[PATCH v10 07/21] clk: Add K210 clock support
Sean Anderson
seanga2 at gmail.com
Sun May 3 04:46:23 CEST 2020
Due to the large number of clocks, I decided to use the CCF. The overall
structure is modeled after the imx code. Clocks parameters are stored in
several arrays, and are then instantiated at run-time. There are some
translation macros (FOOIFY()) which allow for more dense packing.
Signed-off-by: Sean Anderson <seanga2 at gmail.com>
CC: Lukasz Majewski <lukma at denx.de>
---
Changes in v8:
- Rework code to not need a new CCF api
- Add some documentation
Changes in v7:
- Add numbering to some sysctl registers
Changes in v6:
- Reformat code so checkpatch generates fewer warnings
- Give "fictional" clocks their own ids
- Rename sysctl CLK_FREQ register to UART_BAUD to better reflect its
semantics
Changes in v5:
- Don't unmap priv->reg
- Remove comment on APB clocks since it has been clarified by Kendryte
- Add i2s mclks
- Reorder clock ids to be continuous
- Rewrite to statically allocate all clocks. This has helped find several
bugs (since it is easy to see when a clock has the wrong register).
- Fix ACLK sometimes having the wrong parent
- Fix SPI3 having the wrong divider
- Prevent being probed multiple times on failure
Changes in v4:
- Reparent aclk before configuring pll0
- Update copyright
- Lint
Changes in v3:
- Removed sysctl struct, replacing it with defines. This is to have the
same interface to sysctl from C as from the device tree.
- Fixed clocks having the same id
- Fixed clocks not using the correct register/bits
- Aligned the defines in headers
Changes in v2:
- Add clk.o to obj-y
- Don't probe before relocation
MAINTAINERS | 7 +
.../mfd/kendryte,k210-sysctl.txt | 33 +
drivers/clk/kendryte/Kconfig | 2 +-
drivers/clk/kendryte/Makefile | 2 +-
drivers/clk/kendryte/clk.c | 663 ++++++++++++++++++
include/dt-bindings/clock/k210-sysctl.h | 59 ++
include/dt-bindings/mfd/k210-sysctl.h | 38 +
include/kendryte/clk.h | 35 +
8 files changed, 837 insertions(+), 2 deletions(-)
create mode 100644 doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
create mode 100644 drivers/clk/kendryte/clk.c
create mode 100644 include/dt-bindings/clock/k210-sysctl.h
create mode 100644 include/dt-bindings/mfd/k210-sysctl.h
create mode 100644 include/kendryte/clk.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 7ac7e21ba1..88443bf82d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -830,6 +830,13 @@ F: arch/riscv/
F: cmd/riscv/
F: tools/prelink-riscv.c
+RISC-V KENDRYTE
+M: Sean Anderson <seanga2 at gmail.com>
+S: Maintained
+F: doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
+F: drivers/clk/kendryte/
+F: include/kendryte/
+
RNG
M: Sughosh Ganu <sughosh.ganu at linaro.org>
R: Heinrich Schuchardt <xypron.glpk at gmx.de>
diff --git a/doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt b/doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
new file mode 100644
index 0000000000..5b24abcb62
--- /dev/null
+++ b/doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
@@ -0,0 +1,33 @@
+Kendryte K210 Sysctl
+
+This binding describes the K210 sysctl device, which contains many miscellaneous
+registers controlling system functionality. This node is a register map and can
+be reference by other bindings which need a phandle to the K210 sysctl regmap.
+
+Required properties:
+- compatible: should be
+ "kendryte,k210-sysctl", "syscon", "simple-mfd"
+- reg: address and length of the sysctl registers
+- reg-io-width: must be <4>
+
+Clock sub-node
+
+This node is a binding for the clock tree driver
+
+Required properties:
+- compatible: should be "kendryte,k210-clk"
+- clocks: phandle to the "in0" external oscillator
+- #clock-cells: must be <1>
+
+Example:
+sysctl: syscon at 50440000 {
+ compatible = "kendryte,k210-sysctl", "syscon", "simple-mfd";
+ reg = <0x50440000 0x100>;
+ reg-io-width = <4>;
+
+ sysclk: clock-controller {
+ compatible = "kendryte,k210-clk";
+ clocks = <&in0>;
+ #clock-cells = <1>;
+ };
+};
diff --git a/drivers/clk/kendryte/Kconfig b/drivers/clk/kendryte/Kconfig
index 7b69c8afaf..073fca0781 100644
--- a/drivers/clk/kendryte/Kconfig
+++ b/drivers/clk/kendryte/Kconfig
@@ -1,6 +1,6 @@
config CLK_K210
bool "Clock support for Kendryte K210"
- depends on CLK && CLK_CCF
+ depends on CLK && CLK_CCF && CLK_COMPOSITE_CCF
help
This enables support clock driver for Kendryte K210 platforms.
diff --git a/drivers/clk/kendryte/Makefile b/drivers/clk/kendryte/Makefile
index 47f682fce3..6fb68253ae 100644
--- a/drivers/clk/kendryte/Makefile
+++ b/drivers/clk/kendryte/Makefile
@@ -1 +1 @@
-obj-y += bypass.o pll.o
+obj-y += bypass.o clk.o pll.o
diff --git a/drivers/clk/kendryte/clk.c b/drivers/clk/kendryte/clk.c
new file mode 100644
index 0000000000..981b3b7699
--- /dev/null
+++ b/drivers/clk/kendryte/clk.c
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
+ */
+#include <kendryte/clk.h>
+
+#include <asm/io.h>
+#include <dt-bindings/clock/k210-sysctl.h>
+#include <dt-bindings/mfd/k210-sysctl.h>
+#include <dm.h>
+#include <log.h>
+#include <mapmem.h>
+
+#include <kendryte/bypass.h>
+#include <kendryte/pll.h>
+
+/* All methods are delegated to CCF clocks */
+
+static ulong k210_clk_get_rate(struct clk *clk)
+{
+ struct clk *c;
+ int err = clk_get_by_id(clk->id, &c);
+
+ if (err)
+ return err;
+ return clk_get_rate(c);
+}
+
+static ulong k210_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *c;
+ int err = clk_get_by_id(clk->id, &c);
+
+ if (err)
+ return err;
+ return clk_set_rate(c, rate);
+}
+
+static int k210_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct clk *c, *p;
+ int err = clk_get_by_id(clk->id, &c);
+
+ if (err)
+ return err;
+
+ err = clk_get_by_id(parent->id, &p);
+ if (err)
+ return err;
+
+ return clk_set_parent(c, p);
+}
+
+static int k210_clk_endisable(struct clk *clk, bool enable)
+{
+ struct clk *c;
+ int err = clk_get_by_id(clk->id, &c);
+
+ if (err)
+ return err;
+ return enable ? clk_enable(c) : clk_disable(c);
+}
+
+static int k210_clk_enable(struct clk *clk)
+{
+ return k210_clk_endisable(clk, true);
+}
+
+static int k210_clk_disable(struct clk *clk)
+{
+ return k210_clk_endisable(clk, false);
+}
+
+static const struct clk_ops k210_clk_ops = {
+ .set_rate = k210_clk_set_rate,
+ .get_rate = k210_clk_get_rate,
+ .set_parent = k210_clk_set_parent,
+ .enable = k210_clk_enable,
+ .disable = k210_clk_disable,
+};
+
+/* Parents for muxed clocks */
+static const char * const generic_sels[] = { "in0_half", "pll0_half" };
+/* The first clock is in0, which is filled in by k210_clk_probe */
+static const char *aclk_sels[] = { NULL, "pll0_half" };
+static const char *pll2_sels[] = { NULL, "pll0", "pll1" };
+
+/*
+ * All parameters for different sub-clocks are collected into parameter arrays.
+ * These parameters are then initialized by the clock which uses them during
+ * probe. To save space, ids are automatically generated for each sub-clock by
+ * using an enum. Instead of storing a parameter struct for each clock, even for
+ * those clocks which don't use a particular type of sub-clock, we can just
+ * store the parameters for the clocks which need them.
+ *
+ * So why do it like this? Arranging all the sub-clocks together makes it very
+ * easy to find bugs in the code.
+ */
+
+#define DIV(id, off, shift, width) DIV_FLAGS(id, off, shift, width, 0)
+#define DIV_LIST \
+ DIV_FLAGS(K210_CLK_ACLK, K210_SYSCTL_SEL0, 1, 2, \
+ CLK_DIVIDER_POWER_OF_TWO) \
+ DIV(K210_CLK_APB0, K210_SYSCTL_SEL0, 3, 3) \
+ DIV(K210_CLK_APB1, K210_SYSCTL_SEL0, 6, 3) \
+ DIV(K210_CLK_APB2, K210_SYSCTL_SEL0, 9, 3) \
+ DIV(K210_CLK_SRAM0, K210_SYSCTL_THR0, 0, 4) \
+ DIV(K210_CLK_SRAM1, K210_SYSCTL_THR0, 4, 4) \
+ DIV(K210_CLK_AI, K210_SYSCTL_THR0, 8, 4) \
+ DIV(K210_CLK_DVP, K210_SYSCTL_THR0, 12, 4) \
+ DIV(K210_CLK_ROM, K210_SYSCTL_THR0, 16, 4) \
+ DIV(K210_CLK_SPI0, K210_SYSCTL_THR1, 0, 8) \
+ DIV(K210_CLK_SPI1, K210_SYSCTL_THR1, 8, 8) \
+ DIV(K210_CLK_SPI2, K210_SYSCTL_THR1, 16, 8) \
+ DIV(K210_CLK_SPI3, K210_SYSCTL_THR1, 24, 8) \
+ DIV(K210_CLK_TIMER0, K210_SYSCTL_THR2, 0, 8) \
+ DIV(K210_CLK_TIMER1, K210_SYSCTL_THR2, 8, 8) \
+ DIV(K210_CLK_TIMER2, K210_SYSCTL_THR2, 16, 8) \
+ DIV(K210_CLK_I2S0, K210_SYSCTL_THR3, 0, 16) \
+ DIV(K210_CLK_I2S1, K210_SYSCTL_THR3, 16, 16) \
+ DIV(K210_CLK_I2S2, K210_SYSCTL_THR4, 0, 16) \
+ DIV(K210_CLK_I2S0_M, K210_SYSCTL_THR4, 16, 8) \
+ DIV(K210_CLK_I2S1_M, K210_SYSCTL_THR4, 24, 8) \
+ DIV(K210_CLK_I2S2_M, K210_SYSCTL_THR4, 0, 8) \
+ DIV(K210_CLK_I2C0, K210_SYSCTL_THR5, 8, 8) \
+ DIV(K210_CLK_I2C1, K210_SYSCTL_THR5, 16, 8) \
+ DIV(K210_CLK_I2C2, K210_SYSCTL_THR5, 24, 8) \
+ DIV(K210_CLK_WDT0, K210_SYSCTL_THR6, 0, 8) \
+ DIV(K210_CLK_WDT1, K210_SYSCTL_THR6, 8, 8)
+
+#define _DIVIFY(id) K210_CLK_DIV_##id
+#define DIVIFY(id) _DIVIFY(id)
+
+enum k210_div_ids {
+#define DIV_FLAGS(id, ...) DIVIFY(id),
+ DIV_LIST
+#undef DIV_FLAGS
+};
+
+struct k210_div_params {
+ u8 off;
+ u8 shift;
+ u8 width;
+ u8 flags;
+};
+
+static const struct k210_div_params k210_divs[] = {
+#define DIV_FLAGS(id, _off, _shift, _width, _flags) \
+ [DIVIFY(id)] = { \
+ .off = (_off), \
+ .shift = (_shift), \
+ .width = (_width), \
+ .flags = (_flags), \
+ },
+ DIV_LIST
+#undef DIV_FLAGS
+};
+
+#undef DIV
+#undef DIV_LIST
+
+#define GATE_LIST \
+ GATE(K210_CLK_CPU, K210_SYSCTL_EN_CENT, 0) \
+ GATE(K210_CLK_SRAM0, K210_SYSCTL_EN_CENT, 1) \
+ GATE(K210_CLK_SRAM1, K210_SYSCTL_EN_CENT, 2) \
+ GATE(K210_CLK_APB0, K210_SYSCTL_EN_CENT, 3) \
+ GATE(K210_CLK_APB1, K210_SYSCTL_EN_CENT, 4) \
+ GATE(K210_CLK_APB2, K210_SYSCTL_EN_CENT, 5) \
+ GATE(K210_CLK_ROM, K210_SYSCTL_EN_PERI, 0) \
+ GATE(K210_CLK_DMA, K210_SYSCTL_EN_PERI, 1) \
+ GATE(K210_CLK_AI, K210_SYSCTL_EN_PERI, 2) \
+ GATE(K210_CLK_DVP, K210_SYSCTL_EN_PERI, 3) \
+ GATE(K210_CLK_FFT, K210_SYSCTL_EN_PERI, 4) \
+ GATE(K210_CLK_GPIO, K210_SYSCTL_EN_PERI, 5) \
+ GATE(K210_CLK_SPI0, K210_SYSCTL_EN_PERI, 6) \
+ GATE(K210_CLK_SPI1, K210_SYSCTL_EN_PERI, 7) \
+ GATE(K210_CLK_SPI2, K210_SYSCTL_EN_PERI, 8) \
+ GATE(K210_CLK_SPI3, K210_SYSCTL_EN_PERI, 9) \
+ GATE(K210_CLK_I2S0, K210_SYSCTL_EN_PERI, 10) \
+ GATE(K210_CLK_I2S1, K210_SYSCTL_EN_PERI, 11) \
+ GATE(K210_CLK_I2S2, K210_SYSCTL_EN_PERI, 12) \
+ GATE(K210_CLK_I2C0, K210_SYSCTL_EN_PERI, 13) \
+ GATE(K210_CLK_I2C1, K210_SYSCTL_EN_PERI, 14) \
+ GATE(K210_CLK_I2C2, K210_SYSCTL_EN_PERI, 15) \
+ GATE(K210_CLK_UART1, K210_SYSCTL_EN_PERI, 16) \
+ GATE(K210_CLK_UART2, K210_SYSCTL_EN_PERI, 17) \
+ GATE(K210_CLK_UART3, K210_SYSCTL_EN_PERI, 18) \
+ GATE(K210_CLK_AES, K210_SYSCTL_EN_PERI, 19) \
+ GATE(K210_CLK_FPIOA, K210_SYSCTL_EN_PERI, 20) \
+ GATE(K210_CLK_TIMER0, K210_SYSCTL_EN_PERI, 21) \
+ GATE(K210_CLK_TIMER1, K210_SYSCTL_EN_PERI, 22) \
+ GATE(K210_CLK_TIMER2, K210_SYSCTL_EN_PERI, 23) \
+ GATE(K210_CLK_WDT0, K210_SYSCTL_EN_PERI, 24) \
+ GATE(K210_CLK_WDT1, K210_SYSCTL_EN_PERI, 25) \
+ GATE(K210_CLK_SHA, K210_SYSCTL_EN_PERI, 26) \
+ GATE(K210_CLK_OTP, K210_SYSCTL_EN_PERI, 27) \
+ GATE(K210_CLK_RTC, K210_SYSCTL_EN_PERI, 29)
+
+#define _GATEIFY(id) K210_CLK_GATE_##id
+#define GATEIFY(id) _GATEIFY(id)
+
+enum k210_gate_ids {
+#define GATE(id, ...) GATEIFY(id),
+ GATE_LIST
+#undef GATE
+};
+
+struct k210_gate_params {
+ u8 off;
+ u8 bit_idx;
+};
+
+static const struct k210_gate_params k210_gates[] = {
+#define GATE(id, _off, _idx) \
+ [GATEIFY(id)] = { \
+ .off = (_off), \
+ .bit_idx = (_idx), \
+ },
+ GATE_LIST
+#undef GATE
+};
+
+#undef GATE_LIST
+
+#define MUX(id, reg, shift, width) \
+ MUX_PARENTS(id, generic_sels, reg, shift, width)
+#define MUX_LIST \
+ MUX_PARENTS(K210_CLK_PLL2, pll2_sels, K210_SYSCTL_PLL2, 26, 2) \
+ MUX_PARENTS(K210_CLK_ACLK, aclk_sels, K210_SYSCTL_SEL0, 0, 1) \
+ MUX(K210_CLK_SPI3, K210_SYSCTL_SEL0, 12, 1) \
+ MUX(K210_CLK_TIMER0, K210_SYSCTL_SEL0, 13, 1) \
+ MUX(K210_CLK_TIMER1, K210_SYSCTL_SEL0, 14, 1) \
+ MUX(K210_CLK_TIMER2, K210_SYSCTL_SEL0, 15, 1)
+
+#define _MUXIFY(id) K210_CLK_MUX_##id
+#define MUXIFY(id) _MUXIFY(id)
+
+enum k210_mux_ids {
+#define MUX_PARENTS(id, ...) MUXIFY(id),
+ MUX_LIST
+#undef MUX_PARENTS
+ K210_CLK_MUX_NONE,
+};
+
+struct k210_mux_params {
+ const char *const *parent_names;
+ u8 num_parents;
+ u8 off;
+ u8 shift;
+ u8 width;
+};
+
+static const struct k210_mux_params k210_muxes[] = {
+#define MUX_PARENTS(id, parents, _off, _shift, _width) \
+ [MUXIFY(id)] = { \
+ .parent_names = (const char * const *)(parents), \
+ .num_parents = ARRAY_SIZE(parents), \
+ .off = (_off), \
+ .shift = (_shift), \
+ .width = (_width), \
+ },
+ MUX_LIST
+#undef MUX_PARENTS
+};
+
+#undef MUX
+#undef MUX_LIST
+
+struct k210_pll_params {
+ u8 off;
+ u8 lock_off;
+ u8 shift;
+ u8 width;
+};
+
+static const struct k210_pll_params k210_plls[] = {
+#define PLL(_off, _shift, _width) { \
+ .off = (_off), \
+ .lock_off = K210_SYSCTL_PLL_LOCK, \
+ .shift = (_shift), \
+ .width = (_width), \
+}
+ [0] = PLL(K210_SYSCTL_PLL0, 0, 2),
+ [1] = PLL(K210_SYSCTL_PLL1, 8, 1),
+ [2] = PLL(K210_SYSCTL_PLL2, 16, 1),
+#undef PLL
+};
+
+#define COMP(id) \
+ COMP_FULL(id, MUXIFY(id), DIVIFY(id), GATEIFY(id))
+#define COMP_NOMUX(id) \
+ COMP_FULL(id, K210_CLK_MUX_NONE, DIVIFY(id), GATEIFY(id))
+#define COMP_LIST \
+ COMP(K210_CLK_SPI3) \
+ COMP(K210_CLK_TIMER0) \
+ COMP(K210_CLK_TIMER1) \
+ COMP(K210_CLK_TIMER2) \
+ COMP_NOMUX(K210_CLK_SRAM0) \
+ COMP_NOMUX(K210_CLK_SRAM1) \
+ COMP_NOMUX(K210_CLK_ROM) \
+ COMP_NOMUX(K210_CLK_DVP) \
+ COMP_NOMUX(K210_CLK_APB0) \
+ COMP_NOMUX(K210_CLK_APB1) \
+ COMP_NOMUX(K210_CLK_APB2) \
+ COMP_NOMUX(K210_CLK_AI) \
+ COMP_NOMUX(K210_CLK_I2S0) \
+ COMP_NOMUX(K210_CLK_I2S1) \
+ COMP_NOMUX(K210_CLK_I2S2) \
+ COMP_NOMUX(K210_CLK_WDT0) \
+ COMP_NOMUX(K210_CLK_WDT1) \
+ COMP_NOMUX(K210_CLK_SPI0) \
+ COMP_NOMUX(K210_CLK_SPI1) \
+ COMP_NOMUX(K210_CLK_SPI2) \
+ COMP_NOMUX(K210_CLK_I2C0) \
+ COMP_NOMUX(K210_CLK_I2C1) \
+ COMP_NOMUX(K210_CLK_I2C2)
+
+#define _COMPIFY(id) K210_CLK_COMP_##id
+#define COMPIFY(id) _COMPIFY(id)
+
+enum k210_comp_ids {
+#define COMP_FULL(id, ...) COMPIFY(id),
+ COMP_LIST
+#undef COMP_FULL
+};
+
+struct k210_comp_params {
+ u8 mux;
+ u8 div;
+ u8 gate;
+};
+
+static const struct k210_comp_params k210_comps[] = {
+#define COMP_FULL(id, _mux, _div, _gate) \
+ [COMPIFY(id)] = { \
+ .mux = (_mux), \
+ .div = (_div), \
+ .gate = (_gate), \
+ },
+ COMP_LIST
+#undef COMP_FULL
+};
+
+#undef COMP
+#undef COMP_ID
+#undef COMP_NOMUX
+#undef COMP_NOMUX_ID
+#undef COMP_LIST
+
+static struct clk *k210_bypass_children = {
+ NULL,
+};
+
+/* Helper functions to create sub-clocks */
+static struct clk_mux *k210_create_mux(const struct k210_mux_params *params,
+ void *base)
+{
+ struct clk_mux *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+
+ if (!mux)
+ return mux;
+
+ mux->reg = base + params->off;
+ mux->mask = BIT(params->width) - 1;
+ mux->shift = params->shift;
+ mux->parent_names = params->parent_names;
+ mux->num_parents = params->num_parents;
+
+ return mux;
+}
+
+static struct clk_divider *k210_create_div(const struct k210_div_params *params,
+ void *base)
+{
+ struct clk_divider *div = kzalloc(sizeof(*div), GFP_KERNEL);
+
+ if (!div)
+ return div;
+
+ div->reg = base + params->off;
+ div->shift = params->shift;
+ div->width = params->width;
+ div->flags = params->flags;
+
+ return div;
+}
+
+static struct clk_gate *k210_create_gate(const struct k210_gate_params *params,
+ void *base)
+{
+ struct clk_gate *gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+
+ if (!gate)
+ return gate;
+
+ gate->reg = base + params->off;
+ gate->bit_idx = params->bit_idx;
+
+ return gate;
+}
+
+static struct k210_pll *k210_create_pll(const struct k210_pll_params *params,
+ void *base)
+{
+ struct k210_pll *pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+
+ if (!pll)
+ return pll;
+
+ pll->reg = base + params->off;
+ pll->lock = base + params->lock_off;
+ pll->shift = params->shift;
+ pll->width = params->width;
+
+ return pll;
+}
+
+/* Create all sub-clocks, and then register the composite clock */
+static struct clk *k210_register_comp(const struct k210_comp_params *params,
+ void *base, const char *name,
+ const char *parent)
+{
+ const char *const *parent_names;
+ int num_parents;
+ struct clk *comp;
+ const struct clk_ops *mux_ops;
+ struct clk_mux *mux;
+ struct clk_divider *div;
+ struct clk_gate *gate;
+
+ if (params->mux == K210_CLK_MUX_NONE) {
+ if (!parent)
+ return ERR_PTR(-EINVAL);
+
+ mux_ops = NULL;
+ mux = NULL;
+ parent_names = &parent;
+ num_parents = 1;
+ } else {
+ mux_ops = &clk_mux_ops;
+ mux = k210_create_mux(&k210_muxes[params->mux], base);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ parent_names = mux->parent_names;
+ num_parents = mux->num_parents;
+ }
+
+ div = k210_create_div(&k210_divs[params->div], base);
+ if (!div) {
+ comp = ERR_PTR(-ENOMEM);
+ goto cleanup_mux;
+ }
+
+ gate = k210_create_gate(&k210_gates[params->gate], base);
+ if (!gate) {
+ comp = ERR_PTR(-ENOMEM);
+ goto cleanup_div;
+ }
+
+ comp = clk_register_composite(NULL, name, parent_names, num_parents,
+ &mux->clk, mux_ops,
+ &div->clk, &clk_divider_ops,
+ &gate->clk, &clk_gate_ops, 0);
+ if (IS_ERR(comp))
+ goto cleanup_gate;
+ return comp;
+
+cleanup_gate:
+ free(gate);
+cleanup_div:
+ free(div);
+cleanup_mux:
+ if (mux)
+ free(mux);
+ return comp;
+}
+
+static bool probed;
+
+static int k210_clk_probe(struct udevice *dev)
+{
+ int ret;
+ const char *in0;
+ struct clk *in0_clk, *bypass;
+ struct clk_mux *mux;
+ struct clk_divider *div;
+ struct k210_pll *pll;
+ void *base;
+
+ /*
+ * Only one instance of this driver allowed. This prevents weird bugs
+ * when the driver fails part-way through probing. Some clocks will
+ * already have been registered, and re-probing will register them
+ * again, creating a bunch of duplicates. Better error-handling/cleanup
+ * could fix this, but it's Probably Not Worth It (TM).
+ */
+ if (probed)
+ return -ENOTSUPP;
+
+ base = dev_read_addr_ptr(dev_get_parent(dev));
+ if (!base)
+ return -EINVAL;
+
+ in0_clk = kzalloc(sizeof(*in0_clk), GFP_KERNEL);
+ if (!in0_clk)
+ return -ENOMEM;
+
+ ret = clk_get_by_index(dev, 0, in0_clk);
+ if (ret)
+ return ret;
+ in0 = in0_clk->dev->name;
+
+ probed = true;
+
+ aclk_sels[0] = in0;
+ pll2_sels[0] = in0;
+
+ /*
+ * All PLLs have a broken bypass, but pll0 has the CPU downstream, so we
+ * need to manually reparent it whenever we configure pll0
+ */
+ pll = k210_create_pll(&k210_plls[0], base);
+ if (pll) {
+ bypass = k210_register_bypass("pll0", in0, &pll->clk,
+ &k210_pll_ops, in0_clk);
+ clk_dm(K210_CLK_PLL0, bypass);
+ } else {
+ return -ENOMEM;
+ }
+
+ {
+ const struct k210_pll_params *params = &k210_plls[1];
+
+ clk_dm(K210_CLK_PLL1,
+ k210_register_pll("pll1", in0, base + params->off,
+ base + params->lock_off, params->shift,
+ params->width));
+ }
+
+ /* PLL2 is muxed, so set up a composite clock */
+ mux = k210_create_mux(&k210_muxes[MUXIFY(K210_CLK_PLL2)], base);
+ pll = k210_create_pll(&k210_plls[2], base);
+ if (!mux || !pll) {
+ free(mux);
+ free(pll);
+ } else {
+ clk_dm(K210_CLK_PLL2,
+ clk_register_composite(NULL, "pll2", pll2_sels,
+ ARRAY_SIZE(pll2_sels),
+ &mux->clk, &clk_mux_ops,
+ &pll->clk, &k210_pll_ops,
+ &pll->clk, &k210_pll_ops, 0));
+ }
+
+ /* Half-frequency clocks for "even" dividers */
+ clk_dm(K210_CLK_IN0_H, k210_clk_half("in0_half", in0));
+ clk_dm(K210_CLK_PLL0_H, k210_clk_half("pll0_half", "pll0"));
+ clk_dm(K210_CLK_PLL2_H, k210_clk_half("pll2_half", "pll2"));
+
+ /* ACLK has no gate */
+ mux = k210_create_mux(&k210_muxes[MUXIFY(K210_CLK_ACLK)], base);
+ div = k210_create_div(&k210_divs[DIVIFY(K210_CLK_ACLK)], base);
+ if (!mux || !div) {
+ free(mux);
+ free(div);
+ } else {
+ struct clk *aclk =
+ clk_register_composite(NULL, "aclk", aclk_sels,
+ ARRAY_SIZE(aclk_sels),
+ &mux->clk, &clk_mux_ops,
+ &div->clk, &clk_divider_ops,
+ NULL, NULL, 0);
+ clk_dm(K210_CLK_ACLK, aclk);
+ if (!IS_ERR(aclk)) {
+ k210_bypass_children = aclk;
+ k210_bypass_set_children(bypass,
+ &k210_bypass_children, 1);
+ }
+ }
+
+#define REGISTER_COMP(id, name) \
+ clk_dm(id, \
+ k210_register_comp(&k210_comps[COMPIFY(id)], base, name, NULL))
+ REGISTER_COMP(K210_CLK_SPI3, "spi3");
+ REGISTER_COMP(K210_CLK_TIMER0, "timer0");
+ REGISTER_COMP(K210_CLK_TIMER1, "timer1");
+ REGISTER_COMP(K210_CLK_TIMER2, "timer2");
+#undef REGISTER_COMP
+
+ /* Dividing clocks, no mux */
+#define REGISTER_COMP_NOMUX(id, name, parent) \
+ clk_dm(id, \
+ k210_register_comp(&k210_comps[COMPIFY(id)], base, name, parent))
+ REGISTER_COMP_NOMUX(K210_CLK_SRAM0, "sram0", "aclk");
+ REGISTER_COMP_NOMUX(K210_CLK_SRAM1, "sram1", "aclk");
+ REGISTER_COMP_NOMUX(K210_CLK_ROM, "rom", "aclk");
+ REGISTER_COMP_NOMUX(K210_CLK_DVP, "dvp", "aclk");
+ REGISTER_COMP_NOMUX(K210_CLK_APB0, "apb0", "aclk");
+ REGISTER_COMP_NOMUX(K210_CLK_APB1, "apb1", "aclk");
+ REGISTER_COMP_NOMUX(K210_CLK_APB2, "apb2", "aclk");
+ REGISTER_COMP_NOMUX(K210_CLK_AI, "ai", "pll1");
+ REGISTER_COMP_NOMUX(K210_CLK_I2S0, "i2s0", "pll2_half");
+ REGISTER_COMP_NOMUX(K210_CLK_I2S1, "i2s1", "pll2_half");
+ REGISTER_COMP_NOMUX(K210_CLK_I2S2, "i2s2", "pll2_half");
+ REGISTER_COMP_NOMUX(K210_CLK_WDT0, "wdt0", "in0_half");
+ REGISTER_COMP_NOMUX(K210_CLK_WDT1, "wdt1", "in0_half");
+ REGISTER_COMP_NOMUX(K210_CLK_SPI0, "spi0", "pll0_half");
+ REGISTER_COMP_NOMUX(K210_CLK_SPI1, "spi1", "pll0_half");
+ REGISTER_COMP_NOMUX(K210_CLK_SPI2, "spi2", "pll0_half");
+ REGISTER_COMP_NOMUX(K210_CLK_I2C0, "i2c0", "pll0_half");
+ REGISTER_COMP_NOMUX(K210_CLK_I2C1, "i2c1", "pll0_half");
+ REGISTER_COMP_NOMUX(K210_CLK_I2C2, "i2c2", "pll0_half");
+#undef REGISTER_COMP_NOMUX
+
+ /* Dividing clocks */
+#define REGISTER_DIV(id, name, parent) do {\
+ const struct k210_div_params *params = &k210_divs[DIVIFY(id)]; \
+ clk_dm(id, \
+ clk_register_divider(NULL, name, parent, 0, base + params->off, \
+ params->shift, params->width, 0)); \
+} while (false)
+ REGISTER_DIV(K210_CLK_I2S0_M, "i2s0_m", "pll2_half");
+ REGISTER_DIV(K210_CLK_I2S1_M, "i2s1_m", "pll2_half");
+ REGISTER_DIV(K210_CLK_I2S2_M, "i2s2_m", "pll2_half");
+#undef REGISTER_DIV
+
+ /* Gated clocks */
+#define REGISTER_GATE(id, name, parent) do { \
+ const struct k210_gate_params *params = &k210_gates[GATEIFY(id)]; \
+ clk_dm(id, \
+ clk_register_gate(NULL, name, parent, 0, base + params->off, \
+ params->bit_idx, 0, NULL)); \
+} while (false)
+ REGISTER_GATE(K210_CLK_CPU, "cpu", "aclk");
+ REGISTER_GATE(K210_CLK_DMA, "dma", "aclk");
+ REGISTER_GATE(K210_CLK_FFT, "fft", "aclk");
+ REGISTER_GATE(K210_CLK_GPIO, "gpio", "apb0");
+ REGISTER_GATE(K210_CLK_UART1, "uart1", "apb0");
+ REGISTER_GATE(K210_CLK_UART2, "uart2", "apb0");
+ REGISTER_GATE(K210_CLK_UART3, "uart3", "apb0");
+ REGISTER_GATE(K210_CLK_FPIOA, "fpioa", "apb0");
+ REGISTER_GATE(K210_CLK_SHA, "sha", "apb0");
+ REGISTER_GATE(K210_CLK_AES, "aes", "apb1");
+ REGISTER_GATE(K210_CLK_OTP, "otp", "apb1");
+ REGISTER_GATE(K210_CLK_RTC, "rtc", in0);
+#undef REGISTER_GATE
+
+ return 0;
+}
+
+static const struct udevice_id k210_clk_ids[] = {
+ { .compatible = "kendryte,k210-clk" },
+ { },
+};
+
+U_BOOT_DRIVER(k210_clk) = {
+ .name = "k210_clk",
+ .id = UCLASS_CLK,
+ .of_match = k210_clk_ids,
+ .ops = &k210_clk_ops,
+ .probe = k210_clk_probe,
+};
diff --git a/include/dt-bindings/clock/k210-sysctl.h b/include/dt-bindings/clock/k210-sysctl.h
new file mode 100644
index 0000000000..0e3ed3fb9f
--- /dev/null
+++ b/include/dt-bindings/clock/k210-sysctl.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
+ */
+
+#ifndef CLOCK_K210_SYSCTL_H
+#define CLOCK_K210_SYSCTL_H
+
+/*
+ * Arbitrary identifiers for clocks.
+ */
+#define K210_CLK_NONE 0
+#define K210_CLK_IN0_H 1
+#define K210_CLK_PLL0_H 2
+#define K210_CLK_PLL0 3
+#define K210_CLK_PLL1 4
+#define K210_CLK_PLL2 5
+#define K210_CLK_PLL2_H 6
+#define K210_CLK_CPU 7
+#define K210_CLK_SRAM0 8
+#define K210_CLK_SRAM1 9
+#define K210_CLK_APB0 10
+#define K210_CLK_APB1 11
+#define K210_CLK_APB2 12
+#define K210_CLK_ROM 13
+#define K210_CLK_DMA 14
+#define K210_CLK_AI 15
+#define K210_CLK_DVP 16
+#define K210_CLK_FFT 17
+#define K210_CLK_GPIO 18
+#define K210_CLK_SPI0 19
+#define K210_CLK_SPI1 20
+#define K210_CLK_SPI2 21
+#define K210_CLK_SPI3 22
+#define K210_CLK_I2S0 23
+#define K210_CLK_I2S1 24
+#define K210_CLK_I2S2 25
+#define K210_CLK_I2S0_M 26
+#define K210_CLK_I2S1_M 27
+#define K210_CLK_I2S2_M 28
+#define K210_CLK_I2C0 29
+#define K210_CLK_I2C1 30
+#define K210_CLK_I2C2 31
+#define K210_CLK_UART1 32
+#define K210_CLK_UART2 33
+#define K210_CLK_UART3 34
+#define K210_CLK_AES 35
+#define K210_CLK_FPIOA 36
+#define K210_CLK_TIMER0 37
+#define K210_CLK_TIMER1 38
+#define K210_CLK_TIMER2 39
+#define K210_CLK_WDT0 40
+#define K210_CLK_WDT1 41
+#define K210_CLK_SHA 42
+#define K210_CLK_OTP 43
+#define K210_CLK_RTC 44
+#define K210_CLK_ACLK 45
+
+#endif /* CLOCK_K210_SYSCTL_H */
diff --git a/include/dt-bindings/mfd/k210-sysctl.h b/include/dt-bindings/mfd/k210-sysctl.h
new file mode 100644
index 0000000000..bfc918d3ba
--- /dev/null
+++ b/include/dt-bindings/mfd/k210-sysctl.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
+ */
+
+#ifndef K210_SYSCTL_H
+#define K210_SYSCTL_H
+
+/* Taken from kendryte-standalone-sdk/lib/drivers/include/sysctl.h */
+#define K210_SYSCTL_GIT_ID 0x00 /* Git short commit id */
+#define K210_SYSCTL_UART_BAUD 0x04 /* Default UARTHS baud rate */
+#define K210_SYSCTL_PLL0 0x08 /* PLL0 controller */
+#define K210_SYSCTL_PLL1 0x0C /* PLL1 controller */
+#define K210_SYSCTL_PLL2 0x10 /* PLL2 controller */
+#define K210_SYSCTL_PLL_LOCK 0x18 /* PLL lock tester */
+#define K210_SYSCTL_ROM_ERROR 0x1C /* AXI ROM detector */
+#define K210_SYSCTL_SEL0 0x20 /* Clock select controller 0 */
+#define K210_SYSCTL_SEL1 0x24 /* Clock select controller 1 */
+#define K210_SYSCTL_EN_CENT 0x28 /* Central clock enable */
+#define K210_SYSCTL_EN_PERI 0x2C /* Peripheral clock enable */
+#define K210_SYSCTL_SOFT_RESET 0x30 /* Soft reset ctrl */
+#define K210_SYSCTL_PERI_RESET 0x34 /* Peripheral reset controller */
+#define K210_SYSCTL_THR0 0x38 /* Clock threshold controller 0 */
+#define K210_SYSCTL_THR1 0x3C /* Clock threshold controller 1 */
+#define K210_SYSCTL_THR2 0x40 /* Clock threshold controller 2 */
+#define K210_SYSCTL_THR3 0x44 /* Clock threshold controller 3 */
+#define K210_SYSCTL_THR4 0x48 /* Clock threshold controller 4 */
+#define K210_SYSCTL_THR5 0x4C /* Clock threshold controller 5 */
+#define K210_SYSCTL_THR6 0x50 /* Clock threshold controller 6 */
+#define K210_SYSCTL_MISC 0x54 /* Miscellaneous controller */
+#define K210_SYSCTL_PERI 0x58 /* Peripheral controller */
+#define K210_SYSCTL_SPI_SLEEP 0x5C /* SPI sleep controller */
+#define K210_SYSCTL_RESET_STAT 0x60 /* Reset source status */
+#define K210_SYSCTL_DMA_SEL0 0x64 /* DMA handshake selector 0 */
+#define K210_SYSCTL_DMA_SEL1 0x68 /* DMA handshake selector 1 */
+#define K210_SYSCTL_POWER_SEL 0x6C /* IO Power Mode Select controller */
+
+#endif /* K210_SYSCTL_H */
diff --git a/include/kendryte/clk.h b/include/kendryte/clk.h
new file mode 100644
index 0000000000..9c6245d468
--- /dev/null
+++ b/include/kendryte/clk.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
+ */
+
+#ifndef K210_CLK_H
+#define K210_CLK_H
+
+#define LOG_CATEGORY UCLASS_CLK
+#include <linux/types.h>
+#include <linux/clk-provider.h>
+
+static inline struct clk *k210_clk_gate(const char *name,
+ const char *parent_name,
+ void __iomem *reg, u8 bit_idx)
+{
+ return clk_register_gate(NULL, name, parent_name, 0, reg, bit_idx, 0,
+ NULL);
+}
+
+static inline struct clk *k210_clk_half(const char *name,
+ const char *parent_name)
+{
+ return clk_register_fixed_factor(NULL, name, parent_name, 0, 1, 2);
+}
+
+static inline struct clk *k210_clk_div(const char *name,
+ const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width)
+{
+ return clk_register_divider(NULL, name, parent_name, 0, reg, shift,
+ width, 0);
+}
+
+#endif /* K210_CLK_H */
--
2.26.2
More information about the U-Boot
mailing list