[PATCH 24/30] net: eepro100: Pass device private data around
Marek Vasut
marek.vasut at gmail.com
Sat May 23 18:38:31 CEST 2020
This patch replaces the various uses of struct eth_device for accessing
device private data with struct eepro100_priv, which is compatible both
with DM and non-DM operation.
Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
---
drivers/net/eepro100.c | 264 ++++++++++++++++++++++-------------------
1 file changed, 140 insertions(+), 124 deletions(-)
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 2c25307002..1c33ec3da2 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -203,6 +203,10 @@ static const char i82558_config_cmd[] = {
struct eepro100_priv {
struct eth_device dev;
+ pci_dev_t devno;
+ char *name;
+ void __iomem *iobase;
+ u8 *enetaddr;
};
#if defined(CONFIG_E500)
@@ -213,40 +217,40 @@ struct eepro100_priv {
#define phys_to_bus(dev, a) pci_phys_to_mem((dev), (a))
#endif
-static int INW(struct eth_device *dev, u_long addr)
+static int INW(struct eepro100_priv *priv, u_long addr)
{
- return le16_to_cpu(readw(addr + (void *)dev->iobase));
+ return le16_to_cpu(readw(addr + priv->iobase));
}
-static void OUTW(struct eth_device *dev, int command, u_long addr)
+static void OUTW(struct eepro100_priv *priv, int command, u_long addr)
{
- writew(cpu_to_le16(command), addr + (void *)dev->iobase);
+ writew(cpu_to_le16(command), addr + priv->iobase);
}
-static void OUTL(struct eth_device *dev, int command, u_long addr)
+static void OUTL(struct eepro100_priv *priv, int command, u_long addr)
{
- writel(cpu_to_le32(command), addr + (void *)dev->iobase);
+ writel(cpu_to_le32(command), addr + priv->iobase);
}
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static int INL(struct eth_device *dev, u_long addr)
+static int INL(struct eepro100_priv *priv, u_long addr)
{
- return le32_to_cpu(readl(addr + (void *)dev->iobase));
+ return le32_to_cpu(readl(addr + priv->iobase));
}
-static int get_phyreg(struct eth_device *dev, unsigned char addr,
+static int get_phyreg(struct eepro100_priv *priv, unsigned char addr,
unsigned char reg, unsigned short *value)
{
- int cmd;
int timeout = 50;
+ int cmd;
/* read requested data */
cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
- OUTL(dev, cmd, SCB_CTRL_MDI);
+ OUTL(priv, cmd, SCB_CTRL_MDI);
do {
udelay(1000);
- cmd = INL(dev, SCB_CTRL_MDI);
+ cmd = INL(priv, SCB_CTRL_MDI);
} while (!(cmd & (1 << 28)) && (--timeout));
if (timeout == 0)
@@ -257,17 +261,17 @@ static int get_phyreg(struct eth_device *dev, unsigned char addr,
return 0;
}
-static int set_phyreg(struct eth_device *dev, unsigned char addr,
+static int set_phyreg(struct eepro100_priv *priv, unsigned char addr,
unsigned char reg, unsigned short value)
{
- int cmd;
int timeout = 50;
+ int cmd;
/* write requested data */
cmd = (1 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
- OUTL(dev, cmd | value, SCB_CTRL_MDI);
+ OUTL(priv, cmd | value, SCB_CTRL_MDI);
- while (!(INL(dev, SCB_CTRL_MDI) & (1 << 28)) && (--timeout))
+ while (!(INL(priv, SCB_CTRL_MDI) & (1 << 28)) && (--timeout))
udelay(1000);
if (timeout == 0)
@@ -280,49 +284,45 @@ static int set_phyreg(struct eth_device *dev, unsigned char addr,
* Check if given phyaddr is valid, i.e. there is a PHY connected.
* Do this by checking model value field from ID2 register.
*/
-static struct eth_device *verify_phyaddr(const char *devname,
- unsigned char addr)
+static int verify_phyaddr(struct eepro100_priv *priv, unsigned char addr)
{
- struct eth_device *dev;
- unsigned short value;
- unsigned char model;
-
- dev = eth_get_dev_by_name(devname);
- if (!dev) {
- printf("%s: no such device\n", devname);
- return NULL;
- }
+ unsigned short value, model;
+ int ret;
/* read id2 register */
- if (get_phyreg(dev, addr, MII_PHYSID2, &value) != 0) {
- printf("%s: mii read timeout!\n", devname);
- return NULL;
+ ret = get_phyreg(priv, addr, MII_PHYSID2, &value);
+ if (ret) {
+ printf("%s: mii read timeout!\n", priv->name);
+ return ret;
}
/* get model */
- model = (unsigned char)((value >> 4) & 0x003f);
-
- if (model == 0) {
- printf("%s: no PHY at address %d\n", devname, addr);
- return NULL;
+ model = (value >> 4) & 0x003f;
+ if (!model) {
+ printf("%s: no PHY at address %d\n", priv->name, addr);
+ return -EINVAL;
}
- return dev;
+ return 0;
}
static int eepro100_miiphy_read(struct mii_dev *bus, int addr, int devad,
int reg)
{
+ struct eth_device *dev = eth_get_dev_by_name(bus->name);
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
unsigned short value = 0;
- struct eth_device *dev;
+ int ret;
- dev = verify_phyaddr(bus->name, addr);
- if (!dev)
- return -1;
+ ret = verify_phyaddr(priv, addr);
+ if (ret)
+ return ret;
- if (get_phyreg(dev, addr, reg, &value) != 0) {
+ ret = get_phyreg(priv, addr, reg, &value);
+ if (ret) {
printf("%s: mii read timeout!\n", bus->name);
- return -1;
+ return ret;
}
return value;
@@ -331,23 +331,26 @@ static int eepro100_miiphy_read(struct mii_dev *bus, int addr, int devad,
static int eepro100_miiphy_write(struct mii_dev *bus, int addr, int devad,
int reg, u16 value)
{
- struct eth_device *dev;
+ struct eth_device *dev = eth_get_dev_by_name(bus->name);
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
+ int ret;
- dev = verify_phyaddr(bus->name, addr);
- if (!dev)
- return -1;
+ ret = verify_phyaddr(priv, addr);
+ if (ret)
+ return ret;
- if (set_phyreg(dev, addr, reg, value) != 0) {
+ ret = set_phyreg(priv, addr, reg, value);
+ if (ret) {
printf("%s: mii write timeout!\n", bus->name);
- return -1;
+ return ret;
}
return 0;
}
-
#endif
-static void init_rx_ring(struct eth_device *dev)
+static void init_rx_ring(struct eepro100_priv *priv)
{
int i;
@@ -356,7 +359,7 @@ static void init_rx_ring(struct eth_device *dev)
rx_ring[i].control = (i == NUM_RX_DESC - 1) ?
cpu_to_le16 (RFD_CONTROL_S) : 0;
rx_ring[i].link =
- cpu_to_le32(phys_to_bus((pci_dev_t)dev->priv,
+ cpu_to_le32(phys_to_bus(priv->devno,
(u32)&rx_ring[(i + 1) %
NUM_RX_DESC]));
rx_ring[i].rx_buf_addr = 0xffffffff;
@@ -370,7 +373,7 @@ static void init_rx_ring(struct eth_device *dev)
rx_next = 0;
}
-static void purge_tx_ring(struct eth_device *dev)
+static void purge_tx_ring(struct eepro100_priv *priv)
{
tx_next = 0;
tx_threshold = 0x01208000;
@@ -382,11 +385,11 @@ static void purge_tx_ring(struct eth_device *dev)
}
/* Wait for the chip get the command. */
-static int wait_for_eepro100(struct eth_device *dev)
+static int wait_for_eepro100(struct eepro100_priv *priv)
{
int i;
- for (i = 0; INW(dev, SCB_CMD) & (CU_CMD_MASK | RU_CMD_MASK); i++) {
+ for (i = 0; INW(priv, SCB_CMD) & (CU_CMD_MASK | RU_CMD_MASK); i++) {
if (i >= TOUT_LOOP)
return 0;
}
@@ -394,7 +397,7 @@ static int wait_for_eepro100(struct eth_device *dev)
return 1;
}
-static int eepro100_txcmd_send(struct eth_device *dev,
+static int eepro100_txcmd_send(struct eepro100_priv *priv,
struct eepro100_txfd *desc)
{
u16 rstat;
@@ -403,11 +406,11 @@ static int eepro100_txcmd_send(struct eth_device *dev,
flush_dcache_range((unsigned long)desc,
(unsigned long)desc + sizeof(*desc));
- if (!wait_for_eepro100(dev))
+ if (!wait_for_eepro100(priv))
return -ETIMEDOUT;
- OUTL(dev, phys_to_bus((pci_dev_t)dev->priv, (u32)desc), SCB_POINTER);
- OUTW(dev, SCB_M | CU_START, SCB_CMD);
+ OUTL(priv, phys_to_bus(priv->devno, (u32)desc), SCB_POINTER);
+ OUTW(priv, SCB_M | CU_START, SCB_CMD);
while (true) {
invalidate_dcache_range((unsigned long)desc,
@@ -417,7 +420,7 @@ static int eepro100_txcmd_send(struct eth_device *dev,
break;
if (i++ >= TOUT_LOOP) {
- printf("%s: Tx error buffer not ready\n", dev->name);
+ printf("%s: Tx error buffer not ready\n", priv->name);
return -EINVAL;
}
}
@@ -435,42 +438,42 @@ static int eepro100_txcmd_send(struct eth_device *dev,
}
/* SROM Read. */
-static int read_eeprom(struct eth_device *dev, int location, int addr_len)
+static int read_eeprom(struct eepro100_priv *priv, int location, int addr_len)
{
unsigned short retval = 0;
int read_cmd = location | EE_READ_CMD(addr_len);
int i;
- OUTW(dev, EE_ENB & ~EE_CS, SCB_EEPROM);
- OUTW(dev, EE_ENB, SCB_EEPROM);
+ OUTW(priv, EE_ENB & ~EE_CS, SCB_EEPROM);
+ OUTW(priv, EE_ENB, SCB_EEPROM);
/* Shift the read command bits out. */
for (i = 12; i >= 0; i--) {
short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- OUTW(dev, EE_ENB | dataval, SCB_EEPROM);
+ OUTW(priv, EE_ENB | dataval, SCB_EEPROM);
udelay(1);
- OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCB_EEPROM);
+ OUTW(priv, EE_ENB | dataval | EE_SHIFT_CLK, SCB_EEPROM);
udelay(1);
}
- OUTW(dev, EE_ENB, SCB_EEPROM);
+ OUTW(priv, EE_ENB, SCB_EEPROM);
for (i = 15; i >= 0; i--) {
- OUTW(dev, EE_ENB | EE_SHIFT_CLK, SCB_EEPROM);
+ OUTW(priv, EE_ENB | EE_SHIFT_CLK, SCB_EEPROM);
udelay(1);
retval = (retval << 1) |
- ((INW(dev, SCB_EEPROM) & EE_DATA_READ) ? 1 : 0);
- OUTW(dev, EE_ENB, SCB_EEPROM);
+ !!(INW(priv, SCB_EEPROM) & EE_DATA_READ);
+ OUTW(priv, EE_ENB, SCB_EEPROM);
udelay(1);
}
/* Terminate the EEPROM access. */
- OUTW(dev, EE_ENB & ~EE_CS, SCB_EEPROM);
+ OUTW(priv, EE_ENB & ~EE_CS, SCB_EEPROM);
return retval;
}
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static int eepro100_initialize_mii(struct eth_device *dev)
+static int eepro100_initialize_mii(struct eepro100_priv *priv)
{
/* register mii command access routines */
struct mii_dev *mdiodev;
@@ -480,7 +483,7 @@ static int eepro100_initialize_mii(struct eth_device *dev)
if (!mdiodev)
return -ENOMEM;
- strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
+ strncpy(mdiodev->name, priv->name, MDIO_NAME_LEN);
mdiodev->read = eepro100_miiphy_read;
mdiodev->write = eepro100_miiphy_write;
@@ -493,7 +496,7 @@ static int eepro100_initialize_mii(struct eth_device *dev)
return 0;
}
#else
-static int eepro100_initialize_mii(struct eth_device *dev)
+static int eepro100_initialize_mii(struct eepro100_priv *priv)
{
return 0;
}
@@ -506,70 +509,72 @@ static struct pci_device_id supported[] = {
{ }
};
-static void read_hw_addr(struct eth_device *dev, bd_t *bis)
+static void read_hw_addr(struct eepro100_priv *priv, bd_t *bis)
{
u16 sum = 0;
int i, j;
- int addr_len = read_eeprom(dev, 0, 6) == 0xffff ? 8 : 6;
+ int addr_len = read_eeprom(priv, 0, 6) == 0xffff ? 8 : 6;
for (j = 0, i = 0; i < 0x40; i++) {
- u16 value = read_eeprom(dev, i, addr_len);
+ u16 value = read_eeprom(priv, i, addr_len);
sum += value;
if (i < 3) {
- dev->enetaddr[j++] = value;
- dev->enetaddr[j++] = value >> 8;
+ priv->enetaddr[j++] = value;
+ priv->enetaddr[j++] = value >> 8;
}
}
if (sum != 0xBABA) {
- memset(dev->enetaddr, 0, ETH_ALEN);
+ memset(priv->enetaddr, 0, ETH_ALEN);
debug("%s: Invalid EEPROM checksum %#4.4x, check settings before activating this device!\n",
- dev->name, sum);
+ priv->name, sum);
}
}
static int eepro100_init(struct eth_device *dev, bd_t *bis)
{
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
struct eepro100_txfd *ias_cmd, *cfg_cmd;
int ret, status = -1;
int tx_cur;
/* Reset the ethernet controller */
- OUTL(dev, I82559_SELECTIVE_RESET, SCB_PORT);
+ OUTL(priv, I82559_SELECTIVE_RESET, SCB_PORT);
udelay(20);
- OUTL(dev, I82559_RESET, SCB_PORT);
+ OUTL(priv, I82559_RESET, SCB_PORT);
udelay(20);
- if (!wait_for_eepro100(dev)) {
+ if (!wait_for_eepro100(priv)) {
printf("Error: Can not reset ethernet controller.\n");
goto done;
}
- OUTL(dev, 0, SCB_POINTER);
- OUTW(dev, SCB_M | RUC_ADDR_LOAD, SCB_CMD);
+ OUTL(priv, 0, SCB_POINTER);
+ OUTW(priv, SCB_M | RUC_ADDR_LOAD, SCB_CMD);
- if (!wait_for_eepro100(dev)) {
+ if (!wait_for_eepro100(priv)) {
printf("Error: Can not reset ethernet controller.\n");
goto done;
}
- OUTL(dev, 0, SCB_POINTER);
- OUTW(dev, SCB_M | CU_ADDR_LOAD, SCB_CMD);
+ OUTL(priv, 0, SCB_POINTER);
+ OUTW(priv, SCB_M | CU_ADDR_LOAD, SCB_CMD);
/* Initialize Rx and Tx rings. */
- init_rx_ring(dev);
- purge_tx_ring(dev);
+ init_rx_ring(priv);
+ purge_tx_ring(priv);
/* Tell the adapter where the RX ring is located. */
- if (!wait_for_eepro100(dev)) {
+ if (!wait_for_eepro100(priv)) {
printf("Error: Can not reset ethernet controller.\n");
goto done;
}
/* RX ring cache was already flushed in init_rx_ring() */
- OUTL(dev, phys_to_bus((pci_dev_t)dev->priv, (u32)&rx_ring[rx_next]),
+ OUTL(priv, phys_to_bus(priv->devno, (u32)&rx_ring[rx_next]),
SCB_POINTER);
- OUTW(dev, SCB_M | RUC_START, SCB_CMD);
+ OUTW(priv, SCB_M | RUC_START, SCB_CMD);
/* Send the Configure frame */
tx_cur = tx_next;
@@ -579,13 +584,13 @@ static int eepro100_init(struct eth_device *dev, bd_t *bis)
cfg_cmd->command = cpu_to_le16(CONFIG_SYS_CMD_SUSPEND |
CONFIG_SYS_CMD_CONFIGURE);
cfg_cmd->status = 0;
- cfg_cmd->link = cpu_to_le32(phys_to_bus((pci_dev_t)dev->priv,
+ cfg_cmd->link = cpu_to_le32(phys_to_bus(priv->devno,
(u32)&tx_ring[tx_next]));
memcpy(((struct descriptor *)cfg_cmd)->params, i82558_config_cmd,
sizeof(i82558_config_cmd));
- ret = eepro100_txcmd_send(dev, cfg_cmd);
+ ret = eepro100_txcmd_send(priv, cfg_cmd);
if (ret) {
if (ret == -ETIMEDOUT)
printf("Error---CONFIG_SYS_CMD_CONFIGURE: Can not reset ethernet controller.\n");
@@ -600,12 +605,12 @@ static int eepro100_init(struct eth_device *dev, bd_t *bis)
ias_cmd->command = cpu_to_le16(CONFIG_SYS_CMD_SUSPEND |
CONFIG_SYS_CMD_IAS);
ias_cmd->status = 0;
- ias_cmd->link = cpu_to_le32(phys_to_bus((pci_dev_t)dev->priv,
+ ias_cmd->link = cpu_to_le32(phys_to_bus(priv->devno,
(u32)&tx_ring[tx_next]));
- memcpy(((struct descriptor *)ias_cmd)->params, dev->enetaddr, 6);
+ memcpy(((struct descriptor *)ias_cmd)->params, priv->enetaddr, 6);
- ret = eepro100_txcmd_send(dev, ias_cmd);
+ ret = eepro100_txcmd_send(priv, ias_cmd);
if (ret) {
if (ret == -ETIMEDOUT)
printf("Error: Can not reset ethernet controller.\n");
@@ -620,12 +625,14 @@ done:
static int eepro100_send(struct eth_device *dev, void *packet, int length)
{
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
struct eepro100_txfd *desc;
int ret, status = -1;
int tx_cur;
if (length <= 0) {
- printf("%s: bad packet size: %d\n", dev->name, length);
+ printf("%s: bad packet size: %d\n", priv->name, length);
goto done;
}
@@ -637,19 +644,19 @@ static int eepro100_send(struct eth_device *dev, void *packet, int length)
TXCB_CMD_S | TXCB_CMD_EL);
desc->status = 0;
desc->count = cpu_to_le32(tx_threshold);
- desc->link = cpu_to_le32(phys_to_bus((pci_dev_t)dev->priv,
- (u32)&tx_ring[tx_next]));
- desc->tx_desc_addr = cpu_to_le32(phys_to_bus((pci_dev_t)dev->priv,
+ desc->link = cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)&tx_ring[tx_next]));
+ desc->tx_desc_addr = cpu_to_le32(phys_to_bus(priv->devno,
(u32)&desc->tx_buf_addr0));
- desc->tx_buf_addr0 = cpu_to_le32(phys_to_bus((pci_dev_t)dev->priv,
+ desc->tx_buf_addr0 = cpu_to_le32(phys_to_bus(priv->devno,
(u_long)packet));
desc->tx_buf_size0 = cpu_to_le32(length);
- ret = eepro100_txcmd_send(dev, &tx_ring[tx_cur]);
+ ret = eepro100_txcmd_send(priv, &tx_ring[tx_cur]);
if (ret) {
if (ret == -ETIMEDOUT)
printf("%s: Tx error ethernet controller not ready.\n",
- dev->name);
+ priv->name);
goto done;
}
@@ -661,12 +668,14 @@ done:
static int eepro100_recv(struct eth_device *dev)
{
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
struct eepro100_rxfd *desc;
int rx_prev, length = 0;
u16 status, stat;
- stat = INW(dev, SCB_STATUS);
- OUTW(dev, stat & SCB_STATUS_RNR, SCB_STATUS);
+ stat = INW(priv, SCB_STATUS);
+ OUTW(priv, stat & SCB_STATUS_RNR, SCB_STATUS);
for (;;) {
desc = &rx_ring[rx_next];
@@ -706,20 +715,20 @@ static int eepro100_recv(struct eth_device *dev)
}
if (stat & SCB_STATUS_RNR) {
- printf("%s: Receiver is not ready, restart it !\n", dev->name);
+ printf("%s: Receiver is not ready, restart it !\n", priv->name);
/* Reinitialize Rx ring. */
- init_rx_ring(dev);
+ init_rx_ring(priv);
- if (!wait_for_eepro100(dev)) {
+ if (!wait_for_eepro100(priv)) {
printf("Error: Can not restart ethernet controller.\n");
goto done;
}
/* RX ring cache was already flushed in init_rx_ring() */
- OUTL(dev, phys_to_bus((pci_dev_t)dev->priv,
- (u32)&rx_ring[rx_next]), SCB_POINTER);
- OUTW(dev, SCB_M | RUC_START, SCB_CMD);
+ OUTL(priv, phys_to_bus(priv->devno,
+ (u32)&rx_ring[rx_next]), SCB_POINTER);
+ OUTW(priv, SCB_M | RUC_START, SCB_CMD);
}
done:
@@ -728,26 +737,29 @@ done:
static void eepro100_halt(struct eth_device *dev)
{
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
+
/* Reset the ethernet controller */
- OUTL(dev, I82559_SELECTIVE_RESET, SCB_PORT);
+ OUTL(priv, I82559_SELECTIVE_RESET, SCB_PORT);
udelay(20);
- OUTL(dev, I82559_RESET, SCB_PORT);
+ OUTL(priv, I82559_RESET, SCB_PORT);
udelay(20);
- if (!wait_for_eepro100(dev)) {
+ if (!wait_for_eepro100(priv)) {
printf("Error: Can not reset ethernet controller.\n");
goto done;
}
- OUTL(dev, 0, SCB_POINTER);
- OUTW(dev, SCB_M | RUC_ADDR_LOAD, SCB_CMD);
+ OUTL(priv, 0, SCB_POINTER);
+ OUTW(priv, SCB_M | RUC_ADDR_LOAD, SCB_CMD);
- if (!wait_for_eepro100(dev)) {
+ if (!wait_for_eepro100(priv)) {
printf("Error: Can not reset ethernet controller.\n");
goto done;
}
- OUTL(dev, 0, SCB_POINTER);
- OUTW(dev, SCB_M | CU_ADDR_LOAD, SCB_CMD);
+ OUTL(priv, 0, SCB_POINTER);
+ OUTW(priv, SCB_M | CU_ADDR_LOAD, SCB_CMD);
done:
return;
@@ -798,8 +810,12 @@ int eepro100_initialize(bd_t *bis)
dev = &priv->dev;
sprintf(dev->name, "i82559#%d", card_number);
- dev->priv = (void *)devno; /* this have to come before bus_to_phys() */
- dev->iobase = bus_to_phys(devno, iobase);
+ priv->name = dev->name;
+ /* this have to come before bus_to_phys() */
+ priv->devno = devno;
+ priv->iobase = (void __iomem *)bus_to_phys(devno, iobase);
+ priv->enetaddr = dev->enetaddr;
+
dev->init = eepro100_init;
dev->halt = eepro100_halt;
dev->send = eepro100_send;
@@ -807,7 +823,7 @@ int eepro100_initialize(bd_t *bis)
eth_register(dev);
- ret = eepro100_initialize_mii(dev);
+ ret = eepro100_initialize_mii(priv);
if (ret) {
eth_unregister(dev);
free(priv);
@@ -821,7 +837,7 @@ int eepro100_initialize(bd_t *bis)
udelay(10 * 1000);
- read_hw_addr(dev, bis);
+ read_hw_addr(priv, bis);
}
return card_number;
--
2.25.1
More information about the U-Boot
mailing list