[PATCH 2/5] pinctrl: bcm283x: DM_FLAG_PRE_RELOC: Remove OF_CONTROL check

[Ovidiu Panait]

Remove CONFIG_IS_ENABLED(OF_CONTROL) check from DM_FLAG_PRE_RELOC, since
this driver only supports OF_CONTROL.

drivers/pinctrl/broadcom/Kconfig:
config PINCTRL_BCM283X
    depends on ARCH_BCM283X && PINCTRL_FULL && OF_CONTROL

Signed-off-by: Ovidiu Panait <ovidiu.panait at windriver.com>
---

 drivers/pinctrl/broadcom/pinctrl-bcm283x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/broadcom/pinctrl-bcm283x.c b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c
index f44af6cf9a..8bf7916627 100644
--- a/drivers/pinctrl/broadcom/pinctrl-bcm283x.c
+++ b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c
@@ -150,7 +150,7 @@ U_BOOT_DRIVER(pinctrl_bcm283x) = {
 	.priv_auto_alloc_size = sizeof(struct bcm283x_pinctrl_priv),
 	.ops		= &bcm283x_pinctrl_ops,
 	.probe		= bcm283x_pinctl_probe,
-#if !CONFIG_IS_ENABLED(OF_CONTROL) || CONFIG_IS_ENABLED(OF_BOARD)
+#if CONFIG_IS_ENABLED(OF_BOARD)
 	.flags		= DM_FLAG_PRE_RELOC,
 #endif
 };
-- 
2.17.1