[PATCHv4 0/9] Introduce B1x5v2 support

[Stefano Babic]

Hi Sebastian,

I integrated the patches but the MAINTAINERS file for B1x5v2 is missing. 
Can you send a follow-up patch to fix this ? (Or just a V5 for 9/9, your 
choice).

Regards,
Stefano

On 02.09.20 19:31, Sebastian Reichel wrote:
> This series introduces support for a new i.MX6DL based GE patient
> monitor series.
> 
> Patch 1: Add support for storing bootcount in SPI-flash
> Patch 2+3: Improve M41T62 RTC driver's reset routine.
> PATCH 4: Support disable_ldb_di_clock_sources for i.MX6DL
> Patch 5: Add poweroff-gpio support
> Patch 6-8: restructure common GE code
> Patch 9: Add the actual board, using SPL and DM
> 
> Changes since PATCHv3 [0]:
>   * Dropped patch for reading DR for i.MX GPIOs and set
>     SION pinmux bits in B1x5v2 output GPIOs instead
>   * Rebased to v2020.10-rc3
> 
> Changes since PATCHv2:
> 
> * PATCH 10: Fixed network phy mode ("rgmii" -> "rgmii-id")
> * PATCH 6: Fixed nits reported by Simon Glass and added is
>    Reviewed-by Tag.
> 
> Changes since PATCHv1:
> 
> * Rebased to v2020.10-rc2
> * Original patch 1 (support for DM_SPI_FLASH with non-DM SPL)
>    has been dropped, since a similar patch has been merged
>    in the meantime
> * poweroff-gpio support is now added using sysreset uclass
>    instead of introducing a new poweroff uclass
> * B1x5v2 patch has been updated to follow recent U-Boot
>    changes and to add USB mass storage support
> 
> [0] http://patchwork.ozlabs.org/project/uboot/list/?series=196979
> 
> -- Sebastian
> 
> Sebastian Reichel (9):
>    bootcount: add a DM SPI flash backing store for bootcount
>    rtc: m41t62: reset SQW in m41t62_rtc_reset
>    rtc: m41t62: add oscillator fail bit reset support
>    imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL
>    sysreset: Add poweroff-gpio driver
>    board: ge: common: rename ge_common.c to ge_rtc.c
>    board: ge: common: add config option for RTC and VPD feature
>    board: ge: common: vpd: separate I2C specific code
>    board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
> 
>   arch/arm/dts/Makefile                     |   1 +
>   arch/arm/dts/imx6dl-b1x5v2.dts            | 654 ++++++++++++++++++++
>   arch/arm/mach-imx/mx6/Kconfig             |   9 +
>   arch/arm/mach-imx/mx6/clock.c             |   2 +-
>   board/ge/b1x5v2/Kconfig                   |  14 +
>   board/ge/b1x5v2/Makefile                  |   6 +
>   board/ge/b1x5v2/b1x5v2.c                  | 698 ++++++++++++++++++++++
>   board/ge/b1x5v2/spl.c                     | 587 ++++++++++++++++++
>   board/ge/bx50v3/Kconfig                   |   2 +
>   board/ge/bx50v3/bx50v3.c                  |   4 +-
>   board/ge/common/Kconfig                   |   7 +
>   board/ge/common/Makefile                  |   3 +-
>   board/ge/common/{ge_common.c => ge_rtc.c} |   0
>   board/ge/common/{ge_common.h => ge_rtc.h} |   0
>   board/ge/common/vpd_reader.c              |  12 +-
>   board/ge/common/vpd_reader.h              |  23 +-
>   board/ge/mx53ppd/Kconfig                  |   2 +
>   board/ge/mx53ppd/mx53ppd.c                |   4 +-
>   configs/ge_b1x5v2_defconfig               | 137 +++++
>   drivers/bootcount/Kconfig                 |  10 +
>   drivers/bootcount/Makefile                |   1 +
>   drivers/bootcount/spi-flash.c             | 125 ++++
>   drivers/rtc/m41t62.c                      | 139 ++++-
>   drivers/sysreset/Kconfig                  |   7 +
>   drivers/sysreset/Makefile                 |   1 +
>   drivers/sysreset/poweroff_gpio.c          |  92 +++
>   include/configs/ge_b1x5v2.h               | 127 ++++
>   27 files changed, 2645 insertions(+), 22 deletions(-)
>   create mode 100644 arch/arm/dts/imx6dl-b1x5v2.dts
>   create mode 100644 board/ge/b1x5v2/Kconfig
>   create mode 100644 board/ge/b1x5v2/Makefile
>   create mode 100644 board/ge/b1x5v2/b1x5v2.c
>   create mode 100644 board/ge/b1x5v2/spl.c
>   create mode 100644 board/ge/common/Kconfig
>   rename board/ge/common/{ge_common.c => ge_rtc.c} (100%)
>   rename board/ge/common/{ge_common.h => ge_rtc.h} (100%)
>   create mode 100644 configs/ge_b1x5v2_defconfig
>   create mode 100644 drivers/bootcount/spi-flash.c
>   create mode 100644 drivers/sysreset/poweroff_gpio.c
>   create mode 100644 include/configs/ge_b1x5v2.h
> 

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================