+#define DENALI_CTL_184 184
+#define DENALI_CTL_208 208
+#define DENALI_CTL_209 209
+#define DENALI_CTL_210 210
+#define DENALI_CTL_212 212
+#define DENALI_CTL_214 214
+#define DENALI_CTL_216 216
+#define DENALI_CTL_224 224
+#define DENALI_CTL_225 225
+#define DENALI_CTL_260 260
+
+#define DENALI_PHY_1152 1152
+#define DENALI_PHY_1214 1214
+
+#define PAYLOAD_DEST 0x80000000
+#define DDR_MEM_SIZE (8UL * 1024UL * 1024UL * 1024UL)
+
+#define DRAM_CLASS_OFFSET 8
+#define DRAM_CLASS_DDR4 0xA
+#define OPTIMAL_RMODW_EN_OFFSET 0
+#define DISABLE_RD_INTERLEAVE_OFFSET 16
+#define OUT_OF_RANGE_OFFSET 1
+#define MULTIPLE_OUT_OF_RANGE_OFFSET 2
+#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7
+#define MC_INIT_COMPLETE_OFFSET 8
+#define LEVELING_OPERATION_COMPLETED_OFFSET 22
+#define DFI_PHY_WRLELV_MODE_OFFSET 24
+#define DFI_PHY_RDLVL_MODE_OFFSET 24
+#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0
+#define VREF_EN_OFFSET 24
+#define PORT_ADDR_PROTECTION_EN_OFFSET 0
+#define AXI0_ADDRESS_RANGE_ENABLE 8
+#define AXI0_RANGE_PROT_BITS_0_OFFSET 24
+#define RDLVL_EN_OFFSET 16
+#define RDLVL_GATE_EN_OFFSET 24
+#define WRLVL_EN_OFFSET 0
+
+#define PHY_RX_CAL_DQ0_0_OFFSET 0
+#define PHY_RX_CAL_DQ1_0_OFFSET 16
+
+struct fu540_ddrctl {
+ volatile u32 denali_ctl[265];
+};
+
+struct fu540_ddrphy {
+ volatile u32 denali_phy[1215];
+};
+
+/**
+ * struct fu540_ddr_info
+ *
+ * @dev : pointer for the device
+ * @info : UCLASS RAM information
+ * @ctl : DDR controller base address
+ * @phy : DDR PHY base address
+ * @ctrl : DDR control base address
+ * @physical_filter_ctrl : DDR physical filter control base address
+ */
+struct fu540_ddr_info {
+ struct udevice *dev;
+ struct ram_info info;
+ struct fu540_ddrctl *ctl;
+ struct fu540_ddrphy *phy;
+ struct clk ddr_clk;
+ u32 *physical_filter_ctrl;
+};
+
+#if defined(CONFIG_SPL_BUILD)
+struct fu540_ddr_params {
+ struct fu540_ddrctl pctl_regs;
+ struct fu540_ddrphy phy_regs;
+};
+
+struct sifive_dmc_plat {
+ struct fu540_ddr_params ddr_params;
+};
+
+/*
+ * TODO : It can be possible to use common sdram_copy_to_reg() API
+ * n: Unit bytes
+ */
+static void sdram_copy_to_reg(volatile u32 *dest,
+ volatile u32 *src, u32 n)
+{
+ int i;
+
+ for (i = 0; i < n / sizeof(u32); i++) {
+ writel(*src, dest);
+ src++;
+ dest++;
+ }
+}
+
+static void fu540_ddr_setup_range_protection(volatile u32 *ctl, u64 end_addr)
+{
+ u32 end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1;
+
+ writel(0x0, DENALI_CTL_209 + ctl);
+ writel(end_addr_16kblocks, DENALI_CTL_210 + ctl);
+ writel(0x0, DENALI_CTL_212 + ctl);
+ writel(0x0, DENALI_CTL_214 + ctl);
+ writel(0x0, DENALI_CTL_216 + ctl);
+ setbits_le32(DENALI_CTL_224 + ctl,
+ 0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET);
+ writel(0xFFFFFFFF, DENALI_CTL_225 + ctl);
+ setbits_le32(DENALI_CTL_208 + ctl, 0x1 << AXI0_ADDRESS_RANGE_ENABLE);
+ setbits_le32(DENALI_CTL_208 + ctl,
+ 0x1 << PORT_ADDR_PROTECTION_EN_OFFSET);
+}
+
+static void fu540_ddr_start(volatile u32 *ctl, u32 *physical_filter_ctrl,
+ u64 ddr_end)
+{
+ volatile u64 *filterreg = (volatile u64 *)physical_filter_ctrl;
+
+ setbits_le32(DENALI_CTL_0 + ctl, 0x1);
+
+ wait_for_bit_le32((void *)ctl + DENALI_CTL_132,
+ BIT(MC_INIT_COMPLETE_OFFSET), false, 100, false);
+
+ /* Disable the BusBlocker in front of the controller AXI slave ports */
+ filterreg[0] = 0x0f00000000000000UL | (ddr_end >> 2);
+}
+
+static void fu540_ddr_check_errata(u32 regbase, u32 updownreg)
+{
+ u64 fails = 0;
+ u32 dq = 0;
+ u32 down, up;
+ u8 failc0, failc1;
+ u32 phy_rx_cal_dqn_0_offset;
+
+ for (u32 bit = 0; bit < 2; bit++) {
+ if (bit == 0) {
+ phy_rx_cal_dqn_0_offset =
+ PHY_RX_CAL_DQ0_0_OFFSET;
+ } else {
+ phy_rx_cal_dqn_0_offset =
+ PHY_RX_CAL_DQ1_0_OFFSET;
+ }
+
+ down = (updownreg >>
+ phy_rx_cal_dqn_0_offset) & 0x3F;
+ up = (updownreg >>
+ (phy_rx_cal_dqn_0_offset + 6)) &
+ 0x3F;
+
+ failc0 = ((down == 0) && (up == 0x3F));
+ failc1 = ((up == 0) && (down == 0x3F));
+
+ /* print error message on failure */
+ if (failc0 || failc1) {
+ if (fails == 0)
+ printf("DDR error in fixing up\n");
+
+ fails |= (1 << dq);
+
+ char slicelsc = '0';
+ char slicemsc = '0';
+
+ slicelsc += (dq % 10);
+ slicemsc += (dq / 10);
+ printf("S ");
+ printf("%c", slicemsc);
+ printf("%c", slicelsc);
+
+ if (failc0)
+ printf("U");
+ else
+ printf("D");
+
+ printf("\n");
+ }
+ dq++;
+ }
+}
+
+static u64 fu540_ddr_phy_fixup(volatile u32 *ddrphyreg)
+{
+ u32 slicebase = 0;
+
+ /* check errata condition */
+ for (u32 slice = 0; slice < 8; slice++) {
+ u32 regbase = slicebase + 34;
+
+ for (u32 reg = 0; reg < 4; reg++) {
+ u32 updownreg = readl(regbase + reg + ddrphyreg);
+
+ fu540_ddr_check_errata(regbase, updownreg);
+ }
+ slicebase += 128;
+ }
+
+ return(0);
+}
+
+static u32 fu540_ddr_get_dram_class(volatile u32 *ctl)
+{
+ u32 reg = readl(DENALI_CTL_0 + ctl);
+
+ return ((reg >> DRAM_CLASS_OFFSET) & 0xF);
+}
+
+static int fu540_ddr_setup(struct udevice *dev)
+{
+ struct fu540_ddr_info *priv = dev_get_priv(dev);
+ struct sifive_dmc_plat *plat = dev_get_platdata(dev);
+ struct fu540_ddr_params *params = &plat->ddr_params;
+ volatile u32 *denali_ctl = priv->ctl->denali_ctl;
+ volatile u32 *denali_phy = priv->phy->denali_phy;
+ const u64 ddr_size = DDR_MEM_SIZE;
+ const u64 ddr_end = PAYLOAD_DEST + ddr_size;
+ int ret, i;
+ u32 physet;
+
+ ret = dev_read_u32_array(dev, "sifive,ddr-params",
+ (u32 *)&plat->ddr_params,
+ sizeof(plat->ddr_params) / sizeof(u32));
+ if (ret) {
+ printf("%s: Cannot read sifive,ddr-params %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ sdram_copy_to_reg(priv->ctl->denali_ctl,
+ params->pctl_regs.denali_ctl,
+ sizeof(struct fu540_ddrctl));
+
+ /* phy reset */
+ for (i = DENALI_PHY_1152; i <= DENALI_PHY_1214; i++) {
+ physet = params->phy_regs.denali_phy[i];
+ priv->phy->denali_phy[i] = physet;
+ }
+
+ for (i = 0; i < DENALI_PHY_1152; i++) {
+ physet = params->phy_regs.denali_phy[i];
+ priv->phy->denali_phy[i] = physet;
+ }
+
+ /* Disable read interleave DENALI_CTL_120 */
+ setbits_le32(DENALI_CTL_120 + denali_ctl,
+ 1 << DISABLE_RD_INTERLEAVE_OFFSET);
+
+ /* Disable optimal read/modify/write logic DENALI_CTL_21 */
+ clrbits_le32(DENALI_CTL_21 + denali_ctl, 1 << OPTIMAL_RMODW_EN_OFFSET);
+
+ /* Enable write Leveling DENALI_CTL_170 */
+ setbits_le32(DENALI_CTL_170 + denali_ctl, (1 << WRLVL_EN_OFFSET)
+ | (1 << DFI_PHY_WRLELV_MODE_OFFSET));
+
+ /* Enable read leveling DENALI_CTL_181 and DENALI_CTL_260 */
+ setbits_le32(DENALI_CTL_181 + denali_ctl,
+ 1 << DFI_PHY_RDLVL_MODE_OFFSET);
+ setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_EN_OFFSET);
+
+ /* Enable read leveling gate DENALI_CTL_260 and DENALI_CTL_182 */
+ setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_GATE_EN_OFFSET);
+ setbits_le32(DENALI_CTL_182 + denali_ctl,
+ 1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET);
+
+ if (fu540_ddr_get_dram_class(denali_ctl) == DRAM_CLASS_DDR4) {
+ /* Enable vref training DENALI_CTL_184 */
+ setbits_le32(DENALI_CTL_184 + denali_ctl, 1 << VREF_EN_OFFSET);
+ }
+
+ /* Mask off leveling completion interrupt DENALI_CTL_136 */
+ setbits_le32(DENALI_CTL_136 + denali_ctl,
+ 1 << LEVELING_OPERATION_COMPLETED_OFFSET);
+
+ /* Mask off MC init complete interrupt DENALI_CTL_136 */
+ setbits_le32(DENALI_CTL_136 + denali_ctl, 1 << MC_INIT_COMPLETE_OFFSET);
+
+ /* Mask off out of range interrupts DENALI_CTL_136 */
+ setbits_le32(DENALI_CTL_136 + denali_ctl, (1 << OUT_OF_RANGE_OFFSET)
+ | (1 << MULTIPLE_OUT_OF_RANGE_OFFSET));
+
+ /* set up range protection */
+ fu540_ddr_setup_range_protection(denali_ctl, DDR_MEM_SIZE);
+
+ /* Mask off port command error interrupt DENALI_CTL_136 */
+ setbits_le32(DENALI_CTL_136 + denali_ctl,
+ 1 << PORT_COMMAND_CHANNEL_ERROR_OFFSET);
+
+ fu540_ddr_start(denali_ctl, priv->physical_filter_ctrl, ddr_end);
+
+ fu540_ddr_phy_fixup(denali_phy);
+
+ /* check size */
+ priv->info.size = get_ram_size((long *)priv->info.base,
+ DDR_MEM_SIZE);
+
+ debug("%s : %lx\n", __func__, priv->info.size);
+
+ /* check memory access for all memory */
+ if (priv->info.size != DDR_MEM_SIZE) {
+ printf("DDR invalid size : 0x%lx, expected 0x%lx\n",
+ priv->info.size, DDR_MEM_SIZE);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#endif
+
+static int fu540_ddr_probe(struct udevice *dev)
+{
+ struct fu540_ddr_info *priv = dev_get_priv(dev);
+
+#if defined(CONFIG_SPL_BUILD)
+ struct regmap *map;
+ int ret;
+ u32 clock = 0;
+
+ debug("FU540 DDR probe\n");
+ priv->dev = dev;
+
+ ret = regmap_init_mem(dev_ofnode(dev), &map);
+ if (ret)
+ return ret;
+
+ ret = clk_get_by_index(dev, 0, &priv->ddr_clk);
+ if (ret) {
+ debug("clk get failed %d\n", ret);
+ return ret;
+ }
+
+ ret = dev_read_u32(dev, "clock-frequency", &clock);
+ if (ret) {
+ debug("clock-frequency not found in dt %d\n", ret);
+ return ret;
+ } else {
+ ret = clk_set_rate(&priv->ddr_clk, clock);
+ if (ret < 0) {
+ debug("Could not set DDR clock\n");
+ return ret;
+ }
+ }
+
+ ret = clk_enable(&priv->ddr_clk);
+ priv->ctl = regmap_get_range(map, 0);
+ priv->phy = regmap_get_range(map, 1);
+ priv->physical_filter_ctrl = regmap_get_range(map, 2);
+
+ priv->info.base = CONFIG_SYS_SDRAM_BASE;
+
+ priv->info.size = 0;
+ return fu540_ddr_setup(dev);
+#else
+ priv->info.base = CONFIG_SYS_SDRAM_BASE;
+ priv->info.size = DDR_MEM_SIZE;
+#endif
+ return 0;
+}
+
+static int fu540_ddr_get_info(struct udevice *dev, struct ram_info *info)
+{
+ struct fu540_ddr_info *priv = dev_get_priv(dev);
+
+ *info = priv->info;
+
+ return 0;
+}
+
+static struct ram_ops fu540_ddr_ops = {
+ .get_info = fu540_ddr_get_info,
+};
+
+static const struct udevice_id fu540_ddr_ids[] = {
+ { .compatible = "sifive,fu540-c000-ddr" },
+ { }
+};
+
+U_BOOT_DRIVER(fu540_ddr) = {
+ .name = "fu540_ddr",
+ .id = UCLASS_RAM,
+ .of_match = fu540_ddr_ids,
+ .ops = &fu540_ddr_ops,
+ .probe = fu540_ddr_probe,
+ .priv_auto_alloc_size = sizeof(struct fu540_ddr_info),
+#if defined(CONFIG_SPL_BUILD)
+ .platdata_auto_alloc_size = sizeof(struct sifive_dmc_plat),
+#endif
+};
--
2.17.1
More information about the U-Boot
mailing list