[PATCH] arch: arm: uDPU: fix PHY mode definition to sgmii-2500

[Jakov Petrina]

On 12/05/2020 12:02, Jakov Petrina wrote:
> Commit f49ac7e1c4 switched the default PHY speed to 3.125Gbit to resolve
> issues with SFP modules. However, U-Boot does not have a "2500base-x"
> phy-mode.
> 
> Resolve this by using "sgmii-2500" instead.
> 
> Signed-off-by: Jakov Petrina <jakov.petrina at sartura.hr>
> Signed-off-by: Vladimir Vid <vladimir.vid at sartura.hr>
> Cc: Luka Perkov <luka.perkov at sartura.hr>
> Cc: Stefan Roese <sr at denx.de>
> ---
>   arch/arm/dts/armada-3720-uDPU.dts | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 

Hi Stefan,

I'm curious if there are any feedback or blockers on this patch?

Thanks,
Jakov

> diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
> index 07c7b91175..7f4b8222f4 100644
> --- a/arch/arm/dts/armada-3720-uDPU.dts
> +++ b/arch/arm/dts/armada-3720-uDPU.dts
> @@ -125,14 +125,14 @@
>   &eth0 {
>   	pinctrl-0 = <&pcie_pins>;
>   	status = "okay";
> -	phy-mode = "2500base-x";
> +	phy-mode = "sgmii-2500";
>   	managed = "in-band-status";
>   	phy = <&ethphy0>;
>   };
>   
>   &eth1 {
>   	status = "okay";
> -	phy-mode = "2500base-x";
> +	phy-mode = "sgmii-2500";
>   	managed = "in-band-status";
>   	phy = <&ethphy1>;
>   };
> 


-- 
Jakov Petrina