[PATCH v2 1/1] cmd: gpt: add eMMC and GPT support

Michael Nazzareno Trimarchi michael at amarulasolutions.com
Fri May 8 08:28:53 CEST 2020


Hi

On Fri, May 8, 2020 at 8:05 AM Rayagonda Kokatanur
<rayagonda.kokatanur at broadcom.com> wrote:
>
> From: Corneliu Doban <cdoban at broadcom.com>
>
> Add eMMC and GPT support.
> - GPT partition list and command to create the GPT added to u-boot
>   environment
> - eMMC boot commands added to u-boot environment
> - new gpt commands (enumarate and setenv) that are used by broadcom
>   update scripts and boot commands
> - eMMC specific u-boot configurations with environment saved in eMMC
>   and GPT support
>
> Signed-off-by: Corneliu Doban <cdoban at broadcom.com>
> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
> ---
> Changes from v1:
>  -Address review comments from Simon Glass,
>   Correct function comments,
>   Check for return value,
>   Add helper function in part.h
>
>  cmd/gpt.c      | 144 +++++++++++++++++++++++++++++++++++++++++++++++++
>  include/part.h |  42 +++++++++++++++
>  2 files changed, 186 insertions(+)
>
> diff --git a/cmd/gpt.c b/cmd/gpt.c
> index b8d11c167d..3263ac42df 100644
> --- a/cmd/gpt.c
> +++ b/cmd/gpt.c
> @@ -15,6 +15,7 @@
>  #include <malloc.h>
>  #include <command.h>
>  #include <part_efi.h>
> +#include <part.h>
>  #include <exports.h>
>  #include <linux/ctype.h>
>  #include <div64.h>
> @@ -616,6 +617,135 @@ static int gpt_verify(struct blk_desc *blk_dev_desc, const char *str_part)
>         return ret;
>  }
>
> +/**
> + * gpt_enumerate() - Enumerate partition names into environment variable.
> + *
> + * Enumerate partition names. Partition names are stored in gpt_partition_list
> + * environment variable. Each partition name is delimited by space.
> + *
> + * @blk_dev_desc: block device descriptor
> + *
> + * @Return: '0' on success and 1 on failure
> + */
> +static int gpt_enumerate(struct blk_desc *blk_dev_desc)
> +{
> +       struct part_driver *first_drv, *part_drv;
> +       int str_len = 0, tmp_len;
> +       char part_list[2048];
> +       int n_drvs;
> +       char *ptr;
> +
> +       part_list[0] = 0;
> +       n_drvs = part_driver_get_count();
> +       first_drv = part_driver_get(0);
> +       if (!first_drv) {
> +               printf("Failed to get partition driver\n");
> +               return 1;
> +       }
> +
> +       for (part_drv = first_drv; part_drv != first_drv + n_drvs; part_drv++) {
> +               disk_partition_t pinfo;
> +               int ret;
> +               int i;
> +
> +               for (i = 1; i < part_drv->max_entries; i++) {
> +                       ret = part_drv->get_info(blk_dev_desc, i, &pinfo);
> +                       if (ret) {
> +                               /* no more entries in table */
> +                               break;
> +                       }
> +
> +                       ptr = &part_list[str_len];
> +                       tmp_len = strlen((const char *)pinfo.name);
> +                       str_len += tmp_len;
> +                       if (str_len > sizeof(part_list)) {
> +                               printf("Error insufficient memory\n");
> +                               return -ENOMEM;
> +                       }
> +                       strncpy(ptr, (const char *)pinfo.name, tmp_len);
> +                       /* One byte for space(" ") delimiter */
> +                       strncpy(&ptr[tmp_len], " ", 1);
> +                       str_len++;
> +               }
> +       }
> +       if (*part_list)
> +               part_list[strlen(part_list) - 1] = 0;
> +       debug("setenv gpt_partition_list %s\n", part_list);
> +
> +       return env_set("gpt_partition_list", part_list);
> +}
> +
> +/**
> + * gpt_setenv() - Dynamically setup environment variables.
> + *
> + * Dynamically setup environment variables for name, index, offset and size
> + * for partition in GPT table after running "gpt setenv" for a partition name.
> + * gpt_partition_name, gpt_partition_entry, gpt_partition_addr and
> + * gpt_partition_size environment variables will be set.
> + *
> + * @blk_dev_desc: block device descriptor
> + * @name: partition name
> + *
> + * @Return: '0' on success and -ENOENT on failure
> + */
> +static int gpt_setenv(struct blk_desc *blk_dev_desc, const char *name)
> +{
> +       struct part_driver *first_drv, *part_drv;
> +       int n_drvs;
> +
> +       n_drvs = part_driver_get_count();
> +       first_drv = part_driver_get(0);
> +       if (!first_drv) {
> +               printf("Failed to get partition driver\n");
> +               return -ENOENT;
> +       }
> +
> +       for (part_drv = first_drv; part_drv != first_drv + n_drvs; part_drv++) {
> +               disk_partition_t pinfo;
> +               char buf[32];
> +               int ret;
> +               int i;
> +
> +               for (i = 1; i < part_drv->max_entries; i++) {
> +                       ret = part_drv->get_info(blk_dev_desc, i, &pinfo);
> +                       if (ret) {
> +                               /* no more entries in table */
> +                               break;
> +                       }

Can you please move the part below in a separated function?

> +                       if (strcmp(name, (const char *)pinfo.name) == 0) {
> +                               /* match found, setup environment variables */
> +                               sprintf(buf, LBAF, pinfo.start);
> +                               debug("setenv gpt_partition_addr %s\n", buf);
> +                               ret = env_set("gpt_partition_addr", buf);
> +                               if (ret)
> +                                       return -ENOENT;
> +

It will be nice to have one function to set a series of environment
set in one run if this
must be atomic.

> +                               sprintf(buf, LBAF, pinfo.size);
> +                               debug("setenv gpt_partition_size %s\n", buf);
> +                               ret = env_set("gpt_partition_size", buf);
> +                               if (ret)
> +                                       return -ENOENT;
> +
> +                               sprintf(buf, "%d", i);
> +                               debug("setenv gpt_partition_entry %s\n", buf);
> +                               ret = env_set("gpt_partition_entry", buf);
> +                               if (ret)
> +                                       return -ENOENT;
> +
> +                               sprintf(buf, "%s", pinfo.name);
> +                               debug("setenv gpt_partition_name %s\n", buf);
> +                               ret = env_set("gpt_partition_name", buf);
> +                               if (ret)
> +                                       return -ENOENT;
> +
> +                               return 0;
> +                       }
> +               }
> +       }
> +

You always return ENOENT so you can jump here

> +       return -ENOENT;
> +}
> +
>  static int do_disk_guid(struct blk_desc *dev_desc, char * const namestr)
>  {
>         int ret;
> @@ -822,6 +952,10 @@ static int do_gpt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>         } else if ((strcmp(argv[1], "verify") == 0)) {
>                 ret = gpt_verify(blk_dev_desc, argv[4]);
>                 printf("Verify GPT: ");
> +       } else if ((strcmp(argv[1], "setenv") == 0)) {
> +               ret = gpt_setenv(blk_dev_desc, argv[4]);
> +       } else if ((strcmp(argv[1], "enumerate") == 0)) {
> +               ret = gpt_enumerate(blk_dev_desc);
>         } else if (strcmp(argv[1], "guid") == 0) {
>                 ret = do_disk_guid(blk_dev_desc, argv[4]);
>  #ifdef CONFIG_CMD_GPT_RENAME
> @@ -852,7 +986,17 @@ U_BOOT_CMD(gpt, CONFIG_SYS_MAXARGS, 1, do_gpt,
>         " to interface\n"
>         " Example usage:\n"
>         " gpt write mmc 0 $partitions\n"
> +       "    - write the GPT to device\n"
>         " gpt verify mmc 0 $partitions\n"
> +       "    - verify the GPT on device against $partitions\n"
> +       " gpt setenv mmc 0 $name\n"
> +       "    - setup environment variables for partition $name:\n"
> +       "      gpt_partition_addr, gpt_partition_size,\n"
> +       "      gpt_partition_name, gpt_partition_entry\n"
> +       " gpt enumerate mmc 0\n"
> +       "    - store list of partitions to gpt_partition_list environment variable\n"
> +       " read <interface> <dev>\n"
> +       "    - read GPT into a data structure for manipulation\n"
>         " gpt guid <interface> <dev>\n"
>         "    - print disk GUID\n"
>         " gpt guid <interface> <dev> <varname>\n"
> diff --git a/include/part.h b/include/part.h
> index 3693527397..014f4164e7 100644
> --- a/include/part.h
> +++ b/include/part.h
> @@ -9,6 +9,7 @@
>  #include <blk.h>
>  #include <ide.h>
>  #include <uuid.h>
> +#include <linker_lists.h>
>  #include <linux/list.h>
>
>  struct block_drvr {
> @@ -474,5 +475,46 @@ int write_mbr_partition(struct blk_desc *dev_desc, void *buf);
>
>  #endif
>
> +#ifdef CONFIG_PARTITIONS
> +/**
> + * part_driver_get_count() - get partition driver count
> + *
> + * @return - number of partition drivers
> + */
> +static inline int part_driver_get_count(void)
> +{
> +       return ll_entry_count(struct part_driver, part_driver);
> +}
> +
> +/**
> + * part_driver_get() - get partition driver
> + *
> + * Get the partition driver from the partition driver list for the
> + * requested partition driver count
> + *
> + * @param n - partition driver count
> + *
> + * @return - pointer to partition driver on success, otherwise NULL
> + */
> +static inline struct part_driver *part_driver_get(int n)
> +{
> +       struct part_driver *first_drv;
> +
> +       if (n > part_driver_get_count()) {
> +               printf("Invalid partition driver count (%d)\n", n);
> +               return NULL;
> +       }
> +
> +       first_drv = ll_entry_start(struct part_driver, part_driver);
> +
> +       return &first_drv[n];
> +}
> +#else
> +static inline int part_driver_get_count(void)
> +{ return 0; }
> +
> +static inline struct part_driver *part_driver_get(int n)
> +{ return NULL; }
> +#endif /* CONFIG_PARTITIONS */
>
>  #endif /* _PART_H */
> --
> 2.17.1
>


More information about the U-Boot mailing list