[PATCH 3/3] doc: rockchip: Remove list of supported boards

[Kever Yang]

On 2020/5/22 下午10:14, Walter Lozano wrote:
> As documentation is being moved to doc/boards/rockchip create a warning
> message and remove the redundant list of supported boards.
>
> Signed-off-by: Walter Lozano <walter.lozano at collabora.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   doc/README.rockchip | 72 +++------------------------------------------
>   1 file changed, 4 insertions(+), 68 deletions(-)
>
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index 70c8798ed2..154166ec78 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -8,6 +8,10 @@ U-Boot on Rockchip
>   
>   A wide range of Rockchip SoCs are supported in mainline U-Boot
>   
> +Warning
> +=======
> +This document is being moved to doc/board/rockchip, so information on it
> +might be incomplete or outdated.
>   
>   Prerequisites
>   =============
> @@ -24,77 +28,9 @@ You will need:
>      - Suitable ARM cross compiler, e.g.:
>           sudo apt-get install gcc-4.7-arm-linux-gnueabi
>   
> -
>   Building
>   ========
>   
> -At present 11 RK3288 boards are supported:
> -
> -   - EVB RK3288 - use evb-rk3288 configuration
> -   - Firefly RK3288 - use firefly-rk3288 configuration
> -   - Hisense Chromebook - use chromebook_jerry configuration
> -   - Asus C100P Chromebook - use chromebook_minnie configuration
> -   - Asus Chromebit - use chromebook_mickey configuration
> -   - MiQi RK3288 - use miqi-rk3288 configuration
> -   - phyCORE-RK3288 RDK - use phycore-rk3288 configuration
> -   - PopMetal RK3288 - use popmetal-rk3288 configuration
> -   - Radxa Rock 2 - use rock2 configuration
> -   - Tinker RK3288 - use tinker-rk3288 configuration
> -   - Vyasa RK3288 - use vyasa-rk3288 configuration
> -
> -Two RK3036 boards are supported:
> -
> -   - EVB RK3036 - use evb-rk3036 configuration
> -   - Kylin - use kylin_rk3036 configuration
> -
> -Two RK3308 boards are supported:
> -
> -   - EVB RK3308 - use evb-rk3308 configuration
> -   - ROC-CC-RK3308 - use roc-cc-rk3308 configuration
> -
> -Three RK3328 boards are supported:
> -
> -   - EVB RK3328 - use evb-rk3328_defconfig
> -   - Pine64 Rock64 board - use rock64-rk3328_defconfig
> -   - Firefly / Libre Computer Project ROC-RK3328-CC board -
> -     use roc-cc-rk3328_defconfig
> -
> -Size RK3399 boards are supported (aarch64):
> -
> -   - EBV RK3399 - use evb_rk3399 configuration
> -   - Firefly RK3399 - use the firefly_rk3399 configuration
> -   - Puma - use puma_rk3399 configuration
> -   - Ficus - use ficus-rk3399 configuration
> -   - Rock960 (Vamrs) - use rock960-rk3399 configuration
> -   - Bob - use chromebook_bob configuration
> -
> -Four RK3368 boards are supported:
> -
> -   - Sheep - use sheep-rk3368 configuration
> -   - Lion - use lion-rk3368 configuration
> -   - Geekbox - use geekbox configuration
> -   - EVB PX5 - use evb-px5  configuration
> -
> -One RK3128 board is supported:
> -
> -   - EVB RK3128 - use evb-rk3128 configuration
> -
> -One RK3229 board is supported:
> -
> -   - EVB RK3229 - use evb-rk3229 configuration
> -
> -Two RV1108 boards are supported:
> -
> -   - EVB RV1108 - use evb-rv1108 configuration
> -   - Elgin R1 - use elgin-rv1108 configuration
> -
> -One RV3188 baord is supported:
> -
> -   - Raxda Rock - use rock configuration
> -
> -
> -For example:
> -
>   1. To build RK3288 board:
>   
>      CROSS_COMPILE=arm-linux-gnueabi- make O=firefly firefly-rk3288_defconfig all