[PATCH 1/3] doc: dt-bindings: tsec: Correct the Ethernet port compatible string

[Vladimir Oltean]

On Sun, 3 May 2020 at 09:28, Zhiqiang Hou <Zhiqiang.Hou at nxp.com> wrote:
>
> From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
>
> Change the compatible string to "fsl,etsec2" for the Ethernet ports,
> which is used in the current driver's match table.
>
> Fixes: 69a00875e3db ("doc: dt-bindings: Describe Freescale TSEC ethernet controller")
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> ---

Acked-by: Vladimir Oltean <vladimir.oltean at nxp.com>

Although I am unclear how the G&D MPC8308 boards
(arch/powerpc/dts/gdsys/mpc8308.dtsi) have ever probed their TSEC
interfaces. Probably not based on DM, since the fsl,tsec compatible
string has never been supported by the mainline tsec driver.

>  doc/device-tree-bindings/net/fsl-tsec-phy.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/doc/device-tree-bindings/net/fsl-tsec-phy.txt b/doc/device-tree-bindings/net/fsl-tsec-phy.txt
> index 59989e3b09..8e8574bc97 100644
> --- a/doc/device-tree-bindings/net/fsl-tsec-phy.txt
> +++ b/doc/device-tree-bindings/net/fsl-tsec-phy.txt
> @@ -2,7 +2,7 @@
>
>  Properties:
>
> -  - compatible : Should be "fsl,tsec"
> +  - compatible : Should be "fsl,etsec2"
>    - reg : Offset and length of the register set for the device
>    - phy-handle : See ethernet.txt file in the same directory.
>    - phy-connection-type : See ethernet.txt file in the same directory. This
> @@ -12,7 +12,7 @@ Properties:
>
>  Example:
>         ethernet at 24000 {
> -               compatible = "fsl,tsec";
> +               compatible = "fsl,etsec2";
>                 reg = <0x24000 0x1000>;
>                 phy-handle = <&phy0>;
>                 phy-connection-type = "sgmii";
> --
> 2.17.1
>