[PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value

[Fabio Estevam]

Hi Anatolij and Heiko,

On Sun, May 17, 2020 at 8:19 AM Anatolij Gustschin <agust at denx.de> wrote:

> I've tested i.MX8QXP based capricorn/giedi board (giedi_defconfig, imx8-giedi.dts)
> and it was not booting:
>
> U-Boot SPL 2020.07-rc2-00124-g515f613253 (May 16 2020 - 09:22:49 +0200)
> Trying to boot from MMC1
> Load image from MMC/SD 0x3ec00
>
>
> U-Boot 2020.07-rc2-00124-g515f613253 (May 16 2020 - 09:22:49 +0200) ##v01.07
>
> sc_pm_get_clock_rate: resource:0 clk:2: res:3
> Could not read CPU frequency: -22
> CPU Temperature (34800C) has beyond alert (0C), close to critical (0C) waiting...
> CPU Temperature (35000C) has beyond alert (0C), close to critical (0C) waiting...
> CPU Temperature (35000C) has beyond alert (0C), close to critical (0C) waiting...
> CPU Temperature (34800C) has beyond alert (0C), close to critical (0C) waiting...
> CPU Temperature (34600C) has beyond alert (0C), close to critical (0C) waiting...
> CPU Temperature (35000C) has beyond alert (0C), close to critical (0C) waiting...
> ...
>
> Other i.MX8QXP based boards might be broken as well.

Would it be possible to add this i.MX8QXP capricorn/giedi board into
Heiko's boot farm?

Thanks