[PATCH v3 5/6] rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2

Jagan Teki jagan at amarulasolutions.com
Sat May 9 18:56:23 CEST 2020


Enable PCIe/M.2 support on
- NanoPC-T4
- ROC-RK3399-PC Mezzanine boards.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v3:
- none

 arch/arm/dts/rk3399-u-boot.dtsi           | 1 +
 configs/nanopc-t4-rk3399_defconfig        | 4 ++++
 configs/roc-pc-mezzanine-rk3399_defconfig | 4 ++++
 3 files changed, 9 insertions(+)

diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
index 9bb130a92a..d66d5b6a38 100644
--- a/arch/arm/dts/rk3399-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -8,6 +8,7 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
+		pci0 = &pcie0;
 	};
 
 	cic: syscon at ff620000 {
diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
index ae865908d8..3bb5b498f2 100644
--- a/configs/nanopc-t4-rk3399_defconfig
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -18,6 +18,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_PCI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
@@ -34,10 +35,13 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME=y
+CONFIG_PCI=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYSRESET=y
diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig
index 5a694edc03..0b853805f3 100644
--- a/configs/roc-pc-mezzanine-rk3399_defconfig
+++ b/configs/roc-pc-mezzanine-rk3399_defconfig
@@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_PCI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
@@ -36,11 +37,14 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME=y
+CONFIG_PCI=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_ROCKCHIP_SPI=y
-- 
2.17.1



More information about the U-Boot mailing list