[PATCH 2/2] usb: ehci-mx6: Print error code on failure

[Marek Vasut]

Print the error code if the regulator enable fails, otherwise the error
message is rather useless and confusing.

Signed-off-by: Marek Vasut <marex at denx.de>
---
 drivers/usb/host/ehci-mx6.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 470eddd0c9..5f84c7b91d 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -448,7 +448,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 					   (type == USB_INIT_DEVICE) ?
 					   false : true);
 		if (ret && ret != -ENOSYS) {
-			puts("Error enabling VBUS supply\n");
+			printf("Error enabling VBUS supply (ret=%i)\n", ret);
 			return ret;
 		}
 	}
@@ -615,7 +615,7 @@ static int ehci_usb_probe(struct udevice *dev)
 					   (type == USB_INIT_DEVICE) ?
 					   false : true);
 		if (ret && ret != -ENOSYS) {
-			puts("Error enabling VBUS supply\n");
+			printf("Error enabling VBUS supply (ret=%i)\n", ret);
 			return ret;
 		}
 	}
-- 
2.25.1