[PATCH v7 10/14] xhci: mediatek: Add support for MTK xHCI host controller
Jagan Teki
jagan at amarulasolutions.com
Fri May 1 19:30:40 CEST 2020
On Wed, Apr 29, 2020 at 11:46 AM Chunfeng Yun <chunfeng.yun at mediatek.com> wrote:
>
> This patch is used to support the on-chip xHCI controller on
> MediaTek SoCs, currently control/bulk/interrupt transfers are
> supported.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> Reviewed-by: Weijie Gao <weijie.gao at mediatek.com>
> ---
> v7: use new API of phy bulk
>
> v6: add Reviewed-by Weijie
>
> v5:
> 1. print error number suggested by Marek
> 2. support interrupt transfer
>
> v4:
> 1. use phy_bulk API
>
> v3:
> 1. use macro approach to access registers suggested by Marek
>
> v2:
> 1. use clk_bulk to get clocks suggested by Marek
> 2. use clrsetbits_le32() etc suggeseted by Marek
> ---
> drivers/usb/host/Kconfig | 6 +
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/xhci-mtk.c | 303 ++++++++++++++++++++++++++++++++++++
> drivers/usb/host/xhci.c | 10 ++
> include/usb/xhci.h | 3 +
> 5 files changed, 323 insertions(+)
> create mode 100644 drivers/usb/host/xhci-mtk.c
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 94ac969058..2f381dc958 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -30,6 +30,12 @@ config USB_XHCI_DWC3_OF_SIMPLE
> Support USB2/3 functionality in simple SoC integrations with
> USB controller based on the DesignWare USB3 IP Core.
>
> +config USB_XHCI_MTK
> + bool "Support for MediaTek on-chip xHCI USB controller"
> + depends on ARCH_MEDIATEK
> + help
> + Enables support for the on-chip xHCI controller on MediaTek SoCs.
> +
> config USB_XHCI_MVEBU
> bool "MVEBU USB 3.0 support"
> default y
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index b62f346094..e8e3b17e42 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -51,6 +51,7 @@ obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
> obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
> obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
> obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
> +obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
> obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
> obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
> obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> new file mode 100644
> index 0000000000..7c71fe728d
> --- /dev/null
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -0,0 +1,303 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek, Inc.
> + * Authors: Chunfeng Yun <chunfeng.yun at mediatek.com>
> + */
> +
> +#include <clk.h>
> +#include <common.h>
> +#include <dm.h>
> +#include <dm/devres.h>
> +#include <generic-phy.h>
> +#include <malloc.h>
> +#include <usb.h>
> +#include <linux/errno.h>
> +#include <linux/compat.h>
> +#include <power/regulator.h>
> +#include <linux/iopoll.h>
> +#include <usb/xhci.h>
> +
> +/* IPPC (IP Port Control) registers */
> +#define IPPC_IP_PW_CTRL0 0x00
> +#define CTRL0_IP_SW_RST BIT(0)
> +
> +#define IPPC_IP_PW_CTRL1 0x04
> +#define CTRL1_IP_HOST_PDN BIT(0)
> +
> +#define IPPC_IP_PW_STS1 0x10
> +#define STS1_IP_SLEEP_STS BIT(30)
> +#define STS1_U3_MAC_RST BIT(16)
> +#define STS1_XHCI_RST BIT(11)
> +#define STS1_SYS125_RST BIT(10)
> +#define STS1_REF_RST BIT(8)
> +#define STS1_SYSPLL_STABLE BIT(0)
> +
> +#define IPPC_IP_XHCI_CAP 0x24
> +#define CAP_U3_PORT_NUM(p) ((p) & 0xff)
> +#define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff)
> +
> +#define IPPC_U3_CTRL_0P 0x30
> +#define CTRL_U3_PORT_HOST_SEL BIT(2)
> +#define CTRL_U3_PORT_PDN BIT(1)
> +#define CTRL_U3_PORT_DIS BIT(0)
> +
> +#define IPPC_U2_CTRL_0P 0x50
> +#define CTRL_U2_PORT_HOST_SEL BIT(2)
> +#define CTRL_U2_PORT_PDN BIT(1)
> +#define CTRL_U2_PORT_DIS BIT(0)
> +
> +#define IPPC_U3_CTRL(p) (IPPC_U3_CTRL_0P + ((p) * 0x08))
> +#define IPPC_U2_CTRL(p) (IPPC_U2_CTRL_0P + ((p) * 0x08))
> +
> +struct mtk_xhci {
> + struct xhci_ctrl ctrl; /* Needs to come first in this struct! */
> + struct xhci_hccr *hcd;
> + void __iomem *ippc;
> + struct udevice *dev;
> + struct udevice *vusb33_supply;
> + struct udevice *vbus_supply;
> + struct clk_bulk clks;
> + struct phy_bulk phys;
> + int num_u2ports;
> + int num_u3ports;
> +};
> +
> +static int xhci_mtk_host_enable(struct mtk_xhci *mtk)
> +{
> + u32 value;
> + u32 check_val;
> + int ret;
> + int i;
> +
> + /* power on host ip */
> + clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
> +
> + /* power on and enable all u3 ports */
> + for (i = 0; i < mtk->num_u3ports; i++) {
> + clrsetbits_le32(mtk->ippc + IPPC_U3_CTRL(i),
> + CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS,
> + CTRL_U3_PORT_HOST_SEL);
> + }
> +
> + /* power on and enable all u2 ports */
> + for (i = 0; i < mtk->num_u2ports; i++) {
> + clrsetbits_le32(mtk->ippc + IPPC_U2_CTRL(i),
> + CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS,
> + CTRL_U2_PORT_HOST_SEL);
> + }
> +
> + /*
> + * wait for clocks to be stable, and clock domains reset to
> + * be inactive after power on and enable ports
> + */
> + check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
> + STS1_SYS125_RST | STS1_XHCI_RST;
> +
> + if (mtk->num_u3ports)
> + check_val |= STS1_U3_MAC_RST;
> +
> + ret = readl_poll_timeout(mtk->ippc + IPPC_IP_PW_STS1, value,
> + (check_val == (value & check_val)), 20000);
> + if (ret)
> + dev_err(mtk->dev, "clocks are not stable 0x%x!\n", value);
> +
> + return ret;
> +}
> +
> +static int xhci_mtk_host_disable(struct mtk_xhci *mtk)
> +{
> + int i;
> +
> + /* power down all u3 ports */
> + for (i = 0; i < mtk->num_u3ports; i++)
> + setbits_le32(mtk->ippc + IPPC_U3_CTRL(i), CTRL_U3_PORT_PDN);
> +
> + /* power down all u2 ports */
> + for (i = 0; i < mtk->num_u2ports; i++)
> + setbits_le32(mtk->ippc + IPPC_U2_CTRL(i), CTRL_U2_PORT_PDN);
> +
> + /* power down host ip */
> + setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
> +
> + return 0;
> +}
> +
> +static int xhci_mtk_ssusb_init(struct mtk_xhci *mtk)
> +{
> + u32 value;
> +
> + /* reset whole ip */
> + setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
> + udelay(1);
> + clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
> +
> + value = readl(mtk->ippc + IPPC_IP_XHCI_CAP);
> + mtk->num_u3ports = CAP_U3_PORT_NUM(value);
> + mtk->num_u2ports = CAP_U2_PORT_NUM(value);
> + dev_info(mtk->dev, "u2p:%d, u3p:%d\n",
> + mtk->num_u2ports, mtk->num_u3ports);
> +
> + return xhci_mtk_host_enable(mtk);
> +}
> +
> +static int xhci_mtk_ofdata_get(struct mtk_xhci *mtk)
> +{
> + struct udevice *dev = mtk->dev;
> + int ret = 0;
> +
> + mtk->hcd = devfdt_remap_addr_name(dev, "mac");
> + if (!mtk->hcd) {
> + dev_err(dev, "failed to get xHCI base address\n");
> + return -ENXIO;
> + }
> +
> + mtk->ippc = devfdt_remap_addr_name(dev, "ippc");
> + if (!mtk->ippc) {
> + dev_err(dev, "failed to get IPPC base address\n");
> + return -ENXIO;
> + }
> +
> + dev_info(dev, "hcd: 0x%p, ippc: 0x%p\n", mtk->hcd, mtk->ippc);
> +
> + ret = clk_get_bulk(dev, &mtk->clks);
> + if (ret) {
> + dev_err(dev, "failed to get clocks %d!\n", ret);
> + return ret;
> + }
> +
> + ret = device_get_supply_regulator(dev, "vusb33-supply",
> + &mtk->vusb33_supply);
> + if (ret)
> + debug("can't get vusb33 regulator %d!\n", ret);
> +
> + ret = device_get_supply_regulator(dev, "vbus-supply",
> + &mtk->vbus_supply);
> + if (ret)
> + debug("can't get vbus regulator %d!\n", ret);
> +
> + return 0;
> +}
> +
> +static int xhci_mtk_ldos_enable(struct mtk_xhci *mtk)
> +{
> + int ret;
> +
> + ret = regulator_set_enable(mtk->vusb33_supply, true);
> + if (ret < 0 && ret != -ENOSYS) {
> + dev_err(mtk->dev, "failed to enable vusb33 %d!\n", ret);
> + return ret;
> + }
> +
> + ret = regulator_set_enable(mtk->vbus_supply, true);
> + if (ret < 0 && ret != -ENOSYS) {
> + dev_err(mtk->dev, "failed to enable vbus %d!\n", ret);
> + regulator_set_enable(mtk->vusb33_supply, false);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void xhci_mtk_ldos_disable(struct mtk_xhci *mtk)
> +{
> + regulator_set_enable(mtk->vbus_supply, false);
> + regulator_set_enable(mtk->vusb33_supply, false);
> +}
> +
> +int xhci_mtk_phy_setup(struct mtk_xhci *mtk)
> +{
> + struct udevice *dev = mtk->dev;
> + struct phy_bulk *phys = &mtk->phys;
> + int ret;
> +
> + ret = generic_phy_get_bulk(dev, phys);
> + if (ret)
> + return ret;
> +
> + ret = generic_phy_init_bulk(phys);
> + if (ret)
> + return ret;
> +
> + ret = generic_phy_power_on_bulk(phys);
> + if (ret)
> + generic_phy_exit_bulk(phys);
> +
> + return ret;
> +}
> +
> +void xhci_mtk_phy_shutdown(struct mtk_xhci *mtk)
> +{
> + generic_phy_power_off_bulk(&mtk->phys);
> + generic_phy_exit_bulk(&mtk->phys);
> +}
Hope these are local functions, if yes mark it as static.
otherwise,
Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>
More information about the U-Boot
mailing list