[PATCH 1/1] doc: dfu: describe eMMC partition number parameter
Heinrich Schuchardt
xypron.glpk at gmx.de
Sat May 23 11:36:49 CEST 2020
In dfu_alt_info for eMMC the eMMC partition number can be specified.
The separator in dfu_alt_info is a semicolon not a comma.
Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
---
doc/README.dfu | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/doc/README.dfu b/doc/README.dfu
index caf1c9998c..29230ec654 100644
--- a/doc/README.dfu
+++ b/doc/README.dfu
@@ -49,7 +49,7 @@ Configuration Options:
Environment variables:
the dfu command use 3 environments variables:
- "dfu_alt_info" : the DFU setting for the USB download gadget with a comma
+ "dfu_alt_info" : the DFU setting for the USB download gadget with a semicolon
separated string of information on each alternate:
dfu_alt_info="<alt1>;<alt2>;....;<altN>"
@@ -87,12 +87,21 @@ Commands:
"mmc" (for eMMC and SD card)
cmd: dfu 0 mmc <dev>
each element in "dfu_alt_info" =
- <name> raw <offset> <size> raw access to mmc device
- <name> part <dev> <part_id> raw acces to partition
- <name> fat <dev> <part_id> file in FAT partition
- <name> ext4 <dev> <part_id> file in EXT4 partition
+ <name> raw <offset> <size> [mmcpart <num>] raw access to mmc device
+ <name> part <dev> <part_id> [mmcpart <num>] raw access to partition
+ <name> fat <dev> <part_id> [mmcpart <num>] file in FAT partition
+ <name> ext4 <dev> <part_id> [mmcpart <num>] file in EXT4 partition
+
+ with <partid> being the GPT or DOS partition index,
+ with <num> being the eMMC hardware partition number.
+
+ A value of environment variable dfu_alt_info for eMMC could be:
+
+ "u-boot raw 0x3e 0x800 mmcpart 1;bl2 raw 0x1e 0x1d mmcpart 1"
+
+ A value of environment variable dfu_alt_info for SD card could be:
- with <partid> is the GPT or DOS partition index
+ "u-boot raw 0x80 0x800;uImage ext4 0 2"
"nand" (raw slc nand device)
cmd: dfu 0 nand <dev>
--
2.26.2
More information about the U-Boot
mailing list