[PATCH v11 00/18] RISC-V SiFive FU540 support SPL

Bin Meng bmeng.cn at gmail.com
Wed May 20 08:32:27 CEST 2020


Hi Sean,

On Wed, May 20, 2020 at 2:06 PM Sean Anderson <seanga2 at gmail.com> wrote:
>
> On 5/19/20 11:07 PM, Rick Chen wrote:
> > Hi Bin
> >
> >> -----Original Message-----
> >> From: Bin Meng [mailto:bmeng.cn at gmail.com]
> >> Sent: Tuesday, May 19, 2020 4:44 PM
> >> To: Pragnesh Patel; Rick Jian-Zhi Chen(陳建志)
> >> Subject: Re: [PATCH v11 00/18] RISC-V SiFive FU540 support SPL
> >>
> >> Hi Rick,
> >>
> >> On Tue, May 19, 2020 at 3:04 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote:
> >>>
> >>> This series add support for SPL to FU540. U-Boot SPL can boot from
> >>> L2 LIM (0x0800_0000) and jump to OpenSBI(FW_DYNAMIC firmware) and
> >>> U-Boot proper from MMC devices.
> >>>
> >>> This series depends on:
> >>> [1] https://patchwork.ozlabs.org/patch/1281853
> >>> [2] https://patchwork.ozlabs.org/patch/1281852
> >>>
> >>> All these together is available for testing here [3] [3]
> >>> https://github.com/pragnesh26992/u-boot/tree/spl
> >>>
> >>> How to test this patch:
> >>> 1) Go to OpenSBI-dir : make PLATFORM=generic FW_DYNAMIC=y
> >>> 2) export
> >>> OPENSBI=<path/to/opensbi/build/platform/generic/firmware/fw_dynamic.bi
> >>> n>
> >>> 3) Change to u-boot-dir
> >>> 4) make sifive_fu540_defconfig
> >>> 5) make all
> >>> 6) Format the SD card (make sure the disk has GPT, otherwise use gdisk
> >>> to switch)
> >>>
> >>>         # sudo sgdisk --clear \
> >>>         > --set-alignment=2 \
> >>>         > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \
> >>>         > --new=2:2082:10273 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \
> >>>         > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \
> >>>         > /dev/sda
> >>>
> >>> 7) sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34
> >>> 8) sudo dd if=u-boot.itb of=/dev/sda seek=2082
> >>>
> >>> Changes in v11:
> >>> - Remove TPL related code and OF_PLATDATA from FU540
> >>>   DDR driver (drivers/ram/sifive/fu540_ddr.c)
> >>> - Update FU540 doc (doc/board/sifive/fu540.rst)
> >>>   Remove unnecessary print
> >>
> >> Could we get this v11 applied as soon as possible for v2020.07?
> >
> > No problem, if everything is OK, I will applied ASAP.
> > But Jagan seem have some responses, please check about it.
> >
> >>
> >>> This series depends on:
> >>> [1] https://patchwork.ozlabs.org/patch/1281853
> >>> [2] https://patchwork.ozlabs.org/patch/1281852
> >>
> >> Looks this series "riscv: Add Sipeed Maix support" was not applied neither ?
> >
> > Yes, the reason is that the CI verification of v10 of this series
> > "riscv: Add Sipeed Maix support" still fail.
> > Please check the discussion of [v10,20/21] doc: riscv: Add
> > documentation for Sipeed Maix Bit
> >
> > https://patchwork.ozlabs.org/project/uboot/patch/20200503024637.327733-21-seanga2@gmail.com/
> >
> > That is why I still not pull it yet.
> >
> > Thanks,
> > Rick
>
> I think I have fixed the bug. However, travis is currently failing
> during apt with
>
> E: Failed to fetch https://apt.llvm.org/bionic/dists/llvm-toolchain-bionic-10/main/binary-amd64/Packages.gz  File has unexpected size (8765 != 8774). Mirror sync in progress? [IP: 151.101.186.49 443]
>    Release file created at: Tue, 19 May 2020 21:55:10 +0000

Travis is not stable. Could you please try Azure?

>
> I will probably submit v11 in the morning, once the llvm repo gets
> fixed. Hopefully this will be the last revision :)

Regards,
Bin


More information about the U-Boot mailing list