[PATCH 4/8] drivers: ddr: imx8m: add print for DRAM rate

[Fabio Estevam]

Hi Peng,

On Mon, May 11, 2020 at 6:30 AM Peng Fan <peng.fan at nxp.com> wrote:
>
> From: Ye Li <ye.li at nxp.com>
>
> Enable print to show the DRAM rate of current setting and training
> result.
>
> Reviewed-by: Peng Fan <peng.fan at nxp.com>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Signed-off-by:  Peng Fan <peng.fan at nxp.com>

This is basically a revert from:

commit 0d3bc81391ac031758affdb0811bc9c8b905978c
Author: Fabio Estevam <festevam at gmail.com>
Date:   Wed Dec 11 17:37:09 2019 -0300

    imx8m: ddr_init: Move ddr_init() messages to debug level

    Currently inside ddr_init() there is a mix of printf() and debug()
    level messages.

    Since this type of information is useful for debug purposes,
    convert all of them to debug level for consistency.

    Signed-off-by: Fabio Estevam <festevam at gmail.com>
    Reviewed-by: Peng Fan <peng.fan at nxp.com>

In the normal boot cases I don't think these messages are helpful.

> diff --git a/drivers/ddr/imx/imx8m/ddrphy_utils.c b/drivers/ddr/imx/imx8m/ddrphy_utils.c
> index 9ac7ca923c..9d2378d7dd 100644
> --- a/drivers/ddr/imx/imx8m/ddrphy_utils.c
> +++ b/drivers/ddr/imx/imx8m/ddrphy_utils.c
> @@ -97,7 +97,7 @@ int wait_ddrphy_training_complete(void)
>                         debug("Training PASS\n");
>                         return 0;
>                 } else if (mail == 0xff) {
> -                       debug("Training FAILED\n");
> +                       printf("Training FAILED\n");

This one is an error message, so I agree that it is useful to have it printed.