[PATCH v3 1/2] arm: rpi: Add function to trigger VL805's firmware load

[Bin Meng]

Hi Nicolas,

On Wed, May 6, 2020 at 12:26 AM Nicolas Saenz Julienne
<nsaenzjulienne at suse.de> wrote:
>
> On the Raspberry Pi 4, after a PCI reset, VL805's (a xHCI chip) firmware
> may either be loaded directly from an EEPROM or, if not present, by the
> SoC's VideCore (the SoC's co-processor). Introduce the function that
> informs VideCore that VL805 may need its firmware loaded.
>

I still did not get it. Without the firmware being loaded, does xHCI
on RPi 4 still work? What exact functionality does the firmware
provide?

> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
>
> ---
> Changes since v2:
>  - Correct wrong function name in comment
>  - Add better comment on rpi_firmware_init_vl805()
>
> Changes since v1:
>  - Rename function so it's not mistaken with regular firmware loading
>
>  arch/arm/mach-bcm283x/include/mach/mbox.h | 13 +++++++
>  arch/arm/mach-bcm283x/include/mach/msg.h  |  7 ++++
>  arch/arm/mach-bcm283x/msg.c               | 45 +++++++++++++++++++++++
>  3 files changed, 65 insertions(+)
>

Regards,
Bin