[PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value

[Anatolij Gustschin]

Hi Peng,

On Sun, 17 May 2020 10:04:58 +0000
Peng Fan peng.fan at nxp.com wrote:

> Hi Anatolij,
> 
> > Subject: [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property
> > value
> > 
> > Fix boot hang with endless loop outputting:
> > CPU Temperature (47200C) has beyond alert (0C), close to critical (0C)
> > waiting...  
> 
> Could you share more info which part was broken?

I've tested i.MX8QXP based capricorn/giedi board (giedi_defconfig, imx8-giedi.dts)
and it was not booting:

U-Boot SPL 2020.07-rc2-00124-g515f613253 (May 16 2020 - 09:22:49 +0200)
Trying to boot from MMC1
Load image from MMC/SD 0x3ec00


U-Boot 2020.07-rc2-00124-g515f613253 (May 16 2020 - 09:22:49 +0200) ##v01.07

sc_pm_get_clock_rate: resource:0 clk:2: res:3
Could not read CPU frequency: -22
CPU Temperature (34800C) has beyond alert (0C), close to critical (0C) waiting...
CPU Temperature (35000C) has beyond alert (0C), close to critical (0C) waiting...
CPU Temperature (35000C) has beyond alert (0C), close to critical (0C) waiting...
CPU Temperature (34800C) has beyond alert (0C), close to critical (0C) waiting...
CPU Temperature (34600C) has beyond alert (0C), close to critical (0C) waiting...
CPU Temperature (35000C) has beyond alert (0C), close to critical (0C) waiting...
...

Other i.MX8QXP based boards might be broken as well.

--
Anatolij