[PATCH v2 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64

[Kurt Miller]

On Mon, 2020-05-25 at 11:00 +0200, Mark Kettenis wrote:
> Enable CONFIG_PCI and CONFIG_NVME and related configs for the
> ROCKPro64 board.
> 
> Signed-off-by: Mark Kettenis <kettenis at openbsd.org>

Tested by: Kurt Miller <kurt at intricatesoftware.com>

Model: Pine64 RockPro64 v2.1

=> pci
Scanning PCI devices on bus 0
BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
_____________________________________________________________
00.00.00   0x1d87     0x0100     Bridge device           0x04
=> pci 1
Scanning PCI devices on bus 1
BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
_____________________________________________________________
01.00.00   0x1b4b     0x9128     Mass storage controller 0x06

> ---
> Changes in v2:
> - Extend commit message
> 
>  configs/rockpro64-rk3399_defconfig | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
> index 95037a191d..b472167283 100644
> --- a/configs/rockpro64-rk3399_defconfig
> +++ b/configs/rockpro64-rk3399_defconfig
> @@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_USB=y
> +CONFIG_CMD_PCI=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_TIME=y
>  CONFIG_SPL_OF_CONTROL=y
> @@ -38,10 +39,13 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
>  CONFIG_DM_ETH=y
>  CONFIG_ETH_DESIGNWARE=y
>  CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_NVME=y
> +CONFIG_PCI=y
>  CONFIG_PMIC_RK8XX=y
>  CONFIG_REGULATOR_PWM=y
>  CONFIG_REGULATOR_RK8XX=y
>  CONFIG_PWM_ROCKCHIP=y
> +CONFIG_DM_RESET=y
>  CONFIG_RAM_RK3399_LPDDR4=y
>  CONFIG_BAUDRATE=115200
>  CONFIG_DEBUG_UART_SHIFT=2