wandboard does not boot with current mainline

[Heiko Schocher]

Hello Fabio,

Am 07.05.2020 um 14:12 schrieb Heiko Schocher:
> Hello Fabio,
> 
> I have my wandboard DL in my automated daily build setup example:
> 
> http://xeidos.ddns.net/ubtestresults/
> 
> and wondered, why my last result is from may 4th ...
> 
> (Ok, there is a bug, that I do not see not booting boards in this page,
>   but this is just a proof of concept page ...)

Ok, found this error, now I have one broken build in above webpage.
Also, the newest commit adds > 300 bytes imge size...

http://xeidos.ddns.net/ubtestresults/stats/wandboard_defconfig/6

Unfortunately I cannot automate git bisect with tbot:

http://tbot.tools/modules/tc.html#tbot.tc.git.GitRepository.bisect

as I do not know how to switch for example with an gpio and a relay
bootmode on wandboard ... do you know, if this is possible?

Thanks!

> 
> 
> So, what I see is:
> 
> │   │   ├─UBOOT (wandboard-uboot)
> │   │   │    <> Connecting to 
> /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0, speed 115200
> │   │   │    <>  Escape character: Ctrl-\ (ASCII 28, FS): enabled
> │   │   │    <> Type the escape character followed by C to get back,
> │   │   │    <> or followed by ? to see other options.
> │   │   │    <> ----------------------------------------------------
> │   │   │    <>
> │   │   │    <> U-Boot SPL 2020.07-rc1-tbot-00298-g425fefa9a3 (May 05 2020 - 04:18:47 +0200)
> │   │   │    <> Trying to boot from MMC1
> 
> 
> and no more output ...
> 
> Do you have any idea, what is wrong with current mainline?
> 
> bye,
> Heiko

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de