[PATCHv4 0/9] Introduce B1x5v2 support

[Stefano Babic]

Hi Sebastian,

On 02.11.20 09:07, Stefano Babic wrote:
> Hi Sebastian,
> 
> I integrated the patches but the MAINTAINERS file for B1x5v2 is missing. 
> Can you send a follow-up patch to fix this ? (Or just a V5 for 9/9, your 
> choice).

Just send a follow-up patch, thanks.

Regards,
Stefano

> 
> Regards,
> Stefano
> 
> On 02.09.20 19:31, Sebastian Reichel wrote:
>> This series introduces support for a new i.MX6DL based GE patient
>> monitor series.
>>
>> Patch 1: Add support for storing bootcount in SPI-flash
>> Patch 2+3: Improve M41T62 RTC driver's reset routine.
>> PATCH 4: Support disable_ldb_di_clock_sources for i.MX6DL
>> Patch 5: Add poweroff-gpio support
>> Patch 6-8: restructure common GE code
>> Patch 9: Add the actual board, using SPL and DM
>>
>> Changes since PATCHv3 [0]:
>>   * Dropped patch for reading DR for i.MX GPIOs and set
>>     SION pinmux bits in B1x5v2 output GPIOs instead
>>   * Rebased to v2020.10-rc3
>>
>> Changes since PATCHv2:
>>
>> * PATCH 10: Fixed network phy mode ("rgmii" -> "rgmii-id")
>> * PATCH 6: Fixed nits reported by Simon Glass and added is
>>    Reviewed-by Tag.
>>
>> Changes since PATCHv1:
>>
>> * Rebased to v2020.10-rc2
>> * Original patch 1 (support for DM_SPI_FLASH with non-DM SPL)
>>    has been dropped, since a similar patch has been merged
>>    in the meantime
>> * poweroff-gpio support is now added using sysreset uclass
>>    instead of introducing a new poweroff uclass
>> * B1x5v2 patch has been updated to follow recent U-Boot
>>    changes and to add USB mass storage support
>>
>> [0] http://patchwork.ozlabs.org/project/uboot/list/?series=196979
>>
>> -- Sebastian
>>
>> Sebastian Reichel (9):
>>    bootcount: add a DM SPI flash backing store for bootcount
>>    rtc: m41t62: reset SQW in m41t62_rtc_reset
>>    rtc: m41t62: add oscillator fail bit reset support
>>    imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL
>>    sysreset: Add poweroff-gpio driver
>>    board: ge: common: rename ge_common.c to ge_rtc.c
>>    board: ge: common: add config option for RTC and VPD feature
>>    board: ge: common: vpd: separate I2C specific code
>>    board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
>>
>>   arch/arm/dts/Makefile                     |   1 +
>>   arch/arm/dts/imx6dl-b1x5v2.dts            | 654 ++++++++++++++++++++
>>   arch/arm/mach-imx/mx6/Kconfig             |   9 +
>>   arch/arm/mach-imx/mx6/clock.c             |   2 +-
>>   board/ge/b1x5v2/Kconfig                   |  14 +
>>   board/ge/b1x5v2/Makefile                  |   6 +
>>   board/ge/b1x5v2/b1x5v2.c                  | 698 ++++++++++++++++++++++
>>   board/ge/b1x5v2/spl.c                     | 587 ++++++++++++++++++
>>   board/ge/bx50v3/Kconfig                   |   2 +
>>   board/ge/bx50v3/bx50v3.c                  |   4 +-
>>   board/ge/common/Kconfig                   |   7 +
>>   board/ge/common/Makefile                  |   3 +-
>>   board/ge/common/{ge_common.c => ge_rtc.c} |   0
>>   board/ge/common/{ge_common.h => ge_rtc.h} |   0
>>   board/ge/common/vpd_reader.c              |  12 +-
>>   board/ge/common/vpd_reader.h              |  23 +-
>>   board/ge/mx53ppd/Kconfig                  |   2 +
>>   board/ge/mx53ppd/mx53ppd.c                |   4 +-
>>   configs/ge_b1x5v2_defconfig               | 137 +++++
>>   drivers/bootcount/Kconfig                 |  10 +
>>   drivers/bootcount/Makefile                |   1 +
>>   drivers/bootcount/spi-flash.c             | 125 ++++
>>   drivers/rtc/m41t62.c                      | 139 ++++-
>>   drivers/sysreset/Kconfig                  |   7 +
>>   drivers/sysreset/Makefile                 |   1 +
>>   drivers/sysreset/poweroff_gpio.c          |  92 +++
>>   include/configs/ge_b1x5v2.h               | 127 ++++
>>   27 files changed, 2645 insertions(+), 22 deletions(-)
>>   create mode 100644 arch/arm/dts/imx6dl-b1x5v2.dts
>>   create mode 100644 board/ge/b1x5v2/Kconfig
>>   create mode 100644 board/ge/b1x5v2/Makefile
>>   create mode 100644 board/ge/b1x5v2/b1x5v2.c
>>   create mode 100644 board/ge/b1x5v2/spl.c
>>   create mode 100644 board/ge/common/Kconfig
>>   rename board/ge/common/{ge_common.c => ge_rtc.c} (100%)
>>   rename board/ge/common/{ge_common.h => ge_rtc.h} (100%)
>>   create mode 100644 configs/ge_b1x5v2_defconfig
>>   create mode 100644 drivers/bootcount/spi-flash.c
>>   create mode 100644 drivers/sysreset/poweroff_gpio.c
>>   create mode 100644 include/configs/ge_b1x5v2.h
>>
> 

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================