[PATCHv2 1/3] doc: dt-bindings: tsec: Correct the Ethernet port compatible string

Zhiqiang Hou Zhiqiang.Hou at nxp.com
Sun May 3 16:48:41 CEST 2020


From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

Change the compatible string to "fsl,etsec2" for the Ethernet ports,
which is used in the current driver's match table.

Fixes: 69a00875e3db ("doc: dt-bindings: Describe Freescale TSEC ethernet controller")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
Acked-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
V2:
 - No change.

 doc/device-tree-bindings/net/fsl-tsec-phy.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/doc/device-tree-bindings/net/fsl-tsec-phy.txt b/doc/device-tree-bindings/net/fsl-tsec-phy.txt
index 59989e3b09..8e8574bc97 100644
--- a/doc/device-tree-bindings/net/fsl-tsec-phy.txt
+++ b/doc/device-tree-bindings/net/fsl-tsec-phy.txt
@@ -2,7 +2,7 @@
 
 Properties:
 
-  - compatible : Should be "fsl,tsec"
+  - compatible : Should be "fsl,etsec2"
   - reg : Offset and length of the register set for the device
   - phy-handle : See ethernet.txt file in the same directory.
   - phy-connection-type : See ethernet.txt file in the same directory. This
@@ -12,7 +12,7 @@ Properties:
 
 Example:
 	ethernet at 24000 {
-		compatible = "fsl,tsec";
+		compatible = "fsl,etsec2";
 		reg = <0x24000 0x1000>;
 		phy-handle = <&phy0>;
 		phy-connection-type = "sgmii";
-- 
2.17.1



More information about the U-Boot mailing list