[PATCH v1 10/10] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support

Stefan Roese sr at denx.de
Sat May 2 10:59:44 CEST 2020


This patch adds very basic minimal support for the Marvell Octeon 3
CN73xx based EBB7304 EVK. Please note that the basic Octeon port does
not support DDR3/4 initialization yet. To still use U-Boot on with this
port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot
to the prompt on this board.

Supported devices:
- UART
- reset
- CFI parallel NOR flash

Signed-off-by: Stefan Roese <sr at denx.de>

---

 arch/mips/dts/Makefile                   |  1 +
 arch/mips/dts/mrvl,octeon-ebb7304.dts    | 96 ++++++++++++++++++++++++
 arch/mips/mach-octeon/Kconfig            | 14 ++++
 board/Marvell/octeon_ebb7304/Kconfig     | 19 +++++
 board/Marvell/octeon_ebb7304/MAINTAINERS |  7 ++
 board/Marvell/octeon_ebb7304/Makefile    |  8 ++
 board/Marvell/octeon_ebb7304/board.c     | 12 +++
 configs/octeon_ebb7304_defconfig         | 34 +++++++++
 include/configs/octeon_common.h          | 29 +++++++
 include/configs/octeon_ebb7304.h         | 20 +++++
 10 files changed, 240 insertions(+)
 create mode 100644 arch/mips/dts/mrvl,octeon-ebb7304.dts
 create mode 100644 board/Marvell/octeon_ebb7304/Kconfig
 create mode 100644 board/Marvell/octeon_ebb7304/MAINTAINERS
 create mode 100644 board/Marvell/octeon_ebb7304/Makefile
 create mode 100644 board/Marvell/octeon_ebb7304/board.c
 create mode 100644 configs/octeon_ebb7304_defconfig
 create mode 100644 include/configs/octeon_common.h
 create mode 100644 include/configs/octeon_ebb7304.h

diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index f711e9fb59..dc85901dca 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -18,6 +18,7 @@ dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
 dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
 dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
 dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb
+dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
 dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f at st1704.dtb
diff --git a/arch/mips/dts/mrvl,octeon-ebb7304.dts b/arch/mips/dts/mrvl,octeon-ebb7304.dts
new file mode 100644
index 0000000000..4e9c2de7d4
--- /dev/null
+++ b/arch/mips/dts/mrvl,octeon-ebb7304.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell / Cavium Inc. EVB CN7300
+ */
+
+/dts-v1/;
+
+/include/ "mrvl,cn73xx.dtsi"
+
+/ {
+	model = "cavium,ebb7304";
+	compatible = "cavium,ebb7304";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&bootbus {
+	/*
+	 * bootbus CS0 for CFI flash is remapped (0x1fc0.0000 -> 1f40.0000)
+	 * as the initial size is too small for the 8MiB flash device
+	 */
+	ranges = <0 0  0       0x1f400000  0xc00000>,
+		 <1 0  0x10000 0x10000000  0>,
+		 <2 0  0x10000 0x20000000  0>,
+		 <3 0  0x10000 0x30000000  0>,
+		 <4 0  0       0x1d020000  0x10000>,
+		 <5 0  0x10000 0x50000000  0>,
+		 <6 0  0x10000 0x60000000  0>,
+		 <7 0  0x10000 0x70000000  0>;
+
+	cavium,cs-config at 0 {
+		compatible = "cavium,octeon-3860-bootbus-config";
+		cavium,cs-index = <0>;
+		cavium,t-adr  = <10>;
+		cavium,t-ce   = <50>;
+		cavium,t-oe   = <50>;
+		cavium,t-we   = <35>;
+		cavium,t-rd-hld = <25>;
+		cavium,t-wr-hld = <35>;
+		cavium,t-pause  = <0>;
+		cavium,t-wait   = <50>;
+		cavium,t-page   = <30>;
+		cavium,t-rd-dly = <0>;
+		cavium,page-mode = <1>;
+		cavium,pages     = <8>;
+		cavium,bus-width = <8>;
+	};
+
+	cavium,cs-config at 4 {
+		compatible = "cavium,octeon-3860-bootbus-config";
+		cavium,cs-index = <4>;
+		cavium,t-adr  = <10>;
+		cavium,t-ce   = <10>;
+		cavium,t-oe   = <160>;
+		cavium,t-we   = <100>;
+		cavium,t-rd-hld = <10>;
+		cavium,t-wr-hld = <0>;
+		cavium,t-pause  = <50>;
+		cavium,t-wait   = <50>;
+		cavium,t-page   = <10>;
+		cavium,t-rd-dly = <10>;
+		cavium,pages     = <0>;
+		cavium,bus-width = <8>;
+	};
+
+	flash0: nor at 0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition at 0 {
+			label = "bootloader";
+			reg = <0 0x340000>;
+			read-only;
+		};
+		partition at 300000 {
+			label = "storage";
+			reg = <0x340000 0x4be000>;
+		};
+		partition at 7fe000 {
+			label = "environment";
+			reg = <0x7fe000 0x2000>;
+			read-only;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <1200000000>;
+};
diff --git a/arch/mips/mach-octeon/Kconfig b/arch/mips/mach-octeon/Kconfig
index 67fcb6058c..3b615e71ac 100644
--- a/arch/mips/mach-octeon/Kconfig
+++ b/arch/mips/mach-octeon/Kconfig
@@ -36,6 +36,18 @@ config SOC_OCTEON3
 
 endchoice
 
+choice
+	prompt "Octeon 3 board select"
+	default TARGET_OCTEON_EBB7304
+
+config TARGET_OCTEON_EBB7304
+	bool "Marvell Octeon EBB7304"
+	select OCTEON_CN73XX
+	help
+	 Choose this for the Octeon EBB7304 board
+
+endchoice
+
 config SYS_DCACHE_SIZE
 	default 32768
 
@@ -89,4 +101,6 @@ config OCTEON_L2_MEMCPY_ADDR
 	 This specifies where U-Boot will place the memcpy routine used for
 	 copying U-Boot from flash to L2 cache.
 
+source "board/Marvell/octeon_ebb7304/Kconfig"
+
 endmenu
diff --git a/board/Marvell/octeon_ebb7304/Kconfig b/board/Marvell/octeon_ebb7304/Kconfig
new file mode 100644
index 0000000000..ab54e6dbbc
--- /dev/null
+++ b/board/Marvell/octeon_ebb7304/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_OCTEON_EBB7304
+
+config SYS_BOARD
+	string
+	default "octeon_ebb7304"
+
+config SYS_VENDOR
+	string
+	default "Marvell"
+
+config SYS_CONFIG_NAME
+	string
+	default "octeon_ebb7304"
+
+config DEFAULT_DEVICE_TREE
+	string
+	default "mrvl,octeon-ebb7304"
+
+endif
diff --git a/board/Marvell/octeon_ebb7304/MAINTAINERS b/board/Marvell/octeon_ebb7304/MAINTAINERS
new file mode 100644
index 0000000000..f52beacbac
--- /dev/null
+++ b/board/Marvell/octeon_ebb7304/MAINTAINERS
@@ -0,0 +1,7 @@
+OCTEON_EBB7304 BOARD
+M:	Aaron Williams <awilliams at marvell.com>
+S:	Maintained
+F:	board/Marvell/octeon_ebb7304
+F:	configs/octeon_ebb7304_defconfig
+F:	include/configs/octeon_ebb7304.h
+F:	arch/mips/dts/mrvl,octeon-ebb7304.dts
diff --git a/board/Marvell/octeon_ebb7304/Makefile b/board/Marvell/octeon_ebb7304/Makefile
new file mode 100644
index 0000000000..8c6ffb9328
--- /dev/null
+++ b/board/Marvell/octeon_ebb7304/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2016 Stefan Roese <sr at denx.de>
+# Copyright (C) 2019 Marvell International Ltd.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= board.o
diff --git a/board/Marvell/octeon_ebb7304/board.c b/board/Marvell/octeon_ebb7304/board.c
new file mode 100644
index 0000000000..41ac18b952
--- /dev/null
+++ b/board/Marvell/octeon_ebb7304/board.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Stefan Roese <sr at denx.de>
+ */
+
+#include <common.h>
+#include <dm.h>
+
+/*
+ * Nothing included right now. Code will be added in follow-up
+ * patches.
+ */
diff --git a/configs/octeon_ebb7304_defconfig b/configs/octeon_ebb7304_defconfig
new file mode 100644
index 0000000000..5fe56ac6bc
--- /dev/null
+++ b/configs/octeon_ebb7304_defconfig
@@ -0,0 +1,34 @@
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0xFFFFFFFFC0000000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_DEBUG_UART_BASE=0x8001180000000800
+CONFIG_DEBUG_UART_CLOCK=1200000000
+CONFIG_ARCH_OCTEON=y
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_ADDR=0x1FBFE000
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_ETH=y
+CONFIG_DEBUG_UART_SHIFT=3
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_OCTEON=y
+CONFIG_HEXDUMP=y
diff --git a/include/configs/octeon_common.h b/include/configs/octeon_common.h
new file mode 100644
index 0000000000..b805d09ac1
--- /dev/null
+++ b/include/configs/octeon_common.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019-2020
+ * Marvell <www.marvell.com>
+ */
+
+#ifndef __OCTEON_COMMON_H__
+#define __OCTEON_COMMON_H__
+
+#ifndef __ASSEMBLY__
+extern int octeon_get_timer_freq(void);
+#endif
+
+#define CONFIG_SYS_MIPS_TIMER_FREQ	octeon_get_timer_freq()
+
+/* No DDR init yet -> run in L2 cache with limited resources */
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_SDRAM_BASE		(0xffffffffc0000000 + 0x100000)
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + (1 << 20))
+
+/*
+ * Set a max image size for the image (incl. DTB), so that a growing
+ * image will not exceed this maximum size
+ */
+#define CONFIG_BOARD_SIZE_LIMIT		0x100000	/* 1MiB */
+
+#endif /* __OCTEON_COMMON_H__ */
diff --git a/include/configs/octeon_ebb7304.h b/include/configs/octeon_ebb7304.h
new file mode 100644
index 0000000000..04fe4dfe22
--- /dev/null
+++ b/include/configs/octeon_ebb7304.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019-2020
+ * Marvell <www.marvell.com>
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#include "octeon_common.h"
+
+/*
+ * CFI flash
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
+
+#endif /* __CONFIG_H__ */
-- 
2.26.2



More information about the U-Boot mailing list