[PATCH 3/3] net: tsec: Access TBI PHY through the corresponding MII

[Z.q. Hou]

Hi Vladimir,

Thanks a lot for your review and test!

> -----Original Message-----
> From: Vladimir Oltean <olteanv at gmail.com>
> Sent: 2020年5月3日 19:35
> To: Z.q. Hou <zhiqiang.hou at nxp.com>
> Cc: u-boot <u-boot at lists.denx.de>; Joe Hershberger
> <joe.hershberger at ni.com>; Bin Meng <bmeng.cn at gmail.com>; Priyanka
> Jain <priyanka.jain at nxp.com>
> Subject: Re: [PATCH 3/3] net: tsec: Access TBI PHY through the
> corresponding MII
> 
> On Sun, 3 May 2020 at 09:28, Zhiqiang Hou <Zhiqiang.Hou at nxp.com>
> wrote:
> >
> > From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> >
> > When an eTSEC is configured to use TBI, configuration of the TBI is
> > done through the MIIM registers for that eTSEC.
> > For example, if a TBI interface is required on eTSEC2, then the MIIM
> > registers starting at offset 0x2_5520 are used to configure it.
> >
> > Fixes: 9a1d6af55ecd ("net: tsec: Add driver model ethernet support")
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> > ---
> >  drivers/net/tsec.c | 17 ++++++++++++++---
> >  1 file changed, 14 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index
> > ce41aec5cf..31056f3117 100644
> > --- a/drivers/net/tsec.c
> > +++ b/drivers/net/tsec.c
> > @@ -789,6 +789,7 @@ int tsec_probe(struct udevice *dev)  {
> >         struct eth_pdata *pdata = dev_get_platdata(dev);
> >         struct tsec_private *priv = dev_get_priv(dev);
> > +       struct tsec_mii_mng __iomem *ext_phyregs_mii;
> >         struct ofnode_phandle_args phandle_args;
> >         u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE;
> >         struct fsl_pq_mdio_info mdio_info; @@ -820,8 +821,8 @@ int
> > tsec_probe(struct udevice *dev)
> >         if (reg == FDT_ADDR_T_NONE)
> >                 return -ENOENT;
> >
> > -       priv->phyregs_sgmii = map_physmem(reg +
> TSEC_MDIO_REGS_OFFSET, 0,
> > -                                         MAP_NOCACHE);
> > +       ext_phyregs_mii = map_physmem(reg +
> TSEC_MDIO_REGS_OFFSET, 0,
> > +                                     MAP_NOCACHE);
> >
> >         ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0,
> 0,
> >                                          &phandle_args); @@
> -830,6
> > +831,16 @@ int tsec_probe(struct udevice *dev)
> >
> >         priv->tbiaddr = tbiaddr;
> >
> > +       parent = ofnode_get_parent(phandle_args.node);
> > +       if (!ofnode_valid(parent)) {
> > +               printf("No parent node for TBI PHY?\n");
> > +               return -ENOENT;
> > +       }
> > +
> > +       reg = ofnode_get_addr_index(parent, 0);
> 
> Missing a check
> 
>     if (reg == FDT_ADDR_T_NONE)
>         return -ENOENT;
> 
> here?

Yes, will fix in v2.

Thanks,
Zhiqiang

> 
> > +       priv->phyregs_sgmii = map_physmem(reg +
> TSEC_MDIO_REGS_OFFSET, 0,
> > +                                         MAP_NOCACHE);
> > +
> >         phy_mode = dev_read_prop(dev, "phy-connection-type", NULL);
> >         if (phy_mode)
> >                 pdata->phy_interface =
> > phy_get_interface_by_name(phy_mode);
> > @@ -844,7 +855,7 @@ int tsec_probe(struct udevice *dev)
> >         if (priv->interface == PHY_INTERFACE_MODE_SGMII)
> >                 priv->flags |= TSEC_SGMII;
> >
> > -       mdio_info.regs = priv->phyregs_sgmii;
> > +       mdio_info.regs = ext_phyregs_mii;
> >         mdio_info.name = (char *)dev->name;
> >         ret = fsl_pq_mdio_init(NULL, &mdio_info);
> >         if (ret)
> > --
> > 2.17.1
> >
> 
> With that:
> 
> Reviewed-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> Tested-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> 
> (on LS1021A)
> 
> Thanks!
> -Vladimir