wandboard does not boot with current mainline

[Heiko Schocher]

Hello Fabio,

I have my wandboard DL in my automated daily build setup example:

http://xeidos.ddns.net/ubtestresults/

and wondered, why my last result is from may 4th ...

(Ok, there is a bug, that I do not see not booting boards in this page,
  but this is just a proof of concept page ...)


So, what I see is:

│   │   ├─UBOOT (wandboard-uboot)
│   │   │    <> Connecting to 
/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0, speed 115200
│   │   │    <>  Escape character: Ctrl-\ (ASCII 28, FS): enabled
│   │   │    <> Type the escape character followed by C to get back,
│   │   │    <> or followed by ? to see other options.
│   │   │    <> ----------------------------------------------------
│   │   │    <>
│   │   │    <> U-Boot SPL 2020.07-rc1-tbot-00298-g425fefa9a3 (May 05 2020 - 04:18:47 +0200)
│   │   │    <> Trying to boot from MMC1


and no more output ...

Do you have any idea, what is wrong with current mainline?

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de