[PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

Stefan Roese sr at denx.de
Thu Oct 1 14:37:36 CEST 2020


On 25.09.20 09:54, Pali Rohár wrote:
> Some Espressobin boards got assigned more than one MAC address. Update
> instructions how to correctly store and preserve all MAC addresses.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
>   doc/README.marvell | 23 +++++++++++++++++------
>   1 file changed, 17 insertions(+), 6 deletions(-)
> 
> diff --git a/doc/README.marvell b/doc/README.marvell
> index 5416bc3035..6fc5ac8a40 100644
> --- a/doc/README.marvell
> +++ b/doc/README.marvell
> @@ -27,7 +27,7 @@ Build Procedure
>   	- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
>   	- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
>   	- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
> -	- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
> +	- For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
>   
>   5. Configure the device-tree and build the U-Boot image:
>   
> @@ -62,11 +62,15 @@ Configuration update
>   Permanent ethernet MAC address
>   -------------------------------
>   	Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
> -	permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
> -	Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
> -	address run:
> +	permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
> +	Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
> +	only one address other may also more than one. To print current MAC addresses run:
>   
>   		# echo $ethaddr
> +		# echo $eth1addr
> +		# echo $eth2addr
> +		# echo $eth3addr
> +		# ...
>   
>   	MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
>   	and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
> @@ -75,13 +79,20 @@ Permanent ethernet MAC address
>   	suggested to generate new random one.
>   
>   	After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
> -	and then set correct permanent ethernet MAC address.
> +	and then set correct permanent ethernet MAC addresses.
>   
>   		# env default -a
>   		# setenv ethaddr XX:XX:XX:XX:XX:XX
> +		# setenv eth1addr XX:XX:XX:XX:XX:XX
> +		# setenv eth2addr YY:YY:YY:YY:YY:YY
> +		# setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
> +		# ...
>   		# saveenv
>   
> -	Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
> +	Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
> +	are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
> +	they are inherited from required ethaddr variable. eth1addr contains MAC address for the
> +	wan port, other for particular lan ports.
>   
>   	Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
>   	U-Boot will inject it into kernel's device-tree.
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list