October 2020 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Oct 1 00:59:35 CEST 2020
Ending: Sat Oct 31 17:32:50 CET 2020
Messages: 3251

• [PATCH 1/1] video: support colors in truetype console   Heinrich Schuchardt
• [PATCH v3] i2c: rcar_i2c: Fix i2c read/write errors   Marek Vasut
• stm32mp: The purpose of "!tee_find_device()"   Alex G.
• [PATCH 1/1] usb: xhci: avoid type conversion of void *   Heinrich Schuchardt
• [PATCH v2] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v3] i2c: rcar_i2c: Fix i2c read/write errors   Heiko Schocher
• [PATCH v3] i2c: rcar_i2c: Fix i2c read/write errors   Heiko Schocher
• [RFC PATCH v2 1/1] Fix missing __udivdi3 in SquashFS implementation.   Thomas Petazzoni
• [RFC PATCH v2 1/1] Fix missing __udivdi3 in SquashFS implementation.   Miquel Raynal
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Pali Rohár
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] u-boot-sh/next   Marek Vasut
• [PULL] u-boot-usb/next   Marek Vasut
• [PATCH 1/1] usb: xhci: avoid type conversion of void *   Marek Vasut
• ARM: zynq: Add Z-turn board V5   agriveaux at deutnet.info
• [PATCH v2] ARM: zynq: Add Z-turn board V5   agriveaux at deutnet.info
• [PATCH v2 1/6] arm64: PIE: Do not skip static relocation   Amit Tomar
• [RFC PATCH v2 1/1] Fix missing __udivdi3 in SquashFS implementation.   Mauro Condarelli
• [RESEND PATCH v5 9/11] ARM: socfpga: Add initial support for ic-automation Moritz III   Tan, Ley Foon
• [RFC PATCH v2 1/1] Fix missing __udivdi3 in SquashFS implementation.   Mauro Condarelli
• [RFC PATCH v2 1/1] Fix missing __udivdi3 in SquashFS implementation.   Miquel Raynal
• [v2, 00/16] Enable ARM Trusted Firmware for U-Boot   Siew Chin Lim
• [v2, 01/16] arm: socfpga: soc64: Remove CONFIG_OF_EMBED   Siew Chin Lim
• [v2, 02/16] arm: socfpga: soc64: Add FIT generator script for pack itb with ATF   Siew Chin Lim
• [v2, 03/16] arm: socfpga: Add function for checking description from FIT image   Siew Chin Lim
• [v2, 04/16] arm: socfpga: soc64: Load FIT image with ATF support   Siew Chin Lim
• [v2, 05/16] arm: socfpga: soc64: Override 'lowlevel_init' to support ATF   Siew Chin Lim
• [v2, 06/16] arm: socfpga: Disable "spin-table" method for booting Linux   Siew Chin Lim
• [v2, 07/16] arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA (64bits)   Siew Chin Lim
• [v2, 08/16] arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP services   Siew Chin Lim
• [v2, 09/16] mmc: dwmmc: socfpga: Add ATF support for MMC driver   Siew Chin Lim
• [v2, 10/16] net: designware: socfpga: Add ATF support for MAC driver   Siew Chin Lim
• [v2, 11/16] arm: socfpga: soc64: Add ATF support for Reset Manager driver   Siew Chin Lim
• [v2, 12/16] arm: socfpga: soc64: Add ATF support for FPGA reconfig driver   Siew Chin Lim
• [v2, 13/16] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()   Siew Chin Lim
• [v2, 14/16] arm: socfpga: soc64: SSBL shall not setup stack on OCRAM   Siew Chin Lim
• [v2, 15/16] arm: socfpga: soc64: Skip handoff data access in SSBL   Siew Chin Lim
• [v2, 16/16] configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF support   Siew Chin Lim
• STM32MP1: Adding TF-A causes kernel errors   Jan Kiszka
• [RFC PATCH v2 1/1] Fix missing __udivdi3 in SquashFS implementation.   Mauro Condarelli
• [U-Boot] Please pull from u-boot-i2c for 2020.10   Heiko Schocher
• [PATCH] ARM: dts: stm32: Add missing dm-spl props for SPI NOR on AV96   Marek Vasut
• [PATCH v2] cpu: at91: add driver for CPU   Claudiu Beznea
• [PATCH v4 1/2] arm: rmobile: Add PRR CPU ID macros for RZ/G2[HMNE]   Biju Das
• [PATCH v4 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Heinrich Schuchardt
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Pali Rohár
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Stefan Roese
• [PATCH] i2c: mvtwsi: disable i2c slave also on Armada 8k   Baruch Siach
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Stefan Roese
• [PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 1/2] spl: Avoid printing boot device if silent console is enabled   Stefan Roese
• [PATCH v2] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support   Teresa Remmet
• [PATCH] ARM: dts: stm32: Add missing dm-spl props for SPI NOR on AV96   Patrice CHOTARD
• [PATCH v3 1/2] drivers: reset: Add a managed API to get reset controllers from the DT   Tom Rini
• [PATCH v3 2/2] test: reset: Add tests for the managed API   Tom Rini
• [PATCH v4 1/8] firmware: add SCMI agent uclass   Tom Rini
• [PATCH v4 2/8] firmware: scmi: mailbox/smt agent device   Tom Rini
• [PATCH v4 3/8] firmware: scmi: support Arm SMCCC transport   Tom Rini
• [PATCH v4 4/8] dt-bindings: arm: SCMI bindings documentation   Tom Rini
• [PATCH v4 5/8] clk: add clock driver for SCMI agents   Tom Rini
• [PATCH v4 6/8] firmware: scmi: sandbox test for SCMI clocks   Tom Rini
• [PATCH v4 7/8] reset: add reset controller driver for SCMI agents   Tom Rini
• [PATCH v4 8/8] firmware: smci: sandbox test for SCMI reset controllers   Tom Rini
• [PATCH v5 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Tom Rini
• [PATCH v5 2/2] test: gpio: Add tests for the managed API   Tom Rini
• [PATCH v3 1/9] regmap: Add devm_regmap_init()   Tom Rini
• [PATCH v3 2/9] regmap: zero out the regmap on allocation   Tom Rini
• [PATCH v3 3/9] regmap: Allow specifying read/write width   Tom Rini
• [PATCH v3 4/9] regmap: Allow left shifting register offset before access   Tom Rini
• [PATCH v3 5/9] regmap: Add regmap_init_mem_range()   Tom Rini
• [PATCH v3 6/9] regmap: Allow devices to specify regmap range start and size in config   Tom Rini
• [PATCH v3 7/9] regmap: Add support for regmap fields   Tom Rini
• [PATCH v3 8/9] test/py: allow multi-digit index in in_tree()   Tom Rini
• [PATCH v3 9/9] test: dm: Add tests for regmap managed API and regmap fields   Tom Rini
• [PATCH v3 1/1] phy: add support for stingray PAXB PHY controller   Tom Rini
• [PATCH 1/2] net: phy: mscc: make clock-output configurable on vsc85xx   Tom Rini
• [PATCH 2/2] net: phy: mscc: sync rx/tx delay settings with Linux on vsc85xx   Tom Rini
• [PATCH] net: ftgmac100: Add support for board specific PHY interface address   Tom Rini
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Tom Rini
• [PATCH 1/3] net: tftp: Fix tftp_prev_block counter update   Tom Rini
• [PATCH 2/3] net: tftp: Fix store_block offset calculation   Tom Rini
• [PATCH 3/3] net: tftp: Fix load_block offset calculation   Tom Rini
• [PATCH] net: dwc_eth_qos: Convert to use APIs which support live DT   Tom Rini
• [PATCH 1/1] net: use log_err() for 'No ethernet found' message   Tom Rini
• [PATCH v4 1/3] net: add a generic udp protocol   Tom Rini
• [PATCHv4 2/3] sandbox: enable support of generic udp protocol   Tom Rini
• [PATCH v4 3/3] sntp: use udp framework   Tom Rini
• [PATCH v4 0/7] wdt: Add support for watchdogs on Kendryte K210   Sean Anderson
• Pinebook Pro keyboard (RK3399 OHCI)?   Simon South
• [PATCH v2] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support   Stefano Babic
• IMX8MM 4GiB boundary issue   Tim Harvey
• IMX8MM 4GiB boundary issue   Marek Vasut
• [v2, 00/16] Enable ARM Trusted Firmware for U-Boot   Michal Simek
• [PULL] u-boot-usb/next   Tom Rini
• [PULL] u-boot-usb/next   Marek Vasut
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Marek Vasut
• [PULL] u-boot-usb/next   Tom Rini
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Tom Rini
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Adam Ford
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Tom Rini
• [v2, 00/16] Enable ARM Trusted Firmware for U-Boot   Simon Glass
• [PULL] u-boot-usb/next   Marek Vasut
• [PATCH] ram: rockchip: px30: add a config-based ddr selection   Heiko Stuebner
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Adam Ford
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Marek Vasut
• [v2, 00/16] Enable ARM Trusted Firmware for U-Boot   Marek Vasut
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Tom Rini
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Marek Vasut
• [v2, 00/16] Enable ARM Trusted Firmware for U-Boot   Tom Rini
• [v2, 00/16] Enable ARM Trusted Firmware for U-Boot   Simon Glass
• [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] Please pull from u-boot-i2c for 2020.10   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PULL] u-boot-sh/next   Tom Rini
• [PATCH v1 02/16] arm: socfpga: soc64: Add FIT generator script for pack itb with ATF   Simon Glass
• [PATCH] ram: rockchip: px30: add a config-based ddr selection   Simon Glass
• [PATCH v1 02/16] arm: socfpga: soc64: Add FIT generator script for pack itb with ATF   Lim, Elly Siew Chin
• [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings   Andre Heider
• [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings   Andre Heider
• [PATCH] ram: rockchip: px30: add a config-based ddr selection   Heiko Stübner
• [PATCH v1 0/2] Fix kmeter1 support   Heiko Schocher
• [PATCH v1 1/2] mpc83xx: kmeter1_defconfig add missing BAT4 config   Heiko Schocher
• [PATCH v1 2/2] mpc83xx: kmeter1: increase malloc_f space   Heiko Schocher
• Pinebook Pro keyboard (RK3399 OHCI)?   Arnaud Patard (Rtp)
• Problems with large amount of partitions on SD   Mauro Condarelli
• [PATCH 1/2] pinctrl: meson-axg-pmx: fix gpio request   Neil Armstrong
• [PATCH 2/2] pinctrl: meson-axg: add missing GPIOA_18   Neil Armstrong
• [PATCH] ARM: dts: stm32: Add missing dm-spl props for SPI NOR on AV96   Patrick DELAUNAY
• [PATCH] pwm: Add driver for Amlogic Meson PWM controller   Neil Armstrong
• [PATCH 1/2] video: dw-mipi-dsi: driver-specific configuration of phy timings   Neil Armstrong
• [PATCH 2/2] video: dw-mipi-dsi: permit configuring the escape clock rate   Neil Armstrong
• [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Patrick DELAUNAY
• [PATCH] ram: rockchip: px30: add a config-based ddr selection   Heiko Stübner
• [PATCH v2 2/2] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrick DELAUNAY
• [PATCH 1/2] pinctrl: meson-axg-pmx: fix gpio request   Mark Kettenis
• [PATCH] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4   Patrice CHOTARD
• [PATCH v2 2/2] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrice CHOTARD
• [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Patrice CHOTARD
• [PATCH 1/2] gpio: stm32: cosmetic: cleanup gpio_stm32_probe   Patrice CHOTARD
• [PATCH 2/2] gpio: stm32: check result of ofnode_phandle_args   Patrice CHOTARD
• [PATCH 1/2] pinctrl: stm32: Convert to use APIs which support live DT   Patrice CHOTARD
• [PATCH 2/2] pinctrl: stm32: Add header with SPDX licence   Patrice CHOTARD
• [PATCH] mailbox: stm32_ipcc: Convert to use APIs which support live DT   Patrice CHOTARD
• [PATCH 1/2] video: stm32_ltdc: Convert to use APIs which support live DT   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/4] configs: stm32mp1: enable fastboot support of eMMC boot partition   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/4] configs: stm32mp1: enable the fastboot oem command format   Patrice CHOTARD
• [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses   Soeren Moch
• How to make u-boot verify script signature in FIT image   Andrii Voloshyn
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Pali Rohár
• [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses   Stefano Babic
• [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings   Pali Rohár
• IMX8MM 4GiB boundary issue   Peng Fan
• [Uboot-stm32] [PATCH 3/4] configs: stm32mp1: enable the fastboot oem command partconf   Patrice CHOTARD
• [Uboot-stm32] [PATCH 4/4] configs: stm32mp1: enable the fastboot oem command bootbus   Patrice CHOTARD
• [PATCH] stm32mp: limit size of cacheable DDR in pre-reloc stage   Patrice CHOTARD
• [PATCH] arm: stm32: cleanup arch gpio.h   Patrick Delaunay
• [PATCH] ARM: dts: stm32: Add missing dm-spl props for SPI NOR on AV96   Marek Vasut
• [PATCH] ARM: dts: stm32: Add missing dm-spl props for SPI NOR on AV96   Patrick DELAUNAY
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20201002   Patrick DELAUNAY
• [PATCH] arm64L: zynqmp: Add missing support for 9cg version   Michal Simek
• [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Add missing dm-spl props for SPI NOR on AV96   Marek Vasut
• [PATCH] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4   Patrick DELAUNAY
• [PATCH 1/2] video: stm32_ltdc: Convert to use APIs which support live DT   Patrick DELAUNAY
• [PATCH 2/2] video: stm32_dsi: Convert to use APIs which support live DT   Patrick DELAUNAY
• [PATCH] mailbox: stm32_ipcc: Convert to use APIs which support live DT   Patrick DELAUNAY
• [PATCH 1/2] pinctrl: stm32: Convert to use APIs which support live DT   Patrick DELAUNAY
• [PATCH 2/2] pinctrl: stm32: Add header with SPDX licence   Patrick DELAUNAY
• [PATCH 1/2] gpio: stm32: cosmetic: cleanup gpio_stm32_probe   Patrick DELAUNAY
• [PATCH 2/2] gpio: stm32: check result of ofnode_phandle_args   Patrick DELAUNAY
• [PATCH v2 0/4] x86: Updates to SMBIOS   Simon Glass
• [PATCH v2 1/4] x86: Pass an ofnode into each SMBIOS function   Simon Glass
• [PATCH v2 2/4] smbios: Allow properties to come from the device tree   Simon Glass
• [PATCH v2 3/4] smbios: Add more properties   Simon Glass
• [PATCH v2 4/4] smbios: Add documentation and devicetree binding   Simon Glass
• [PATCH] ram: rockchip: px30: add a config-based ddr selection   Jagan Teki
• [PATCH v2 4/4] smbios: Add documentation and devicetree binding   Heinrich Schuchardt
• [GIT PULL] u-boot-rpi/rpi-next to next   Matthias Brugger
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20201002   Tom Rini
• [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses   Tom Rini
• IMX8MM 4GiB boundary issue   Fabio Estevam
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Pali Rohár
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• [PATCH 0/4] efi_loader: fix EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• [PATCH 1/4] efi_loader: description EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• [PATCH 2/4] efi_loader: illegal free in EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• [PATCH 3/4] efi_selftest: enable printing hexadecimal numbers   Heinrich Schuchardt
• [PATCH 4/4] efi_selftest: print CRC32 of initrd as hexadecimal   Heinrich Schuchardt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ard Biesheuvel
• [PATCH 00/17] dm: test: Add unit tests for SPL   Simon Glass
• [PATCH 01/17] dtoc: Extract inner loop from output_node()   Simon Glass
• [PATCH 02/17] dtoc: Use a namedtuple for _links   Simon Glass
• [PATCH 03/17] dm: core: Expand the comment for DM_GET_DEVICE()   Simon Glass
• [PATCH 04/17] dm: core: Avoid void * in the of-platdata structs   Simon Glass
• [PATCH 05/17] dm: Avoid using #ifdef for CONFIG_OF_LIVE   Simon Glass
• [PATCH 06/17] dm: test: Sort the Makefile   Simon Glass
• [PATCH 07/17] dm: test: Update Makefile conditions   Simon Glass
• [PATCH 08/17] dm: test: Make use of CONFIG_UNIT_TEST   Simon Glass
• [PATCH 09/17] dm: test: Disable some tests that should not run in SPL   Simon Glass
• [PATCH 10/17] dm: test: Build tests for SPL   Simon Glass
• [PATCH 11/17] dm: test: Update the test runner to support of-platdata   Simon Glass
• [PATCH 12/17] dm: test: Add a way to run SPL tests   Simon Glass
• [PATCH 13/17] dm: test: Add a very simple of-platadata test   Simon Glass
• [PATCH 14/17] Makefile: Generate a symbol file for u-boot-spl   Simon Glass
• [PATCH 15/17] pytest: Collect SPL unit tests   Simon Glass
• [PATCH 16/17] test: Run SPL unit tests   Simon Glass
• [PATCH 17/17] Azure/GitLab/Travis: Add SPL unit tests   Simon Glass
• [PATCH v2 4/4] smbios: Add documentation and devicetree binding   Simon Glass
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ard Biesheuvel
• [PATCH 00/20] dm: Enhance of-platdata to support parent devices   Simon Glass
• [PATCH 01/20] sandbox: Drop ad-hoc device declarations in SPL   Simon Glass
• [PATCH 02/20] dtoc: Document the return value of scan_structs()   Simon Glass
• [PATCH 03/20] dtoc: Order the structures internally by name   Simon Glass
• [PATCH 04/20] dm: core: Allow dm_warn() to be used in SPL   Simon Glass
• [PATCH 05/20] dtoc: Fix widening of int to bytes   Simon Glass
• [PATCH 06/20] dm: Add a C test for of-platdata properties   Simon Glass
• [PATCH 07/20] sandbox: Allow selection of SPL unit tests   Simon Glass
• [PATCH 08/20] dm: test: Drop of-platdata pytest   Simon Glass
• [PATCH 09/20] dm: test: Add a check that all devices have a dev value   Simon Glass
• [PATCH 10/20] dm: test: Add a test for of-platdata phandles   Simon Glass
• [PATCH 11/20] dm: Use an allocated array for run-time device info   Simon Glass
• [PATCH 12/20] sandbox: Fix up building for of-platdata   Simon Glass
• [PATCH 13/20] dm: Support parent devices with of-platdata   Simon Glass
• [PATCH 14/20] dm: Add a test for of-platdata parent information   Simon Glass
• [PATCH 15/20] dm: core: Convert #ifdef to if() in root.c   Simon Glass
• [PATCH 16/20] x86: apl: Enable SPI flash in TPL with APL_SPI_FLASH_BOOT   Simon Glass
• [PATCH 17/20] x86: apl: Take advantage of the of-platdata parent support   Simon Glass
• [PATCH 18/20] dm: Use driver_info index instead of pointer   Simon Glass
• [PATCH 19/20] dm: Don't allow U_BOOT_DEVICE() when of-platdata is used   Simon Glass
• [PATCH 20/20] dm: doc: Update the of-platadata documentation   Simon Glass
• [PATCH v2 4/4] smbios: Add documentation and devicetree binding   Heinrich Schuchardt
• [PATCH v4 1/2] arm: rmobile: Add PRR CPU ID macros for RZ/G2[HMNE]   Marek Vasut
• [PATCH v2] spi: renesas_rpc_spi: Add R-Car Gen3 and RZ/G2 fallback compatibility string   Marek Vasut
• [PATCH] clk: renesas: r8a774a1-cpg-mssr: Add R8A774A1 RPC clock   Marek Vasut
• [PATCH v4 1/2] arm: rmobile: Add PRR CPU ID macros for RZ/G2[HMNE]   Biju Das
• [PATCH v2] spi: renesas_rpc_spi: Add R-Car Gen3 and RZ/G2 fallback compatibility string   Biju Das
• [PATCH v2 4/4] smbios: Add documentation and devicetree binding   Simon Glass
• [PATCH 1/4] efi_loader: description EFI_LOAD_FILE2_PROTOCOL   Ilias Apalodimas
• [PATCH 2/4] efi_loader: illegal free in EFI_LOAD_FILE2_PROTOCOL   Ilias Apalodimas
• [PATCH 4/4] efi_selftest: print CRC32 of initrd as hexadecimal   Ilias Apalodimas
• [PATCH 2/2] am335x_evm: Allow booting from usb-storage device   Matwey V. Kornilov
• [PATCH v4 1/2] arm: rmobile: Add PRR CPU ID macros for RZ/G2[HMNE]   Marek Vasut
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH v4 1/2] arm: rmobile: Add PRR CPU ID macros for RZ/G2[HMNE]   Biju Das
• [PATCH v4 1/2] arm: rmobile: Add PRR CPU ID macros for RZ/G2[HMNE]   Marek Vasut
• [PATCH 0/3] riscv: Move timers into drivers/timer   Sean Anderson
• [PATCH 1/3] riscv: Move Andes PLMT driver to drivers/timer   Sean Anderson
• [PATCH 2/3] timer: Add _TIMER suffix to Andes PLMT Kconfig   Sean Anderson
• [PATCH 3/3] riscv: Move timer portions of SiFive CLINT to drivers/timer   Sean Anderson
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Cristian Ciocaltea
• SPL Load Over JTAG DDR Initialization Failing   charles
• [PATCH 00/16] dm: Remove redefinitions of dev_xxx macros   Sean Anderson
• [PATCH 01/16] clk: sifive: Include device_compat.h   Sean Anderson
• [PATCH 02/16] dm: syscon: Set LOG_CATEGORY   Sean Anderson
• [PATCH 03/16] firmware: scmi: Include device_compat.h   Sean Anderson
• [PATCH 04/16] mtd: mxs_nand: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH 05/16] net: ldpaa_eth: Include device_compat.h   Sean Anderson
• [PATCH 06/16] phy: Include device_compat.h   Sean Anderson
• [PATCH 07/16] ram: imxrt: Include device_compat.h   Sean Anderson
• [PATCH 08/16] spi: nsp_fspi: Include device_compat.h   Sean Anderson
• [PATCH 09/16] spi: fsl_qspi: Include device_compat.h   Sean Anderson
• [PATCH 10/16] tee: optee: Include device_compat.h   Sean Anderson
• [PATCH 11/16] timer: Include device_compat.h   Sean Anderson
• [PATCH 12/16] usb: xhci: Include device_compat.h   Sean Anderson
• [PATCH 13/16] usb: musb-new: Include device_compat.h   Sean Anderson
• [PATCH 14/16] usb: musb-new: mt85xx: Fix not calling dev_err with a device   Sean Anderson
• [PATCH 15/16] linux/compat.h: Remove redefinition of dev_xxx macros   Sean Anderson
• [PATCH 16/16] dm: Don't undefine dev_xxx macros   Sean Anderson
• [PATCH 1/1] sandbox: avoid duplicate backslash input   Simon Glass
• [PATCH 1/1] sandbox: make SDL window resizable   Simon Glass
• [PATCH 1/2] log: allow for message continuation   Simon Glass
• [PATCH 1/3] dm: add cells_count parameter in *_count_phandle_with_args   Simon Glass
• [PATCH 2/3] fdtdec: correct test on return of fdt_node_offset_by_phandle   Simon Glass
• [PATCH 3/3] test: dm: add test for phandle access functions   Simon Glass
• [PATCH 1/1] sandbox: add missing SDL key scan codes   Simon Glass
• [PATCH 1/2] treewide: Fix wrong CONFIG_IS_ENABLED() handling   Simon Glass
• [PATCH 2/2] checkpatch.pl: Make CONFIG_IS_ENABLED(CONFIG_*) an error   Simon Glass
• [PATCH 1/3] configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs   Simon Glass
• [PATCH 2/3] configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs   Simon Glass
• [PATCH 3/3] configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs   Simon Glass
• STM32MP1: Adding TF-A causes kernel errors   Jan Kiszka
• [PATCH v3 0/3] doc: global data pointer   Heinrich Schuchardt
• [PATCH v3 1/3] global_data.h: convert GD_FLG_* to enum   Heinrich Schuchardt
• [PATCH v3 2/3] global_data.h: add Sphinx documentation   Heinrich Schuchardt
• [PATCH v3 3/3] doc: global data pointer   Heinrich Schuchardt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ilias Apalodimas
• [PATCH v2 1/2] treewide: Fix wrong CONFIG_IS_ENABLED() handling   Alper Nebi Yasak
• [PATCH v2 2/2] checkpatch.pl: Make CONFIG_IS_ENABLED(CONFIG_*) an error   Alper Nebi Yasak
• [PATCH v2] usb: dwc2: Fix contorl OUT transfer issue   Chance.Yang
• [PATCH v2] cpu: at91: add driver for CPU   Eugen.Hristev at microchip.com
• [PATCH v2] ARM: zynq: Add Z-turn board V5   Michal Simek
• [PULL] Pull request for u-boot-stm/next = u-boot-stm32-20201003   Patrick DELAUNAY
• [PATCH v2 0/2] Add support for loading images above 4GB   Michal Simek
• [PATCH v2 1/2] spl: Use standard FIT entries   Michal Simek
• [PATCH v2 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Michal Simek
• [PATCH 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Michal Simek
• [PATCH 0/2] Add support for loading images above 4GB   Michal Simek
• [PATCH v2] ARM: stm32: Use firmware property instead of loadables   Michal Simek
• [EXT] [PATCH 08/16] spi: nsp_fspi: Include device_compat.h   Kuldeep Singh
• [PATCH] arm: mvebu: Remove old comments from configs/mvebu_armada-37xx.h file   Pali Rohár
• [PATCH v2 1/1] log: mute messages generated by log drivers   Heinrich Schuchardt
• [PATCH v2 1/1] log: mute messages generated by log drivers   Heinrich Schuchardt
• [PATCH v2 1/1] log: mute messages generated by log drivers   Simon Glass
• [PATCH v2 2/2] checkpatch.pl: Make CONFIG_IS_ENABLED(CONFIG_*) an error   Simon Glass
• [PATCH 1/2] cros_ec: Fix up driver names to avoid dtoc warnings   Simon Glass
• [PATCH 2/2] x86: Fix up driver names to avoid dtoc warnings   Simon Glass
• [PULL] u-boot-atmel-2021.01-a   Eugen.Hristev at microchip.com
• [GIT PULL] u-boot-rpi/rpi-next to next   Tom Rini
• [PATCH 0/3] DM_ETH v mpc83xx fixups   Rasmus Villemoes
• [PATCH 1/3] mdio-uclass.c: support fixed-link subnodes   Rasmus Villemoes
• [PATCH 2/3] dm_qe_uec.c: fix indentation in uec_set_mac_if_mode()   Rasmus Villemoes
• [PATCH 3/3] uec.h: fix COFIG_DM typo   Rasmus Villemoes
• verified boot changes since 2020.04   Rasmus Villemoes
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• [PATCH 0/7] add SAM9X60 clock support   Claudiu Beznea
• [PATCH 1/7] board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR   Claudiu Beznea
• [PATCH 2/7] clk: at91: sam9x60: add support compatible with CCF   Claudiu Beznea
• [PATCH 3/7] ARM: dts: sam9x60ek: add clock frequencies to board file   Claudiu Beznea
• [PATCH 4/7] ARM: dts: sam9x60: use u-boot,dm-pre-reloc   Claudiu Beznea
• [PATCH 5/7] ARM: dts: sam9x60: use slow clock CCF compatible bindings   Claudiu Beznea
• [PATCH 6/7] ARM: dts: sam9x60: use CCF compatibles for PMC   Claudiu Beznea
• [PATCH 7/7] configs: sam9x60ek: update defconfigs for CCF   Claudiu Beznea
• [ANN] U-Boot v2020.10 released   Tom Rini
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Daniel Thompson
• [PATCH 1/2] pinctrl: meson-axg-pmx: fix gpio request   Neil Armstrong
• [PATCH] pwm: Add driver for Amlogic Meson PWM controller   Neil Armstrong
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PULL] Pull request for u-boot-stm/next = u-boot-stm32-20201003   Tom Rini
• [PULL] u-boot-atmel-2021.01-a   Tom Rini
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• [PATCH v2] usb: dwc2: Fix contorl OUT transfer issue   Marek Vasut
• [PATCH 0/2] mtd: cfi_mtd: Add DMA support for reads   Vignesh Raghavendra
• [PATCH 15/17] pytest: Collect SPL unit tests   Stephen Warren
• [PATCH 15/17] pytest: Collect SPL unit tests   Simon Glass
• "next" now merged to master   Tom Rini
• [PATCH 1/1] sandbox: avoid duplicate backslash input   Simon Glass
• [PATCH 1/1] sandbox: add missing SDL key scan codes   Simon Glass
• [PATCH 3/3] test: dm: add test for phandle access functions   Simon Glass
• [PATCH 2/3] fdtdec: correct test on return of fdt_node_offset_by_phandle   Simon Glass
• [PATCH] dm: update test on of_offset in ofnode_valid   Simon Glass
• [PATCH] dm: ofnode: Fix compile breakage with OF_CHECKS enabled   Simon Glass
• [PATCH 5/5] bloblist: Fix up a few comments   Simon Glass
• [PATCH 4/5] bloblist: Allow custom alignment for blobs   Simon Glass
• [PATCH 3/5] bloblist: Tidy up the data alignment   Simon Glass
• [PATCH 2/5] bloblist: Compare addresses rather than pointers in tests   Simon Glass
• [PATCH 1/5] bloblist: Add a command   Simon Glass
• [PATCH 1/1] doc/arch/sandbox.rst: reformat command line options   Simon Glass
• [PATCH 1/1] MAINTAINERS: assign doc/arch/sandbox.rst   Simon Glass
• [PATCH 15/17] pytest: Collect SPL unit tests   Stephen Warren
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Grant Likely
• [PATCH v2 1/5] i2c: mediatek: add basic driver support   Simon Glass
• [PATCH v3] usb: dwc2: Fix control OUT transfer issue   Chance.Yang
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• [PATCH 3/5] bloblist: Tidy up the data alignment   Rasmus Villemoes
• [PATCH 1/3] mdio-uclass.c: support fixed-link subnodes   Heiko Schocher
• [PATCH 2/3] dm_qe_uec.c: fix indentation in uec_set_mac_if_mode()   Heiko Schocher
• [PATCH 3/3] uec.h: fix COFIG_DM typo   Heiko Schocher
• [PATCH 0/3] DM_ETH v mpc83xx fixups   Heiko Schocher
• [PATCH 1/3] mdio-uclass.c: support fixed-link subnodes   Rasmus Villemoes
• [PATCH 2/7] clk: at91: sam9x60: add support compatible with CCF   Eugen.Hristev at microchip.com
• [PATCH 1/1] Create codeql-analysis.yml   Heinrich Schuchardt
• [PATCH 4/7] ARM: dts: sam9x60: use u-boot,dm-pre-reloc   Eugen.Hristev at microchip.com
• [PATCH v3] usb: dwc2: Fix control OUT transfer issue   Marek Vasut
• [PULL u-boot] Please pull u-boot-amlogic-20201005   Neil Armstrong
• [PATCH 4/7] ARM: dts: sam9x60: use u-boot,dm-pre-reloc   Claudiu.Beznea at microchip.com
• [PATCH 2/7] clk: at91: sam9x60: add support compatible with CCF   Claudiu.Beznea at microchip.com
• [PATCH 4/7] ARM: dts: sam9x60: use u-boot,dm-pre-reloc   Eugen.Hristev at microchip.com
• [PATCH 2/7] clk: at91: sam9x60: add support compatible with CCF   Eugen.Hristev at microchip.com
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ard Biesheuvel
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ard Biesheuvel
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Daniel Thompson
• [PATCH 0/1] fix verified boot on BE hosts   Rasmus Villemoes
• [PATCH 1/1] rsa: fix retrieving public exponent on big-endian systems   Rasmus Villemoes
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• Pull request for UEFI sub-system for efi-2021-01-rc1   Heinrich Schuchardt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ard Biesheuvel
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Grant Likely
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Pali Rohár
• [PATCH] MAINTAINERS: Add STM32MP1 RNG driver in stm32mp platform   Patrick Delaunay
• [PATCH] MAINTAINERS: Add stm32 and stm regexp for ARM STM STM32MP platform   Patrick Delaunay
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Grant Likely
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ilias Apalodimas
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Grant Likely
• [PATCH 1/3] arm: renesas: Add config option for R8A774B1 SoC   Biju Das
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Grant Likely
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Grant Likely
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Heinrich Schuchardt
• [PATCH] net: e1000: add defaults for i210 TX/RX PBSIZE   Christian Gmeiner
• [PATCH v2] net: e1000: add defaults for i210 TX/RX PBSIZE   Christian Gmeiner
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• [PATCH 1/1] Create codeql-analysis.yml   Tom Rini
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ard Biesheuvel
• efi_loader: fix free() before use in RX path   Patrick Wildt
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• Fit images and EFI_LOAD_FILE2_PROTOCOL   François Ozog
• [PATCH] doc: Sphinx.override_domain() deprecated   Heinrich Schuchardt
• [PATCH v2] doc: Sphinx.override_domain() deprecated   Heinrich Schuchardt
• efi_loader: fix free() before use in RX path   Patrick Wildt
• [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick Delaunay
• [PATCH 1/7] lmb: Add support of flags for no-map properties   Patrick Delaunay
• [PATCH 2/7] lmb: add lmb_is_reserved_flags   Patrick Delaunay
• [PATCH 3/7] lmb: remove lmb_region.size   Patrick Delaunay
• [PATCH 4/7] lmb: add lmb_dump_region() function   Patrick Delaunay
• [PATCH 5/7] test: lmb: add test for lmb_reserve_flags   Patrick Delaunay
• [PATCH 6/7] image-fdt: save no-map parameter of reserve-memory   Patrick Delaunay
• [PATCH 7/7] arm: cache: cp15: don't map the reserved region with no-map property   Patrick Delaunay
• Please pull u-boot-dm   Simon Glass
• Fit images and EFI_LOAD_FILE2_PROTOCOL   Ard Biesheuvel
• [PULL u-boot] Please pull u-boot-amlogic-20201005   Tom Rini
• Pull request for UEFI sub-system for efi-2021-01-rc1   Tom Rini
• [PATCH 0/5] configs: ti: am65x/j721e: Use DEFAULT_LINUX_BOOT_ENV   Nishanth Menon
• [PATCH 1/5] configs: am65x_evm: Use DEFAULT_LINUX_BOOT_ENV   Nishanth Menon
• [PATCH 2/5] configs: j721e_evm: Use DEFAULT_LINUX_BOOT_ENV   Nishanth Menon
• [PATCH 3/5] env: ti: ufs: Use dtboaddr instead of overlayaddr   Nishanth Menon
• [PATCH 4/5] configs: am65x_evm: Get rid of overlayaddr   Nishanth Menon
• [PATCH 5/5] configs: j721e_evm: Get rid of overlayaddr   Nishanth Menon
• [PATCH 00/18] log: Add commands for manipulating filters   Sean Anderson
• [PATCH 01/18] log: Fix missing negation of ENOMEM   Sean Anderson
• [PATCH 02/18] log: Fix incorrect documentation of log_filter.cat_list   Sean Anderson
• [PATCH 03/18] log: Add new category names to log_cat_name   Sean Anderson
• [PATCH 04/18] log: Use CONFIG_IS_ENABLED() for LOG_TEST   Sean Anderson
• [PATCH 05/18] log: Expose log_device_find_by_name   Sean Anderson
• [PATCH 06/18] log: Add function to create a filter with flags   Sean Anderson
• [PATCH 07/18] log: Add filter flag to deny on match   Sean Anderson
• [PATCH 08/18] test: Add tests for LOGFF_DENY   Sean Anderson
• [PATCH 09/18] log: Add filter flag to match greater than a log level   Sean Anderson
• [PATCH 10/18] test: Add test for LOGFF_MIN   Sean Anderson
• [PATCH 11/18] cmd: log: Use sub-commands for log   Sean Anderson
• [PATCH 12/18] cmd: log: Split off log level parsing   Sean Anderson
• [PATCH 13/18] lib: Add getopt   Sean Anderson
• [PATCH 14/18] test: Add a test for getopt   Sean Anderson
• [PATCH 15/18] cmd: log: Add commands to manipulate filters   Sean Anderson
• [PATCH 16/18] test: py: Add a test for log filter-*   Sean Anderson
• [PATCH 17/18] doc: Add log kerneldocs to documentation   Sean Anderson
• [PATCH 18/18] doc: Update logging documentation   Sean Anderson
• efi_loader: fix free() before use in RX path   Heinrich Schuchardt
• [PATCH 18/18] doc: Update logging documentation   Heinrich Schuchardt
• [PATCH 01/18] log: Fix missing negation of ENOMEM   Heinrich Schuchardt
• [PATCH 18/18] doc: Update logging documentation   Sean Anderson
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Alper Nebi Yasak
• [PATCH 02/18] log: Fix incorrect documentation of log_filter.cat_list   Heinrich Schuchardt
• [PATCH 03/18] log: Add new category names to log_cat_name   Heinrich Schuchardt
• [PATCH 15/18] cmd: log: Add commands to manipulate filters   Heinrich Schuchardt
• [PATCH 18/18] doc: Update logging documentation   Heinrich Schuchardt
• [PATCH 15/18] cmd: log: Add commands to manipulate filters   Sean Anderson
• [PATCH 18/18] doc: Update logging documentation   Sean Anderson
• [PATCH 1/1] rsa: fix retrieving public exponent on big-endian systems   Simon Glass
• [PATCH 3/5] bloblist: Tidy up the data alignment   Simon Glass
• [PATCH 15/18] cmd: log: Add commands to manipulate filters   Simon Glass
• [PATCH 15/18] cmd: log: Add commands to manipulate filters   Sean Anderson
• [PATCH 16/18] test: py: Add a test for log filter-*   Simon Glass
• [PATCH 16/18] test: py: Add a test for log filter-*   Sean Anderson
• [PATCH 1/1] efi_loader: separate device-tree handling   Heinrich Schuchardt
• [PATCH 1/1] rsa: fix retrieving public exponent on big-endian systems   Rasmus Villemoes
• efi_loader: fix free() before use in RX path   Patrick Wildt
• [PATCH] efi_loader: fix use after free in receive path   Patrick Wildt
• [PATCH] efi_loader: fix use after free in receive path   Heinrich Schuchardt
• [PATCH] efi_loader: fix use after free in receive path   Patrick Wildt
• [PATCH v2 1/2] net: add a define for the number of packets received as batch   Patrick Wildt
• [PATCH v2 2/2] efi_loader: fix use after free in receive path   Patrick Wildt
• [PATCH 0/3] mkimage: modify show_valid_options for usability   Naoki Hayama
• [PATCH 1/3] image: Add a function to modify category information   Naoki Hayama
• [PATCH 2/3] mkimage: Skip adding non-existent IDs to a list   Naoki Hayama
• [PATCH 3/3] cosmetic: image: Fix comments and the order of definitions   Naoki Hayama
• Pre-built (and tested) images   Naoki Hayama
• [PATCH 0/2] mtd: cfi_mtd: Add DMA support for reads   Stefan Roese
• [PATCH] arm: mvebu: Remove old comments from configs/mvebu_armada-37xx.h file   Stefan Roese
• [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings   Stefan Roese
• [PATCH] dm: ofnode: Fix compile breakage with OF_CHECKS enabled   Stefan Roese
• [PATCH 0/5] configs: ti: am65x/j721e: Use DEFAULT_LINUX_BOOT_ENV   Lokesh Vutla
• [PATCH] common, autoboot: sync functionality with Kconfig description   Heiko Schocher
• [PATCH 1/1] efi_loader: separate device-tree handling   AKASHI Takahiro
• [PATCH v2 0/3] allow positional arguments with "run"   Rasmus Villemoes
• [PATCH v2 1/3] cli_hush.c: refactor handle_dollar() to prepare for "run with arguments"   Rasmus Villemoes
• [PATCH v2 2/3] allow positional arguments with "run" command   Rasmus Villemoes
• [PATCH v2 3/3] ut: add small hush tests   Rasmus Villemoes
• [PATCH] cli_hush.c: remove broken sanity check   Rasmus Villemoes
• [PATCH] arm64: versal: Update mini u-boot eMMC node parameters   Michal Simek
• [PATCH] config: versal: Update mini u-boot timer clock to 100Mhz   Michal Simek
• [PATCH] configs: stm32mp: force empty PREBOOT   Patrick Delaunay
• [PATCH] Define default CONFIG_PREBOOT with right config option   Patrick DELAUNAY
• [PATCH v3 1/2] net: add a define for the number of packets received as batch   Patrick Wildt
• [PATCH v3 2/2] efi_loader: fix use after free in receive path   Patrick Wildt
• [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH v3 1/2] net: add a define for the number of packets received as batch   Heinrich Schuchardt
• [PATCH 1/2] mx7ulp: clock: Remove unuseful information   Fabio Estevam
• [PATCH 2/2] mx7ulp: clock: Align the PLL_USB frequency   Fabio Estevam
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ahmad Fatoum
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ahmad Fatoum
• [PATCH 0/5] configs: ti: am65x/j721e: Use DEFAULT_LINUX_BOOT_ENV   Nishanth Menon
• [PATCH v2 1/2] smbios: add parsing API   Christian Gmeiner
• [PATCH v2 2/2] coreboot: make use of smbios parser   Christian Gmeiner
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH v3 2/2] efi_loader: fix use after free in receive path   Heinrich Schuchardt
• [PATCH 06/10] ram: Add driver for K210 SRAM   Simon Glass
• [PATCH] Define default CONFIG_PREBOOT with right config option   Simon Glass
• [PATCH] Makefile: Fix u-boot-nodtb.bin target   Pali Rohár
• [PATCH 0/4] arm64: zynqmp: Enable loading FPGA by SPL   Michal Simek
• [PATCH 1/4] firmware: zynqmp: Swap addr_hi/low when PM_FPGA_LOAD is called   Michal Simek
• [PATCH 2/4] mailbox: zynqmp: Extend timeout for getting observation bit   Michal Simek
• [PATCH 3/4] arm64: zynqmp: Get rid of simple_itoa and replace it by snprintf   Michal Simek
• [PATCH 4/4] arm64: zynqmp: Enable FPGA loading from SPL   Michal Simek
• [PATCH] arm64: zynqmp: Enable cache command   Michal Simek
• [PATCH] km: fix license string and compatible strings   Holger Brunck
• [PATCH v2 0/8] add SAM9X60 clock support   Claudiu Beznea
• [PATCH v2 1/8] board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR   Claudiu Beznea
• [PATCH v2 2/8] clk: at91: sam9x60: add support compatible with CCF   Claudiu Beznea
• [PATCH v2 3/8] ARM: dts: sam9x60ek: add clock frequencies to board file   Claudiu Beznea
• [PATCH v2 4/8] ARM: dts: sam9x60: use u-boot,dm-pre-reloc   Claudiu Beznea
• [PATCH v2 5/8] ARM: dts: sam9x60: use slow clock CCF compatible bindings   Claudiu Beznea
• [PATCH v2 6/8] ARM: dts: sam9x60: use CCF compatibles for PMC   Claudiu Beznea
• [PATCH v2 7/8] configs: sam9x60ek: update defconfigs for CCF   Claudiu Beznea
• [PATCH v2 8/8] ARM: dts: sam9x60: use alphabetical order   Claudiu Beznea
• Pre-built (and tested) images   Wolfgang Denk
• [PATCH] arm64: zynqmp: Get rid of iommus/power-domains properties for SPL DT   Michal Simek
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [PATCH 1/2] km: adapt defines and variables for new memory layout   Holger Brunck
• [PATCH 2/2] km/common: change ubicopy variable   Holger Brunck
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [PATCH v3 0/8] add SAM9X60 clock support   Claudiu Beznea
• [PATCH v3 1/8] board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR   Claudiu Beznea
• [PATCH v3 2/8] clk: at91: sam9x60: add support compatible with CCF   Claudiu Beznea
• [PATCH v3 3/8] ARM: dts: sam9x60ek: add clock frequencies to board file   Claudiu Beznea
• [PATCH v3 4/8] ARM: dts: sam9x60: use u-boot,dm-pre-reloc   Claudiu Beznea
• [PATCH v3 5/8] ARM: dts: sam9x60: use slow clock CCF compatible bindings   Claudiu Beznea
• [PATCH v3 6/8] ARM: dts: sam9x60: use CCF compatibles for PMC   Claudiu Beznea
• [PATCH v3 7/8] configs: sam9x60ek: update defconfigs for CCF   Claudiu Beznea
• [PATCH v3 8/8] ARM: dts: sam9x60: use alphabetical order   Claudiu Beznea
• cannot build uboot for Coral board. Missing spl/u-boot-spl-ddr.bin   Dennis C
• [PATCH] Define default CONFIG_PREBOOT with right config option   Tom Rini
• [PATCH] km: fix license string and compatible strings   Tom Rini
• [PATCH 1/1] common: rename getc() to getchar()   Heinrich Schuchardt
• [PATCH] timer: mchp-pit64b: add support for pit64b   Sean Anderson
• [PATCH v2 0/2] timer: Return a u64 directly   Sean Anderson
• [PATCH v2 1/2] doc: Document timer API   Sean Anderson
• [PATCH v2 2/2] timer: Return count from timer_ops.get_count   Sean Anderson
• [PATCH v6 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PULL] u-boot-mips   Daniel Schwierzeck
• Please pull u-boot-dm   Tom Rini
• [PATCH 1/1] common: rename getc() to getchar()   Tom Rini
• [PATCH 1/1] common: rename getc() to getchar()   Simon Glass
• [fs/squashfs PATCH v3 0/2] fs/squashfs: avoid 64-bit divisions on 32-bit   Mauro Condarelli
• [fs/squashfs PATCH v3 1/2] Add warning for dynamic memory usage.   Mauro Condarelli
• [fs/squashfs PATCH v3 2/2] avoid 64-bit divisions on 32-bit   Mauro Condarelli
• Pre-built (and tested) images   Naoki Hayama
• [PATCH 0/2] Refactor AST2500 reset control   ChiaWei Wang
• [PATCH V2 0/4] configs: ti: am65x/j721e: Use DEFAULT_LINUX_BOOT_ENV   Nishanth Menon
• [PATCH V2 1/4] configs: j721e_evm: Use DEFAULT_LINUX_BOOT_ENV   Nishanth Menon
• [PATCH V2 2/4] env: ti: ufs: Use dtboaddr instead of overlayaddr   Nishanth Menon
• [PATCH V2 3/4] configs: j721e_evm: Get rid of overlayaddr   Nishanth Menon
• [PATCH V2 4/4] configs: am65x_evm: Use DEFAULT_LINUX_BOOT_ENV and remove overlayaddr   Nishanth Menon
• [PATCH 0/5] configs: ti: am65x/j721e: Use DEFAULT_LINUX_BOOT_ENV   Nishanth Menon
• [PATCH] km: fix license string and compatible strings   Heiko Schocher
• [PATCH 1/2] km: adapt defines and variables for new memory layout   Heiko Schocher
• [PATCH 2/2] km/common: change ubicopy variable   Heiko Schocher
• [PATCH] km: fix license string and compatible strings   Heiko Schocher
• [PATCH 0/6] README: update pieces of information   Naoki Hayama
• [PATCH 1/6] README: Update links to mailing list archives   Naoki Hayama
• [PATCH 2/6] README: Update source code location   Naoki Hayama
• [PATCH 3/6] README: Update directory hierarchy   Naoki Hayama
• [PATCH 4/6] README: sandbox: Change reference to sandbox details   Naoki Hayama
• [PATCH 5/6] README: vxworks: Fix typo overwride   Naoki Hayama
• [PATCH 6/6] README: Convert HTTP links to HTTPS   Naoki Hayama
• [PATCH 00/17] Add support for MMC higher speed modes for TI's am65x, j721e and j7200 platforms   Faiz Abbas
• [PATCH 01/17] mmc: sdhci: Add helper functions for UHS modes   Faiz Abbas
• [PATCH 02/17] mmc: am654_sdhci: Unconditionally switch off DLL in the beginning of ios_post()   Faiz Abbas
• [PATCH 03/17] mmc: am654_sdhci: Convert flag fields to BIT macro   Faiz Abbas
• [PATCH 04/17] mmc: am654_sdhci: Add flag for PHY calibration   Faiz Abbas
• [PATCH 05/17] mmc: am654_sdhci: Add support for AM65x SR2.0   Faiz Abbas
• [PATCH 06/17] mmc: am654_sdhci: Add support for input tap delay   Faiz Abbas
• [PATCH 07/17] mmc: am654_sdhci: Add support for writing to clkbuf_sel   Faiz Abbas
• [PATCH 08/17] mmc: am654_sdhci: Add support for software tuning   Faiz Abbas
• [PATCH 09/17] mmc: am654_sdhci: Fix HISPD bit configuration in some lower speed modes   Faiz Abbas
• [PATCH 10/17] mmc: am654_sdhci: Use sdhci_set_control_reg()   Faiz Abbas
• [PATCH 11/17] arm: dts: k3-am65: Fix mmc nodes   Faiz Abbas
• [PATCH 12/17] arm: dts: k3-j721e-main: Update otap-delay values   Faiz Abbas
• [PATCH 13/17] arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card   Faiz Abbas
• [PATCH 14/17] arm: dts: k3-j7200-main: Add support for gpio0   Faiz Abbas
• [PATCH 15/17] arm: dts: k3-j7200-common-proc-board: Enable support for UHS modes   Faiz Abbas
• [PATCH 16/17] configs: j721e_evm: Add support for UHS modes   Faiz Abbas
• [PATCH 17/17] configs: j7200_evm: Add support for UHS modes   Faiz Abbas
• [PATCH v4 1/2] arm: rmobile: Add PRR CPU ID macros for RZ/G2[HMNE]   Biju Das
• [PATCH v2] cfi_flash: Fix devicetree address determination   Stefan Roese
• [PATCH 1/2] dma: Reduce error level when DMA channel type does not exist   Stefan Roese
• [PATCH 2/2] mtd: cfi_mtd: Use DMA for reads   Stefan Roese
• [fs/squashfs PATCH v3 1/2] Add warning for dynamic memory usage.   Miquel Raynal
• [fs/squashfs PATCH v3 2/2] avoid 64-bit divisions on 32-bit   Miquel Raynal
• [fs/squashfs PATCH v3 2/2] avoid 64-bit divisions on 32-bit   Thomas Petazzoni
• [fs/squashfs PATCH v3 2/2] avoid 64-bit divisions on 32-bit   Mauro Condarelli
• [PATCH] timer: mchp-pit64b: add support for pit64b   Claudiu.Beznea at microchip.com
• [PATCH v2 2/2] timer: Return count from timer_ops.get_count   Claudiu.Beznea at microchip.com
• [PATCH v2] cfi_flash: Fix devicetree address determination   Heinrich Schuchardt
• [PATCH] km: fix license string and compatible strings   Holger Brunck
• [PATCH 1/2] km: adapt defines and variables for new memory layout   Holger Brunck
• [PATCH v5 1/2] arm: rmobile: Add RZ/G2[HMNE] SoC support   Biju Das
• [PATCH v5 2/2] mmc: renesas-sdhi: Add R8A774A1 SDHI quirks   Biju Das
• cache: Misaligned operation at range   Shlomi Vaknin
• [PATCH] phy: omap-usb2-phy: Drop usage of "ti, dis-chg-det-quirk" DT property   Vignesh Raghavendra
• [PATCH 1/1] sandbox: make SDL window resizable   Heinrich Schuchardt
• [PATCH v2] cfi_flash: Fix devicetree address determination   Stefan Roese
• Please pull u-boot-cfi-flash/master   Stefan Roese
• [PATCH v2] cfi_flash: Fix devicetree address determination   Heinrich Schuchardt
• [PATCH v2] km: fix license string and compatible strings   Holger Brunck
• [PATCH v2] cfi_flash: Fix devicetree address determination   André Przywara
• [PATCH v2] cfi_flash: Fix devicetree address determination   Stefan Roese
• [PATCH 1/2] clk: at91: clk-master: add 5th divisor for mck master   Eugen Hristev
• [PATCH 2/2] clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics   Eugen Hristev
• [PATCH] ARM: at91: Add chip ID for SAM9X60 SiP   Eugen Hristev
• [PATCH v3 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties   Heinrich Schuchardt
• [PATCH] net: ks8851: Implement EEPROM MAC address readout   Marek Vasut
• [PATCH] ARM: dts: stm32: Do not set eth1addr if KS8851 has EEPROM   Marek Vasut
• [PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties   André Przywara
• [PATCH] configs: stm32mp: force empty PREBOOT   Tom Rini
• [PATCH 0/2] Refactor AST2500 reset control   Tom Rini
• [PATCH v2] km: fix license string and compatible strings   Tom Rini
• Please pull u-boot-cfi-flash/master   Tom Rini
• [PULL] u-boot-mips   Tom Rini
• Something doesn't make sense with SPL_FIT and SPL_LOAD_FIT   Alex G.
• [PATCH] env: sf: add support for env erase   Harry Waschkeit
• [PATCH] tools: image-host.c: use correct output format   Heinrich Schuchardt
• [PATCH 1/1] lib: rsa: superfluous initialization in rsa_verify()   Heinrich Schuchardt
• [PATCH 0/6] IPQ40xx: Improve support   Robert Marko
• [PATCH 1/6] spi: Add Qualcomm QUP SPI controller driver   Robert Marko
• [PATCH 2/6] IPQ40xx: Add SPI support   Robert Marko
• [PATCH 3/6] net: Add IPQ40xx MDIO driver   Robert Marko
• [PATCH 4/6] IPQ40xx: Add support for MDIO   Robert Marko
• [PATCH 5/6] rng: Add Qualcomm MSM PRNG driver   Robert Marko
• [PATCH 6/6] IPQ40xx: Add PRNG support   Robert Marko
• [PATCH 0/2] lib: print_freq() should output kHz not KHz   Heinrich Schuchardt
• [PATCH 1/2] lib: print_freq() should output kHz not KHz   Heinrich Schuchardt
• [PATCH 2/2] test: unit tests for print_freq(), print_size()   Heinrich Schuchardt
• [PATCH 2/2] test: unit tests for print_freq(), print_size()   Sean Anderson
• [PATCH 1/2] lib: print_freq() should output kHz not KHz   Stefan Roese
• Collecting U-Boot Testresults: was: [ANN] U-Boot v2020.10 released   Heiko Schocher
• [Patch v2] armv8: dts: fsl-lx2162a: add dspi node into qds dts   Qiang Zhao
• [PATCH 0/2] Add OpenCores I2C controller driver   Pragnesh Patel
• [PATCH 1/2] i2c: ocores: add i2c driver for OpenCores I2C controller   Pragnesh Patel
• [PATCH 2/2] riscv: sifive/fu540: kconfig: Enable support for Opencores I2C controller   Pragnesh Patel
• Collecting U-Boot Testresults: was: [ANN] U-Boot v2020.10 released   Heinrich Schuchardt
• Collecting U-Boot Testresults: was: [ANN] U-Boot v2020.10 released   Heiko Schocher
• [PATCH] ARM: dts: stm32: Do not set eth1addr if KS8851 has EEPROM   Patrice CHOTARD
• [PATCH] configs: stm32mp: force empty PREBOOT   Patrick DELAUNAY
• [PATCH] Define default CONFIG_PREBOOT with right config option   Patrick DELAUNAY
• [PATCH v2] net: lx2160a.c: Update to set ECx_PMUX precedence   Razvan Ionut Cirjan
• optee: FIT image sub-image rejected   Robert Delien
• [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick DELAUNAY
• [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH 1/2] i2c: ocores: add i2c driver for OpenCores I2C controller   Sean Anderson
• [PATCH 1/2] i2c: ocores: add i2c driver for OpenCores I2C controller   Pragnesh Patel
• [PATCH 1/2] ram: move aspeed ram driver into drivers/ directory   Tom Rini
• [PATCH 2/2] ram: add ddr4 dual x8 configuration   Tom Rini
• [PATCH v6 01/12] pinctrl: Add pinmux property support to pinctrl-generic   Tom Rini
• [PATCH v6 02/12] pinctrl: Reformat documentation in dm/pinctrl.h   Tom Rini
• [PATCH v6 03/12] test: pinmux: Add test for pin muxing   Tom Rini
• [PATCH v6 04/12] pinctrl: Add support for Kendryte K210 FPIOA   Tom Rini
• [PATCH v6 05/12] gpio: dw: Fix warnings about casting int to pointer   Tom Rini
• [PATCH v6 06/12] gpio: dw: Add a trailing underscore to generated name   Tom Rini
• [PATCH v6 07/12] gpio: dw: Return output value when direction is out   Tom Rini
• [PATCH v6 08/12] led: gpio: Default to using node name if label is absent   Tom Rini
• [PATCH v6 09/12] test: dm: Test for default led naming   Tom Rini
• [PATCH v6 10/12] riscv: Add pinmux and gpio bindings for Kendryte K210   Tom Rini
• [PATCH v6 11/12] riscv: add DT binding for BOOT button on Maix board   Tom Rini
• [PATCH v6 12/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Tom Rini
• [PATCH] wdt: designware: fix timeout calculation due to expecting KHz   Tom Rini
• [PATCH v2 1/1] examples: make examples/ optional   Tom Rini
• [PATCH] arm: Kconfig: Explain TFABOOT   Tom Rini
• [PATCH v2 1/6] arm64: PIE: Do not skip static relocation   Tom Rini
• [PATCH v2 2/6] arm64: PIE: Skip fixups if distance is zero   Tom Rini
• [PATCH v2 3/6] arm64: PIE: Allow fixed stack pointer   Tom Rini
• [PATCH v2 4/6] qemu-arm: Remove need to specify flash banks   Tom Rini
• [PATCH v2 5/6] qemu-arm: Drop ARCH_SUPPORT_TFABOOT   Tom Rini
• [PATCH v2 6/6] qemu-arm64: Enable POSITION_INDEPENDENT   Tom Rini
• [PATCH 1/1] rsa: fix retrieving public exponent on big-endian systems   Tom Rini
• [PATCH] Define default CONFIG_PREBOOT with right config option   Tom Rini
• [PATCH 2/2] am335x_evm: Allow booting from usb-storage device   Tom Rini
• [PATCH] common, autoboot: sync functionality with Kconfig description   Tom Rini
• [PATCH] env: sf: add support for env erase   Sean Anderson
• [PATCH v2 1/2] km: adapt defines and variables for new memory layout   Holger Brunck
• [PATCH v2 2/2] km/common: change ubicopy variable   Holger Brunck
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick DELAUNAY
• [PATCH] env: sf: add support for env erase   Harry Waschkeit
• [PATCH] env: sf: add support for env erase   Sean Anderson
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ahmad Fatoum
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ahmad Fatoum
• [PATCH 1/1] sandbox: make SDL window resizable   Simon Glass
• [PATCH v2 2/2] timer: Return count from timer_ops.get_count   Simon Glass
• [PATCH 4/6] README: sandbox: Change reference to sandbox details   Simon Glass
• [PATCH] common, autoboot: sync functionality with Kconfig description   Simon Glass
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH] ARM: dts: stm32: Consistently enable internal pull-ups for SD bus   Marek Vasut
• [PATCH 1/1] sandbox: make SDL window resizable   Heinrich Schuchardt
• [PATCH v2 1/1] sandbox: make SDL window resizable   Heinrich Schuchardt
• [PATCH 00/16] Kconfig: Tidy up the top-level kconfig menu   Tom Rini
• [PATCH v2 1/5] i2c: mediatek: add basic driver support   Mingming Lee
• [PATCH 00/16] usb: gadget: update   Peng Fan
• [BUG] mx6cuboxi : broken MMC support   François Perrad
• Looking for users of the Faraday USB EHCI driver   Daniel Palmer
• [PATCH v4 0/3] env: Access Environment in SPI flashes before relocation   Heiko Schocher
• [PATCH v4 1/3] env: split env_import_redund() into 2 functions   Heiko Schocher
• [PATCH v4 2/3] env: Access Environment in SPI flashes before relocation   Heiko Schocher
• [PATCH v4 3/3] imx6: enable early spi environment access on aristainetos boards   Heiko Schocher
• u-boot cannot recognize FIT image built from kernel   sprhawk
• Linux mvneta driver unable to read MAC address from HW   Ezra Buehler
• [BUG] mx6cuboxi : broken MMC support   Baruch Siach
• [BUG] mx6cuboxi : broken MMC support   Fabio Estevam
• [PATCH v2 00/22] log: Add commands for manipulating filters   Sean Anderson
• [PATCH v2 01/22] log: Fix missing negation of ENOMEM   Sean Anderson
• [PATCH v2 02/22] log: Fix incorrect documentation of log_filter.cat_list   Sean Anderson
• [PATCH v2 03/22] log: Add additional const qualifier to arrays   Sean Anderson
• [PATCH v2 04/22] log: Add new category names to log_cat_name   Sean Anderson
• [PATCH v2 05/22] log: Use CONFIG_IS_ENABLED() for LOG_TEST   Sean Anderson
• [PATCH v2 06/22] log: Expose some helper functions   Sean Anderson
• [PATCH v2 07/22] log: Add function to create a filter with flags   Sean Anderson
• [PATCH v2 08/22] log: Add filter flag to deny on match   Sean Anderson
• [PATCH v2 09/22] test: Add tests for LOGFF_DENY   Sean Anderson
• [PATCH v2 10/22] log: Add filter flag to match greater than a log level   Sean Anderson
• [PATCH v2 11/22] test: Add test for LOGFF_MIN   Sean Anderson
• [PATCH v2 12/22] cmd: log: Use sub-commands for log   Sean Anderson
• [PATCH v2 13/22] cmd: log: Split off log level parsing   Sean Anderson
• [PATCH v2 14/22] cmd: log: Move log test to end of help string   Sean Anderson
• [PATCH v2 15/22] cmd: log: Add commands to list categories and drivers   Sean Anderson
• [PATCH v2 16/22] cmd: log: Make "log level" print all log levels   Sean Anderson
• [PATCH v2 17/22] lib: Add getopt   Sean Anderson
• [PATCH v2 18/22] test: Add a test for getopt   Sean Anderson
• [PATCH v2 19/22] cmd: log: Add commands to manipulate filters   Sean Anderson
• [PATCH v2 20/22] test: Add a test for log filter-*   Sean Anderson
• [PATCH v2 21/22] doc: Add log kerneldocs to documentation   Sean Anderson
• [PATCH v2 22/22] doc: Update logging documentation   Sean Anderson
• [BUG] mx6cuboxi : broken MMC support   Baruch Siach
• [PATCH 2/2] test: log: test message continuation   Tom Rini
• [PATCH 2/2] test: log: test message continuation   Sean Anderson
• [PATCH 2/2] test: log: test message continuation   Tom Rini
• [BUG] mx6cuboxi : broken MMC support   François Perrad
• [PATCH 2/2] test: log: test message continuation   Heinrich Schuchardt
• [PATCH 2/2] test: log: test message continuation   Heinrich Schuchardt
• [BUG] mx6cuboxi : broken MMC support   Peter Robinson
• [PATCH v3 00/27] Add DM support for omap PWM backlight   Dario Binacchi
• [PATCH v3 01/27] clk: export generic routines   Dario Binacchi
• [PATCH v3 02/27] dt-bindings: bus: ti-sysc: resync with Linux 5.9-rc7   Dario Binacchi
• [PATCH v3 03/27] bus: ti: add minimal sysc interconnect target driver   Dario Binacchi
• [PATCH v3 04/27] arm: dts: sync am33xx with Linux 5.9-rc7   Dario Binacchi
• [PATCH v3 05/27] clk: add clk_round_rate()   Dario Binacchi
• [PATCH v3 06/27] clk: ti: add mux clock driver   Dario Binacchi
• [PATCH v3 07/27] arm: ti: am33xx: add DPLL_EN_FAST_RELOCK_BYPASS macro   Dario Binacchi
• [PATCH v3 08/27] clk: ti: am33xx: add DPLL clock drivers   Dario Binacchi
• [PATCH v3 09/27] clk: ti: add divider clock driver   Dario Binacchi
• [PATCH v3 10/27] clk: ti: add gate clock driver   Dario Binacchi
• [PATCH v3 11/27] ti: am33xx: fix do_enable_clocks() to accept NULL parameters   Dario Binacchi
• [PATCH v3 12/27] clk: ti: add support for clkctrl clocks   Dario Binacchi
• [PATCH v3 13/27] clk: ti: move drivers to 'ti' directory   Dario Binacchi
• [PATCH v3 14/27] clk: ti: omap4: add clock manager driver   Dario Binacchi
• [PATCH v3 15/27] clk: ti: am335x: add clock manager driver   Dario Binacchi
• [PATCH v3 16/27] fdt: translate address if #size-cells = <0>   Dario Binacchi
• [PATCH v3 17/27] omap: timer: fix the rate setting   Dario Binacchi
• [PATCH v3 18/27] misc: am33xx: add control module driver   Dario Binacchi
• [PATCH v3 19/27] pwm: ti: am33xx: add enhanced pwm driver   Dario Binacchi
• [PATCH v3 20/27] bus: ti: am33xx: add pwm subsystem driver   Dario Binacchi
• [PATCH v3 21/27] dm: core: add a function to decode display timings   Dario Binacchi
• [PATCH v3 22/27] video: omap: add panel driver   Dario Binacchi
• [PATCH v3 23/27] video: omap: drop domain clock enabling by SOC api   Dario Binacchi
• [PATCH v3 24/27] video: omap: set LCD clock rate through DM API   Dario Binacchi
• [PATCH v3 25/27] video: omap: split the legacy code from the DM code   Dario Binacchi
• [PATCH v3 26/27] video: omap: move drivers to 'ti' directory   Dario Binacchi
• [PATCH v3 27/27] board: ti: am335x-ice: get CDCE913 clock device   Dario Binacchi
• [PATCH 0/2] clk patches from 'Add DM support for omap PWM backlight' series   Dario Binacchi
• [PATCH 1/2] clk: remove a redundant header   Dario Binacchi
• [PATCH 2/2] arch: sandbox: fix typo in clk.h   Dario Binacchi
• [PATCH 0/2] fix description patches from 'Add DM support for omap PWM backlight' series   Dario Binacchi
• [PATCH 1/2] dm: core: improve uclass_get_device_by_phandle_id() description   Dario Binacchi
• [PATCH 2/2] gpio: fix gpio_request_by_name() description   Dario Binacchi
• [PATCH v3 05/27] clk: add clk_round_rate()   Sean Anderson
• [PATCH] dm: core: fix typo in device.h   Dario Binacchi
• [PATCH 0/2] PWM backlight patches from 'Add DM support for omap PWM backlight' series   Dario Binacchi
• [PATCH 1/2] video: backlight: fix pwm data structure description   Dario Binacchi
• [PATCH 2/2] video: backlight: fix pwm's duty cycle calculation   Dario Binacchi
• [BUG] mx6cuboxi : broken MMC support   Fabio Estevam
• [BUG] mx6cuboxi : broken MMC support   François Perrad
• [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob   Emmanuel Vadot
• [BUG] mx6cuboxi : broken MMC support   Fabio Estevam
• [PATCH] mips: dts: tweak codingstyle for adding new boards   Du Huanpeng
• [PATCH 1/2] clk: renesas: Only ever access documented bits in clock driver teardown   Marek Vasut
• [PATCH 2/2] clk: renesas: Synchronize Gen2 MSTP teardown tables   Marek Vasut
• [PATCH 1/2] dm: core: Add late driver remove option   Marek Vasut
• [PATCH 2/2] clk: renesas: Tear clock controller down last before booting OS   Marek Vasut
• [PATCH v2 1/2] log: Allow LOG_DEBUG to always enable log output   Tom Rini
• [PATCH v2 2/2] lib: Allow hexdump to be used in SPL   Tom Rini
• [PATCH 1/4] log: Add a flag to enable log drivers   Tom Rini
• [PATCH 2/4] log: Drop #ifdef in log_test   Tom Rini
• [PATCH 3/4] log: Add a way to enable/disable a log device   Tom Rini
• [PATCH 4/4] log: Disable the syslog driver by default   Tom Rini
• [PATCH 2/3] net: Expose some errors generated in net_init   Tom Rini
• [PATCH 3/3] log: syslog: Handle errors in net_init   Tom Rini
• [PATCH 1/1] doc: remove redundant doc/README.log   Tom Rini
• [PATCH v2] log: Allow LOG_DEBUG to always enable log output   Tom Rini
• [v2 0/2] Refactor AST2500 reset control   Chia-Wei, Wang
• [v2 1/2] reset: ast2500: Use SCU for reset control   Chia-Wei, Wang
• [v2 2/2] cosmetic: reset: ast2500: Rename driver and configs   Chia-Wei, Wang
• [PATCH 00/17] Add support for MMC higher speed modes for TI's am65x, j721e and j7200 platforms   Lokesh Vutla
• [PATCH 0/2] Refactor AST2500 reset control   ChiaWei Wang
• [PATCH v2 5/5] MAINTAINERS: add i2c driver to ARM MEDIATEK   Simon Glass
• [PATCH 1/1] video: support colors in truetype console   Simon Glass
• [PATCH v2 1/2] doc: Document timer API   Simon Glass
• [PATCH 1/3] riscv: Move Andes PLMT driver to drivers/timer   Simon Glass
• [PATCH 2/3] timer: Add _TIMER suffix to Andes PLMT Kconfig   Simon Glass
• [PATCH 3/3] riscv: Move timer portions of SiFive CLINT to drivers/timer   Simon Glass
• [PATCH 02/16] dm: syscon: Set LOG_CATEGORY   Simon Glass
• [PATCH 03/16] firmware: scmi: Include device_compat.h   Simon Glass
• [PATCH 10/16] tee: optee: Include device_compat.h   Simon Glass
• [PATCH v2 3/3] ut: add small hush tests   Simon Glass
• [PATCH 04/10] lib: fdt: Add fdtdec_setup_mem_size_base_highest   Simon Glass
• [PATCH 05/10] test: Add a test for fdtdec_setup_mem_size_base et al.   Simon Glass
• [PATCH v2 2/5] ARM: dts: Mediatek: add i2c node support for mt8512   Simon Glass
• [PATCH v2 3/5] configs: mt8512: Enable I2C related configs   Simon Glass
• [PATCH v2 4/5] dt-binding: i2c: add bindings for mediatek i2c driver   Simon Glass
• [PATCH 11/16] timer: Include device_compat.h   Simon Glass
• [PATCH 15/16] linux/compat.h: Remove redefinition of dev_xxx macros   Simon Glass
• [PATCH 16/16] dm: Don't undefine dev_xxx macros   Simon Glass
• [PATCH v3 2/3] global_data.h: add Sphinx documentation   Simon Glass
• [PATCH v2 1/2] spl: Use standard FIT entries   Simon Glass
• [PATCH v2 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Simon Glass
• verified boot changes since 2020.04   Simon Glass
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Simon Glass
• [PATCH 1/3] image: Add a function to modify category information   Simon Glass
• [PATCH 2/3] mkimage: Skip adding non-existent IDs to a list   Simon Glass
• [PATCH 3/3] cosmetic: image: Fix comments and the order of definitions   Simon Glass
• [PATCH v2 1/3] cli_hush.c: refactor handle_dollar() to prepare for "run with arguments"   Simon Glass
• [PATCH v2 2/3] allow positional arguments with "run" command   Simon Glass
• [PATCH] Makefile: Fix u-boot-nodtb.bin target   Simon Glass
• [PATCH 1/4] firmware: zynqmp: Swap addr_hi/low when PM_FPGA_LOAD is called   Simon Glass
• [PATCH] tools: image-host.c: use correct output format   Simon Glass
• [PATCH 1/1] lib: rsa: superfluous initialization in rsa_verify()   Simon Glass
• [PATCH v2 03/22] log: Add additional const qualifier to arrays   Simon Glass
• [PATCH v4 1/3] env: split env_import_redund() into 2 functions   Simon Glass
• [PATCH v4 2/3] env: Access Environment in SPI flashes before relocation   Simon Glass
• [PATCH v2 1/1] sandbox: make SDL window resizable   Simon Glass
• [PATCH v2 04/22] log: Add new category names to log_cat_name   Simon Glass
• [PATCH v2 05/22] log: Use CONFIG_IS_ENABLED() for LOG_TEST   Simon Glass
• [PATCH v2 06/22] log: Expose some helper functions   Simon Glass
• [PATCH v2 07/22] log: Add function to create a filter with flags   Simon Glass
• [PATCH v2 08/22] log: Add filter flag to deny on match   Simon Glass
• [PATCH v2 09/22] test: Add tests for LOGFF_DENY   Simon Glass
• [PATCH v2 10/22] log: Add filter flag to match greater than a log level   Simon Glass
• [PATCH v2 11/22] test: Add test for LOGFF_MIN   Simon Glass
• [PATCH v2 12/22] cmd: log: Use sub-commands for log   Simon Glass
• [PATCH v2 13/22] cmd: log: Split off log level parsing   Simon Glass
• [PATCH v2 14/22] cmd: log: Move log test to end of help string   Simon Glass
• [PATCH v2 15/22] cmd: log: Add commands to list categories and drivers   Simon Glass
• [PATCH v2 16/22] cmd: log: Make "log level" print all log levels   Simon Glass
• [PATCH v2 19/22] cmd: log: Add commands to manipulate filters   Simon Glass
• [PATCH v2 20/22] test: Add a test for log filter-*   Simon Glass
• [PATCH v2 21/22] doc: Add log kerneldocs to documentation   Simon Glass
• [PATCH v2 22/22] doc: Update logging documentation   Simon Glass
• [PATCH v3 22/27] video: omap: add panel driver   Simon Glass
• [PATCH] dm: core: fix typo in device.h   Simon Glass
• [PATCH 1/2] dm: core: Add late driver remove option   Simon Glass
• [PATCH v2 1/2] km: adapt defines and variables for new memory layout   Heiko Schocher
• [PATCH v2 2/2] km/common: change ubicopy variable   Heiko Schocher
• [PATCH 01/17] mmc: sdhci: Add helper functions for UHS modes   Faiz Abbas
• [PATCH 00/17] Add support for MMC higher speed modes for TI's am65x, j721e and j7200 platforms   Peng Fan
• [PATCH] board: imx: address dd usage in README   Peng Fan
• [PATCH 0/8] i.MX8MM: add host/gadget support   Peng Fan
• [PATCH 1/8] tcpc: Add driver for USB typec port controller (TCPC)   Peng Fan
• [PATCH 2/8] power: regulator: add dummy helper   Peng Fan
• [PATCH 3/8] phy: nop-phy: add optional clk   Peng Fan
• [PATCH 4/8] usb: imx: add i.MX usb ehci driver   Peng Fan
• [PATCH 5/8] imx8m: enable usb power domain   Peng Fan
• [PATCH 6/8] imx8mm_evk: add usbotg1 host support   Peng Fan
• [PATCH 7/8] usb: ci_udc: Convert driver to DM_USB_GADGET   Peng Fan
• [PATCH 8/8] imx8mm_evk: add fastboot support   Peng Fan
• [PATCH 1/1] rsa: fix retrieving public exponent on big-endian systems   Rasmus Villemoes
• [PATCH v2 2/3] allow positional arguments with "run" command   Rasmus Villemoes
• [PATCH 0/6] mmc: fsl_esdhc: add ADMA2 support   Peng Fan
• [PATCH 1/4] firmware: zynqmp: Swap addr_hi/low when PM_FPGA_LOAD is called   Michal Simek
• [PATCH] Remove default value of CONFIG_PREBOOT for CONFIG_USB_STORAGE   Patrick Delaunay
• [PATCH] Define default CONFIG_PREBOOT with right config option   Patrick DELAUNAY
• [PATCH v3 0/2] Add support for loading images above 4GB   Michal Simek
• [PATCH v3 1/2] spl: Use standard FIT entries   Michal Simek
• [PATCH v3 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Michal Simek
• [PATCH v2 1/2] spl: Use standard FIT entries   Michal Simek
• [PATCH v2 0/5] microblaze: Switch to distro boot   Michal Simek
• [PATCH v2 1/5] microblaze: Enable spi for microblaze   Michal Simek
• [PATCH v2 2/5] microblaze: trivial code fixes   Michal Simek
• [PATCH v2 3/5] microblaze: board: Check return value whlie saving env variables   Michal Simek
• [PATCH v2 4/5] microblaze: Setup distro boot env variables at run time   Michal Simek
• [PATCH v2 5/5] microblaze: Add support for distro boot   Michal Simek
• [PATCH v2 1/2] mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()   Michael Walle
• [PATCH v2 2/2] mmc: fsl_esdhc: add ADMA2 support   Michael Walle
• [PATCH 0/6] mmc: fsl_esdhc: add ADMA2 support   Michael Walle
• [PATCH 1/2] dm: core: Add late driver remove option   Marek Vasut
• [PATCH v2 3/5] configs: mt8512: Enable I2C related configs   Mingming Lee
• [PATCH v2 4/5] dt-binding: i2c: add bindings for mediatek i2c driver   Mingming Lee
• am335x uart boot   Matwey V. Kornilov
• [PATCH 1/8] tcpc: Add driver for USB typec port controller (TCPC)   Marek Vasut
• [PATCH 3/8] phy: nop-phy: add optional clk   Marek Vasut
• [PATCH 4/8] usb: imx: add i.MX usb ehci driver   Marek Vasut
• [PATCH 5/8] imx8m: enable usb power domain   Marek Vasut
• [GIT PULL] TI changes for v2021.01-rc1   Lokesh Vutla
• [PATCH] dma: ti: k3-udma: Reset the channel during release   Lokesh Vutla
• [PATCH] board: ti: j721e: Fix OSPI node compatible   Lokesh Vutla
• [PATCH] configs: am335x_evm_defconfig: Enable CONFIG_OF_LIBFDT_OVERLAY   Lokesh Vutla
• [PATCH] phy: omap-usb2-phy: Drop usage of "ti, dis-chg-det-quirk" DT property   Lokesh Vutla
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [PATCH V2 0/4] configs: ti: am65x/j721e: Use DEFAULT_LINUX_BOOT_ENV   Lokesh Vutla
• [PATCH 3/8] phy: nop-phy: add optional clk   Peng Fan
• [PATCH 4/8] usb: imx: add i.MX usb ehci driver   Peng Fan
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH 5/8] imx8m: enable usb power domain   Peng Fan
• [PATCH] mmc: Fix comment typo   Naoki Hayama
• [PATCH] fs: btrfs: Fix typo in error message   Naoki Hayama
• [PATCH] usb: musb-new: Fix typo in caution message   Naoki Hayama
• [PATCH] ARM: mvebu: a38x: Fix comment typo   Naoki Hayama
• [PATCH 1/8] tcpc: Add driver for USB typec port controller (TCPC)   Peng Fan
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [PATCH] fs: btrfs: Fix typo in error message   Marek Behún
• [v2 1/2] reset: ast2500: Use SCU for reset control   Ryan Chen
• [v2 2/2] cosmetic: reset: ast2500: Rename driver and configs   Ryan Chen
• [GIT PULL] SoCFPGA changes for v2021.01-rc1   Tan, Ley Foon
• [PATCH 1/8] tcpc: Add driver for USB typec port controller (TCPC)   Marek Vasut
• [PATCH] usb: musb-new: Fix typo in caution message   Marek Vasut
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH 5/8] imx8m: enable usb power domain   Marek Vasut
• [PATCH] fs: btrfs: Fix typo in error message   Qu Wenruo
• [PATCH 1/1] rsa: fix retrieving public exponent on big-endian systems   Tom Rini
• [PATCH] board/freescale/vid: enables writes to all commands for LTC3882   Biwen Li
• [PATCH] ARM: mvebu: a38x: Fix comment typo   Stefan Roese
• [PATCH 2/2] am335x_evm: Allow booting from usb-storage device   Tom Rini
• [PATCH 2/2] am335x_evm: Allow booting from usb-storage device   Matwey V. Kornilov
• [PATCH] SPL: stm32mp1: fix spl_mmc_boot_partition not defined   Richard Genoud
• RPi3: serial console   Heinrich Schuchardt
• [GIT PULL] TI changes for v2021.01-rc1   Tom Rini
• [GIT PULL] SoCFPGA changes for v2021.01-rc1   Tom Rini
• [PATCH v5 0/3] Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH v5 1/3] arm: renesas: Add config option for R8A774B1 SoC   Biju Das
• [PATCH v5 2/3] arm: renesas: Add config option for R8A774E1 SoC   Biju Das
• [PATCH v5 3/3] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Biju Das
• RPi3: serial console   Peter Robinson
• [PATCH 1/1] rsa: fix retrieving public exponent on big-endian systems   Simon Glass
• [PATCH v2 05/22] log: Use CONFIG_IS_ENABLED() for LOG_TEST   Sean Anderson
• [PATCH] clk: ccf: replace get_rate helper   Dario Binacchi
• [PATCH] mips: dts: tweak codingstyle for adding new boards   Daniel Schwierzeck
• [PATCH v5 1/3] arm: renesas: Add config option for R8A774B1 SoC   Marek Vasut
• [PATCH v5 2/3] arm: renesas: Add config option for R8A774E1 SoC   Marek Vasut
• [PATCH v2 00/16] riscv: k210: Enable use of AI ram bank   Sean Anderson
• [PATCH v2 01/16] clk: k210: Fix PLLs not being enabled   Sean Anderson
• [PATCH v2 02/16] clk: k210: Fix PLL enable always getting taken   Sean Anderson
• [PATCH v2 03/16] clk: k210: Remove bypass clock   Sean Anderson
• [PATCH v2 04/16] clk: k210: Remove k210_register_pll   Sean Anderson
• [PATCH v2 05/16] clk: k210: Move the clint clock to under aclk   Sean Anderson
• [PATCH v2 06/16] clk: Add support for the k210 clock driver pre-relocation   Sean Anderson
• [PATCH v2 07/16] riscv: Enable some devices pre-relocation   Sean Anderson
• [PATCH v2 08/16] lib: fdt: Add fdtdec_setup_mem_size_base_highest   Sean Anderson
• [PATCH v2 09/16] test: Add a test for fdtdec_setup_mem_size_base et al.   Sean Anderson
• [PATCH v2 10/16] ram: Add driver for K210 SRAM   Sean Anderson
• [PATCH v2 11/16] ram: sifive: Default to y only if compiling for fu540   Sean Anderson
• [PATCH v2 12/16] riscv: Probe ram in dram_init   Sean Anderson
• [PATCH v2 13/16] riscv: Enable AI ram on K210   Sean Anderson
• [PATCH v2 14/16] riscv: k210: Rename airam to aisram   Sean Anderson
• [PATCH v2 15/16] riscv: k210: Use AI as the parent clock of aisram, not PLL1   Sean Anderson
• [PATCH v2 16/16] riscv: Don't reserve AI ram in k210 dts   Sean Anderson
• [PATCH] riscv: k210: Reduce DMA block size   Sean Anderson
• RPi3: serial console   Heinrich Schuchardt
• [PATCH] thermal: imx_tmu: fix missing include   Tim Harvey
• [PATCH] imx: cpu: terminate line with CR if invalid temp sensor   Tim Harvey
• IMX8MM imx_tmu   Tim Harvey
• STM32MP1: Adding TF-A causes kernel errors   Jan Kiszka
• RPi3: serial console   Otavio Salvador
• [PATCH] fs: btrfs: Fix typo in error message   Naoki Hayama
• [v2] configs: lx2162aqds: enable eMMC HS400 mode support   Yangbo Lu
• Linux mvneta driver unable to read MAC address from HW   Thomas Petazzoni
• [PATCH next v7 00/10] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• Linux mvneta driver unable to read MAC address from HW   Ezra Buehler
• [PATCH v2 0/5] Add Clock and Pincontrol driver support for RZ/G2[HN] SoC's   Biju Das
• [PATCH v2 1/5] clk: renesas: Add R8A774B1 clock tables   Biju Das
• [PATCH v2 2/5] clk: renesas: r8a774b1-cpg-mssr: Add R8A774B1 RPC clock   Biju Das
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• [PATCH v2 4/5] clk: renesas: Add R8A774E1 clock tables   Biju Das
• [PATCH v2 5/5] pinctrl: renesas: r8a77951: Add R8A774E1 PFC support   Biju Das
• [PATCH 1/8] tcpc: Add driver for USB typec port controller (TCPC)   Peng Fan
• [PATCH 1/8] tcpc: Add driver for USB typec port controller (TCPC)   Marek Vasut
• [PATCH 1/8] tcpc: Add driver for USB typec port controller (TCPC)   Peng Fan
• [PATCH 1/8] tcpc: Add driver for USB typec port controller (TCPC)   Marek Vasut
• [PATCH next v7 00/10] Add support MediaTek USB3 DRD driver   Bin Meng
• [PATCH 1/2] cmd: Rename CMD_MISC to CMD_SLEEP   Bin Meng
• [PATCH 2/2] cmd: Split out timer command from the sleep command   Bin Meng
• [PATCH v2 1/2] cmd: Rename CMD_MISC to CMD_SLEEP   Bin Meng
• [PATCH v2 2/2] cmd: Split out timer command from the sleep command   Bin Meng
• STM32MP1: Adding TF-A causes kernel errors   Patrick DELAUNAY
• [PATCH] SPL: stm32mp1: fix spl_mmc_boot_partition not defined   Patrick DELAUNAY
• [PATCH] SPL: stm32mp1: fix spl_mmc_boot_partition not defined   Richard Genoud
• [PATCH] imx: cpu: terminate line with CR if invalid temp sensor   Fabio Estevam
• [PATCH] board: imx: address dd usage in README   Tom Rini
• RPi3: serial console   Peter Robinson
• [PATCH v3 1/3] vboot: add DTB policy for supporting multiple required conf keys   Tom Rini
• [PATCH v3 2/3] test: vboot: add tests for multiple required keys   Tom Rini
• [PATCH v3 3/3] doc: verified-boot: add required-mode information   Tom Rini
• [PATCH 1/2] fit: cipher: aes: allow to store the IV in the FIT image   Tom Rini
• [PATCH 2/2] fit: cipher: aes: allow to read the IV in the FIT image   Tom Rini
• [PATCH] lib: rsa: check algo match in rsa_verify_with_keynode   Tom Rini
• [PATCH 1/1] rsa: fix retrieving public exponent on big-endian systems   Tom Rini
• [PATCH 1/1] lib: rsa: superfluous initialization in rsa_verify()   Tom Rini
• [PATCH 1/1] lib/hashtable: remove superfluous check   Tom Rini
• [PATCH next v7 01/10] dt-binding: usb: add bindings for some common properties   Bin Meng
• [PATCH next v7 02/10] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Bin Meng
• [PATCH next v7 03/10] usb: add USB_SPEED_SUPER_PLUS   Bin Meng
• [PATCH next v7 04/10] usb: common: add define of usb_speed_string()   Bin Meng
• STM32MP1: Adding TF-A causes kernel errors   Jan Kiszka
• [PATCH next v7 05/10] usb: add MediaTek USB3 DRD driver   Bin Meng
• [PATCH next v7 06/10] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller   Bin Meng
• [PATCH next v7 07/10] arm: dts: mt8512: add usb related nodes   Bin Meng
• [PATCH next v7 09/10] configs: mt8512: add USB host related configs   Bin Meng
• [PATCH next v7 10/10] MAINTAINERS: add USB driver to ARM MEDIATEK   Bin Meng
• [PATCH 1/1] usb: xhci: avoid type conversion of void *   Bin Meng
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Alper Nebi Yasak
• [PATCH v5 2/3] test: Add PStore command tests   Tom Rini
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Simon Glass
• [PATCH v5 2/3] test: Add PStore command tests   Frédéric Danis
• [PATCH] SPL: stm32mp1: fix spl_mmc_boot_partition not defined   Patrick DELAUNAY
• [PATCH v2] ARM: stm32: Use firmware property instead of loadables   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Do not set eth1addr if KS8851 has EEPROM   Patrick DELAUNAY
• [PATCH v2] ARM: stm32: Use firmware property instead of loadables   Marek Vasut
• [PATCH v2 1/5] clk: renesas: Add R8A774B1 clock tables   Marek Vasut
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Marek Vasut
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• [PATCH v2 1/5] clk: renesas: Add R8A774B1 clock tables   Biju Das
• [PATCH v5 2/3] test: Add PStore command tests   Tom Rini
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Marek Vasut
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• [PATCH v5 2/3] test: Add PStore command tests   Tom Rini
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Marek Vasut
• [PATCH] test: Fix sandbox tests failing to build   Sean Anderson
• [PATCH] riscv: Fix efi header for RV32   Atish Patra
• [PATCH 0/3] rockchip: efuse: add RK3288/RK3328 support   Jonas Karlman
• [PATCH 1/3] rockchip: efuse: add support for RK3288 non-secure efuse   Jonas Karlman
• [PATCH 2/3] rockchip: efuse: add support for RK3328 non-secure efuse   Jonas Karlman
• [PATCH 3/3] rockchip: dts: rk3288: enable efuse node   Jonas Karlman
• IMX8MM imx_tmu   Tim Harvey
• [PATCH 1/3] riscv: Move Andes PLMT driver to drivers/timer   Rick Chen
• [PATCH 2/3] timer: Add _TIMER suffix to Andes PLMT Kconfig   Rick Chen
• [PATCH 3/3] riscv: Move timer portions of SiFive CLINT to drivers/timer   Rick Chen
• [PATCH 3/3] riscv: Move timer portions of SiFive CLINT to drivers/timer   Sean Anderson
• [PATCH] riscv: Fix efi header for RV32   Bin Meng
• [PATCH] riscv: Fix efi header for RV32   Heinrich Schuchardt
• [PATCH] test: Fix sandbox tests failing to build   Simon Glass
• [PATCH] log: Tidy up documentation   Simon Glass
• [PATCH next v7 02/10] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
• [PATCH next v7 03/10] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
• [PATCH next v7 05/10] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH next v7 09/10] configs: mt8512: add USB host related configs   Chunfeng Yun
• [PATCH] doc: dfu: fix typo in README.dfu   Chance.Yang
• [PATCH] cmd: Add a 'misc' command to access miscellaneous devices   Bin Meng
• [PATCH v8 0/9] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v8 1/9] dt-binding: usb: add bindings for some common properties   Chunfeng Yun
• [PATCH v8 2/9] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
• [PATCH v8 3/9] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
• [PATCH v8 4/9] usb: common: add define of usb_speed_string()   Chunfeng Yun
• [PATCH v8 5/9] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v8 6/9] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller   Chunfeng Yun
• [PATCH v8 7/9] arm: dts: mt8512: add usb related nodes   Chunfeng Yun
• [PATCH v8 8/9] configs: mt8512: enable fastboot and USB host related configs   Chunfeng Yun
• [PATCH v8 9/9] MAINTAINERS: add USB driver to ARM MEDIATEK   Chunfeng Yun
• [PATCH v8 2/9] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Bin Meng
• [PATCH v8 5/9] usb: add MediaTek USB3 DRD driver   Bin Meng
• [PATCH v8 8/9] configs: mt8512: enable fastboot and USB host related configs   Bin Meng
• [PATCH 00/17] fs/squashfs: fix memory leaks and introduce exists() function   Richard Genoud
• [PATCH 01/17] fs/squashfs: fix board hang-up when calling .exists()   Richard Genoud
• [PATCH 02/17] fs/squashfs: sqfs_opendir: fix some memory leaks and dangling pointers   Richard Genoud
• [PATCH 03/17] fs/squashfs: sqfs_opendir: simplify error handling   Richard Genoud
• [PATCH 04/17] fs/squashfs: sqfs_closedir: fix memory leak   Richard Genoud
• [PATCH 05/17] fs/squashfs: sqfs_split_path: fix memory leak and dangling pointers   Richard Genoud
• [PATCH 06/17] fs/squashfs: sqfs_read_directory_table: fix memory leak   Richard Genoud
• [PATCH 07/17] fs/squashfs: sqfs_search_dir: fix dangling pointer   Richard Genoud
• [PATCH 08/17] fs/squashfs: sqfs_search_dir: fix memory leaks   Richard Genoud
• [PATCH 09/17] fs/squashfs: sqfs_read_inode_table: fix dangling pointer   Richard Genoud
• [PATCH 10/17] fs/squashfs: sqfs_concat_tokens: check if malloc succeeds   Richard Genoud
• [PATCH 11/17] fs/squashfs: sqfs_size: fix dangling pointer dirs->entry   Richard Genoud
• [PATCH 12/17] fs/squashfs: sqfs_size: remove useless sqfs_closedir()   Richard Genoud
• [PATCH 13/17] fs/squashfs: sqfs_read: fix dangling pointer dirs->entry   Richard Genoud
• [PATCH 14/17] fs/squashfs: sqfs_read: remove useless sqfs_closedir()   Richard Genoud
• [PATCH 15/17] fs/squashfs: sqfs_read: fix memory leak   Richard Genoud
• [PATCH 16/17] fs/squashfs: sqfs_read: fix another memory leak   Richard Genoud
• [PATCH 17/17] fs/squashfs: implement exists() function   Richard Genoud
• [PATCH v3] mtd: nand: Add NAND controller driver for OcteonTX   Stefan Roese
• [PATCH v3] net: Add NIC controller driver for OcteonTX   Stefan Roese
• [PATCH v3] net: Add NIC controller driver for OcteonTX2   Stefan Roese
• [PATCH 1/2] arm: mvebu: Initial iEi Puzzle-M801 support   Luka Perkov
• [PATCH 1/2] arm: mvebu: Initial iEi Puzzle-M801 support   Stefan Roese
• [PATCH 2/2] arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 networking   Stefan Roese
• [PATCH 1/2] arm: mvebu: Initial iEi Puzzle-M801 support   Stefan Roese
• [PATCH v3] spi: mvebu_a3700_spi: add support for cs-gpios   Stefan Roese
• [PATCH v8 8/9] configs: mt8512: enable fastboot and USB host related configs   Chunfeng Yun
• [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings   Stefan Roese
• [PATCH v2 2/3] arm64: dts: armada-3720-espressobin: split common parts to .dtsi   Stefan Roese
• [PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc   Stefan Roese
• [PATCH] arm: mvebu: Remove old comments from configs/mvebu_armada-37xx.h file   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc   Pali Rohár
• [PATCH v8 5/9] usb: add MediaTek USB3 DRD driver   Marek Vasut
• [PATCH v3 00/27] Add DM support for omap PWM backlight   Felix Brack
• [PATCH 0/3] arm: zynqmp: Add zynqmp specific command for security features   Michal Simek
• [PATCH 1/3] arm64: zynqmp: Add support for encryption and decryption on data blob   Michal Simek
• [PATCH 2/3] arm64: zynqmp: Add support for RSA command   Michal Simek
• [PATCH 3/3] arm64: zynqmp: Add support for SHA3 command   Michal Simek
• [PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc   Andre Heider
• [PATCH] serial: pl01x: Add error value checking   Michal Simek
• [PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc   Pali Rohár
• [PATCH] dt-bindings: arm64: versal: Add clk and power headers   Michal Simek
• [PATCH v8 5/9] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v9] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH] spi: zynq_spi: Use clk subsystem to get reference spi clk   Michal Simek
• [PATCH] spi: zynq_qspi: Use clk subsystem to get reference qspi clk   Michal Simek
• [PATCH] xilinx: zynqmp: Add support for saving sha3 key to different address   Michal Simek
• [PATCH V2 00/12] imx: doc update   Peng Fan
• [PATCH V2 01/12] board: imx: address dd usage in README   Peng Fan
• [PATCH V2 02/12] doc: board: Convert i.MX8MP EVK README to reST   Peng Fan
• [PATCH V2 03/12] doc: board: Convert i.MX8MN EVK README to reST   Peng Fan
• [PATCH V2 04/12] doc: board: Convert i.MX8MM EVK README to reST   Peng Fan
• [PATCH V2 05/12] doc: board: Convert i.MX8MQ EVK README to reST   Peng Fan
• [PATCH V2 06/12] doc: board: Convert i.MX8QXP MEK README to reST   Peng Fan
• [PATCH V2 07/12] doc: board: Convert i.MXRT1020 EVK README to reST   Peng Fan
• [PATCH V2 08/12] doc: board: Convert i.MXRT1050 EVK README to reST   Peng Fan
• [PATCH V2 09/12] doc: board: Convert i.MX6 Sabreauto README to reST   Peng Fan
• [PATCH V2 10/12] doc: board: Convert i.MX6 Sabresd README to reST   Peng Fan
• [PATCH V2 11/12] doc: board: Convert i.MX6UL 14x14 EVK README to reST   Peng Fan
• [PATCH V2 12/12] doc: board: Convert i.MX6ULL EVK README to reST   Peng Fan
• [PATCH 00/33] stm32: enable logging features   Patrick Delaunay
• [PATCH 01/33] arm: stm32mp: migrate trace to log macro   Patrick Delaunay
• [PATCH 02/33] arm: stm32mp: migrate cmd_stm32prog to log macro   Patrick Delaunay
• [PATCH 03/33] arm: stm32mp: bsec: migrate trace to log macro   Patrick Delaunay
• [PATCH 04/33] pinctrl: stm32: migrate trace to log macro   Patrick Delaunay
• [PATCH 05/33] gpio: stm32-gpio: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 06/33] remoproc: stm32: migrate trace to log macro   Patrick Delaunay
• [PATCH 07/33] ram: stm32: migrate trace to log macro   Patrick Delaunay
• [PATCH 08/33] ram: stm32mp1: migrate trace to dev or log macro   Patrick Delaunay
• [PATCH 09/33] mmc: stm32_sdmmc2: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 10/33] timer: stm32: migrate trace to log macro   Patrick Delaunay
• [PATCH 11/33] hwspinlock: stm32: migrate trace to log macro   Patrick Delaunay
• [PATCH 12/33] rtc: stm32: migrate trace to log macro   Patrick Delaunay
• [PATCH 13/33] watchdog: stm32mp: migrate trace to dev macro   Patrick Delaunay
• [PATCH 14/33] power: regulator: stm32-verfbuf: define LOG_CATEGORY   Patrick Delaunay
• [PATCH 15/33] misc: rcc: migrate trace to dev macro   Patrick Delaunay
• [PATCH 16/33] misc: rcc: keep the rcc device name for subnode   Patrick Delaunay
• [PATCH 17/33] clk: stm32mp1: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 18/33] clk: clk_stm32f: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 19/33] clk: clk_stm32h7: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 20/33] reset: stm32-reset: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 21/33] mailbox: stm32-ipcc: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 22/33] i2c: stm32f7_i2c: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 23/33] phy: stm32-usbphyc: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 24/33] spi: stm32_spi: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 25/33] spi: stm32_qspi: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 26/33] mtd: stm32_fmc2: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 27/33] memory: stm32-fmc2: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 28/33] serial: stm32: define LOG_CATEGORY   Patrick Delaunay
• [PATCH 29/33] video: stm32_ltdc: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 30/33] video: stm32_dsi: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 31/33] board: st: stm32mp1: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 32/33] board: st: common: migrate trace to dev and log macro   Patrick Delaunay
• [PATCH 33/33] configs: stm32mp15: enable LOG features   Patrick Delaunay
• [PATCH] spi: xilinx_spi: remove unused local variable   Michal Simek
• [PATCH v9] usb: add MediaTek USB3 DRD driver   Marek Vasut
• [PATCH v2] drivers: serial: probe all uart devices   Vabhav Sharma (OSS)
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• [PATCH v2] drivers: serial: probe all uart devices   Vabhav Sharma (OSS)
• [PATCH] configs: mt8512: enable device mode of mtu3 explicitly   Chunfeng Yun
• [PATCH v9] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH] configs: mt8512: enable device mode of mtu3 explicitly   Bin Meng
• [PATCH v2] drivers: serial: probe all uart devices   Stefan Roese
• [PATCH] configs: mt8512: enable device mode of mtu3 explicitly   Chunfeng Yun
• [PATCH v2] configs: mt8512: enable device mode of mtu3 explicitly   Chunfeng Yun
• [PATCH v2] configs: mt8512: enable device mode of mtu3 explicitly   Marek Vasut
• [PATCH v2] configs: mt8512: enable device mode of mtu3 explicitly   Chunfeng Yun
• [PATCH v9] usb: add MediaTek USB3 DRD driver   Marek Vasut
• [PATCH 03/32] x86: Add a layout for Chrome OS verified boot   Simon Glass
• [PATCH] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz
• [PATCH v2 05/22] log: Use CONFIG_IS_ENABLED() for LOG_TEST   Simon Glass
• [PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc   Pali Rohár
• [PATCH RESEND v9] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v2] configs: mt8512: enable device mode of mtu3 explicitly   Marek Vasut
• [PATCH 0/3] xilinx: board: Add support for board eeproms   Michal Simek
• [PATCH 1/3] dm: core: Add support for getting node from aliases   Michal Simek
• [PATCH 2/3] xilinx: board: Read the whole eeprom not just offset   Michal Simek
• [PATCH 3/3] xilinx: board: Add support for additional card detection   Michal Simek
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Tom Rini
• [PATCH V2 00/12] imx: doc update   Tom Rini
• [PATCH v3] pinctrl: renesas: pfc-r8a77990: Sync PFC tables with Linux 5.9   Lad Prabhakar
• [PATCH] env: sf: add support for env erase   Harry Waschkeit
• [PATCH] mtd: spi-nor-ids: Add Winbond W25M512JV flash entry   Lad, Prabhakar
• [PATCH v3 0/2] Add Clock driver support for RZ/G2[HN] SoC's   Biju Das
• [PATCH v3 1/2] clk: renesas: Add R8A774B1 clock tables   Biju Das
• [PATCH v3 2/2] clk: renesas: Add R8A774E1 clock tables   Biju Das
• [PATCH] cmd: fat: Use do_save() for fatwrite   Tom Rini
• [PATCH 1/2] mmc: remove duplicate mmc_get_env_dev() implementations   Tom Rini
• [PATCH 2/2] env/ext4.c: allow loading from an EXT4 partition on the MMC boot device   Tom Rini
• [PATCH] spl: Avoid printing boot device if silent console is enabled   Tom Rini
• [PATCH v2] time: Fix get_ticks being non-monotonic   Tom Rini
• [PATCH v2 1/3] test: sharpen button label unit test   Tom Rini
• [PATCH v2 2/3] drivers: gpio: keep output value for input on sandbox   Tom Rini
• [PATCH v2 3/3] cmd/button: return button status   Tom Rini
• [PATCH 1/1] bootm: add {arch,board}_preboot_os() to bootm.h   Tom Rini
• [PATCH 1/1] arm: enable DM_RNG on QEMU by default   Tom Rini
• [PATCH 2/2] spl: Add SPL_SERIAL as requirement for SDP_USB_SDP   Tom Rini
• [PATCH v3 1/3] global_data.h: convert GD_FLG_* to enum   Tom Rini
• [PATCH v3 2/3] global_data.h: add Sphinx documentation   Tom Rini
• [PATCH v3 3/3] doc: global data pointer   Tom Rini
• [PATCH v2 1/2] treewide: Fix wrong CONFIG_IS_ENABLED() handling   Tom Rini
• [PATCH v2 2/2] checkpatch.pl: Make CONFIG_IS_ENABLED(CONFIG_*) an error   Tom Rini
• [PATCH v2] net: e1000: add defaults for i210 TX/RX PBSIZE   Tom Rini
• [PATCH v2] doc: Sphinx.override_domain() deprecated   Tom Rini
• [PATCH v5 1/3] cmd: Add command to display or save Linux PStore dumps   Tom Rini
• [PATCH v5 3/3] cmd: Fixup DT to pass PStore Ramoops parameters   Tom Rini
• [PATCH v5 2/3] test: Add PStore command tests   Tom Rini
• [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob   Hugh Cole-Baker
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Alper Nebi Yasak
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Simon Glass
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Tom Rini
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Alper Nebi Yasak
• [PATCH v3 00/27] Add DM support for omap PWM backlight   Dario Binacchi
• [PATCH v2] clk: ccf: replace the get_rate helper   Dario Binacchi
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v2] configs: mt8512: enable device mode of mtu3 explicitly   Chunfeng Yun
• [PATCH v9] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v2] configs: mt8512: enable device mode of mtu3 explicitly   Chunfeng Yun
• [v3 0/2] Refactor AST2500 reset control   Chia-Wei, Wang
• [v3 1/2] reset: ast2500: Use SCU for reset control   Chia-Wei, Wang
• [v3 2/2] cosmetic: reset: ast2500: Rename driver and configs   Chia-Wei, Wang
• [v3 0/2] Refactor AST2500 reset control   ChiaWei Wang
• Missing license/copyright notice in zlib.h   Tan, Ley Foon
• [PATCH 0/4] xen: improve console outputs   AKASHI Takahiro
• [PATCH 1/4] serial: serial_xen: print U-Boot banner and others   AKASHI Takahiro
• [PATCH 2/4] arch: arm/xen: add putc() for debugging   AKASHI Takahiro
• [PATCH 3/4] xen: add definitions for console_io   AKASHI Takahiro
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   AKASHI Takahiro
• [PATCH 1/4] treewide: configs: get rid of unused CONFIG_DEFAULT_CONSOLE   Minkyu Kang
• [PATCH 1/1] espresso7420: remove unused symbol CONFIG_DEFAULT_CONSOLE   Minkyu Kang
• CONFIG_UPDATE_TFTP   Heinrich Schuchardt
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Peng Fan
• [PATCH 1/4] serial: serial_xen: print U-Boot banner and others   Peng Fan
• [PATCH 2/4] arch: arm/xen: add putc() for debugging   Peng Fan
• [PATCH 3/4] xen: add definitions for console_io   Peng Fan
• [PATCH] dm: pci: fsl: Correct the workaround of erratum A-007815   Zhiqiang Hou
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Arnaud Patard (Rtp)
• [PATCH] mtd: spi-nor-ids: Add Winbond W25M512JW flash entry   Biju Das
• [PATCH] include/configs: ls1012aqds: add default environment variable   Biwen Li
• [PATCH 30/33] video: stm32_dsi: migrate trace to dev and log macro   Philippe CORNU
• [PATCH v3 00/27] Add DM support for omap PWM backlight   Felix Brack
• [PATCH 03/32] x86: Add a layout for Chrome OS verified boot   Bin Meng
• fatal error: Python.h: No such file or directory   Peng Fan
• STM32MP1: Adding TF-A causes kernel errors   Jan Kiszka
• [PATCH 13/13] usb: ehci-mx6: Improve the bind function   Peng Fan
• [PATCH] phy: nop-phy: add clk bulk   Peng Fan
• [PATCH] power: regulator: add dummy helper   Peng Fan
• [PATCH 09/33] mmc: stm32_sdmmc2: migrate trace to dev and log macro   Peng Fan
• [PATCH] stm32mp: stm32prog: accept device without partition   Patrick Delaunay
• [PATCH v9] usb: add MediaTek USB3 DRD driver   Marek Vasut
• [PATCH v2] configs: mt8512: enable device mode of mtu3 explicitly   Marek Vasut
• [v3 00/16] Enable ARM Trusted Firmware for U-Boot   Siew Chin Lim
• [v3 01/16] arm: socfpga: Add function for checking description from FIT image   Siew Chin Lim
• [v3 02/16] arm: socfpga: soc64: Load FIT image with ATF support   Siew Chin Lim
• [v3 03/16] arm: socfpga: soc64: Override 'lowlevel_init' to support ATF   Siew Chin Lim
• [v3 04/16] arm: socfpga: Disable "spin-table" method for booting Linux   Siew Chin Lim
• [v3 05/16] arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA (64bits)   Siew Chin Lim
• [v3 06/16] arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP services   Siew Chin Lim
• [v3 07/16] mmc: dwmmc: socfpga: Add ATF support for MMC driver   Siew Chin Lim
• [v3 08/16] net: designware: socfpga: Add ATF support for MAC driver   Siew Chin Lim
• [v3 09/16] arm: socfpga: soc64: Add ATF support for Reset Manager driver   Siew Chin Lim
• [v3 10/16] arm: socfpga: soc64: Add ATF support for FPGA reconfig driver   Siew Chin Lim
• [v3 11/16] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()   Siew Chin Lim
• [v3 12/16] arm: socfpga: soc64: SSBL shall not setup stack on OCRAM   Siew Chin Lim
• [v3 13/16] arm: socfpga: soc64: Skip handoff data access in SSBL   Siew Chin Lim
• [v3 14/16] arm: socfpga: dts: soc64: Add binman node of FIT image with ATF support   Siew Chin Lim
• [v3 15/16] arm: socfpga: soc64: Enable FIT image generation using binman   Siew Chin Lim
• [v3 16/16] configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF support   Siew Chin Lim
• [PATCH 1/2] configs: stm32mp15: activate CMD_IMPORTENV   Patrick Delaunay
• [PATCH 2/2] configs: stm32mp15: activate CMD_EXPORTENV   Patrick Delaunay
• [PATCH 13/13] usb: ehci-mx6: Improve the bind function   Marek Vasut
• CONFIG_UPDATE_TFTP   Marek Vasut
• [PATCH] configs: stm32mp15: activate CMD_ELF   Patrick Delaunay
• CONFIG_UPDATE_TFTP   Heinrich Schuchardt
• [PATCH] usb: dwc2: add "u-boot,force-vbus-detection" for stm32   Patrick Delaunay
• [PATCH] phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off   Patrick Delaunay
• [PATCH] board: stm32mp1: no MTD partitions fixup for serial boot   Patrick Delaunay
• [PATCH 1/3] reset: stm32: Add support of MCU HOLD BOOT   Patrick Delaunay
• [PATCH 2/3] remoteproc: stm32: use reset for hold boot   Patrick Delaunay
• [PATCH 3/3] remoteproc: stm32: update error management in stm32_copro_start   Patrick Delaunay
• CONFIG_UPDATE_TFTP   Marek Vasut
• [PATCH] usb: dwc2: add "u-boot,force-vbus-detection" for stm32   Marek Vasut
• [PATCH 05/17] fs/squashfs: sqfs_split_path: fix memory leak and dangling pointers   Miquel Raynal
• [PATCH 06/17] fs/squashfs: sqfs_read_directory_table: fix memory leak   Miquel Raynal
• fatal error: Python.h: No such file or directory   Tom Rini
• Bootable image for imx8qxp   Matthias Weißer
• [PATCH v2] drivers: serial: probe all uart devices   Simon Glass
• [PATCH v2 2/3] allow positional arguments with "run" command   Simon Glass
• [PATCH] Remove default value of CONFIG_PREBOOT for CONFIG_USB_STORAGE   Simon Glass
• [PATCH v3 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Simon Glass
• [PATCH 1/2] dm: core: Add late driver remove option   Simon Glass
• [PATCH 1/3] rockchip: efuse: add support for RK3288 non-secure efuse   Simon Glass
• [PATCH 2/3] rockchip: efuse: add support for RK3328 non-secure efuse   Simon Glass
• [PATCH 3/3] rockchip: dts: rk3288: enable efuse node   Simon Glass
• [PATCH] serial: pl01x: Add error value checking   Simon Glass
• [PATCH 00/33] stm32: enable logging features   Simon Glass
• [PATCH 1/3] dm: core: Add support for getting node from aliases   Simon Glass
• [v3 14/16] arm: socfpga: dts: soc64: Add binman node of FIT image with ATF support   Simon Glass
• [PATCH] serial: pl01x: Add error value checking   André Przywara
• [PATCH] spi: migrate trace to dev and log macro in spi uclass   Patrick Delaunay
• [PATCH 00/33] stm32: enable logging features   Patrick DELAUNAY
• [PATCH] serial: pl01x: Add error value checking   Michal Simek
• [PATCH v3 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Michal Simek
• Speed/mode setting via "sf probe" command   Ralph Siemsen
• [PATCH 06/17] fs/squashfs: sqfs_read_directory_table: fix memory leak   Richard Genoud
• [PATCH] mmc: mtk-sd: change some dev_err into dev_dbg   Fabien Parent
• [PATCH 06/17] fs/squashfs: sqfs_read_directory_table: fix memory leak   Miquel Raynal
• [PATCH] usb: dwc2: add "u-boot,force-vbus-detection" for stm32   Patrick DELAUNAY
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Alper Nebi Yasak
• SMBIOS entry point   Heinrich Schuchardt
• [PATCH] usb: dwc2: add "u-boot,force-vbus-detection" for stm32   Marek Vasut
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Tom Rini
• SMBIOS entry point   Mark Kettenis
• [PATCH v3 00/27] Add DM support for omap PWM backlight   Dario Binacchi
• Please pull mmc-2020-10-14   Tom Rini
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Ley Foon Tan
• [PATCH v9 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
• [PATCH v9 1/2] board: kontron: add sl28 support   Michael Walle
• [PATCH v9 2/2] board: sl28: add board specific nvm command   Michael Walle
• [PATCH v3 1/2] clk: renesas: Add R8A774B1 clock tables   Marek Vasut
• [PATCH v3 2/2] clk: renesas: Add R8A774E1 clock tables   Marek Vasut
• [PATCH v3] pinctrl: renesas: pfc-r8a77990: Sync PFC tables with Linux 5.9   Marek Vasut
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Marek Vasut
• Missing license/copyright notice in zlib.h   Tom Rini
• [PATCH v2 2/3] allow positional arguments with "run" command   Rasmus Villemoes
• RPi3: serial console   Ricardo Salveti
• [PATCH v9] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH] mmc: mtk-sd: change some dev_err into dev_dbg   Peng Fan
• [PATCH 0/2] mmc: fsl_esdhc: fix up for eMMC HS400   Yangbo Lu
• [PATCH 1/2] mmc: fsl_esdhc: set sysctl register for clock initialization   Yangbo Lu
• [PATCH 2/2] mmc: fsl_esdhc: make sure delay chain locked for HS400   Yangbo Lu
• [PATCH v3 0/5] Add i2c support for MediaTek mt8512   mingming lee
• [PATCH v3 1/5] i2c: mediatek: add basic driver support   mingming lee
• [PATCH v3 2/5] ARM: dts: Mediatek: add i2c node support for mt8512   mingming lee
• [PATCH v3 3/5] configs: mt8512: Enable I2C related configs   mingming lee
• [PATCH v3 4/5] dt-binding: i2c: add bindings for mediatek i2c driver   mingming lee
• [PATCH v3 5/5] MAINTAINERS: add i2c driver to ARM MEDIATEK   mingming lee
• [PATCH next v10] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH 02/12] x86: zimage: Add a little more logging   Bin Meng
• [PATCH 03/12] x86: zimage: Sanity-check the kernel version before printing it   Bin Meng
• [PATCH 04/12] x86: zimage: Quieten down the zimage boot process   Bin Meng
• Missing license/copyright notice in zlib.h   Tan, Ley Foon
• i.MX RT1050 toolchain   Andy Pont
• [PATCH] board: stm32pm1: update USB-C power detection algorithm on DK boards   Patrice Chotard
• [PATCH] gadget: f_thor: fix wrong file size cast   Seung-Woo Kim
• [PATCH 00/18] Add support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 01/18] mips: dts: switch to board defines for dtb for mtmips   Weijie Gao
• [PATCH 02/18] mips: mtmips: move mt7628 related Kconfig into mt7628 subdirectory   Weijie Gao
• [PATCH 03/18] mips: mtmips: fix dram size detection in dram_init   Weijie Gao
• [PATCH 04/18] mips: mtmips: add support to initialize SDRAM   Weijie Gao
• [PATCH 05/18] mips: mtmips: add support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 06/18] mips: mtmips: add two reference boards for mt7620   Weijie Gao
• [PATCH 07/18] configs: mtmips: refresh for mt7628 based boards   Weijie Gao
• [PATCH 08/18] serial: add uart driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 09/18] clk: add clock driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 10/18] reset: mtmips: add reset controller support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 11/18] pinctrl: mtmips: add support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 12/18] watchdog: add watchdog driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 13/18] gpio: add GPIO controller driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 14/18] spi: add spi controller support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 15/18] phy: add USB PHY driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 16/18] net: add ethernet driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 17/18] mmc: mtk-sd: add pad control settings for MediaTek MT7620/MT76x8 SoCs   Weijie Gao
• [PATCH 18/18] MAINTAINERS: add maintainer for MediaTek MIPS platform   Weijie Gao
• [PATCH 0/3] Renesas R8A774C0 import DTSI and clocks   Lad Prabhakar
• [PATCH 1/3] arm: renesas: Add config option for R8A774C0 SoC   Lad Prabhakar
• [PATCH 2/3] arm: dts: r8a774c0: Import DTS from Linux 5.9   Lad Prabhakar
• [PATCH 3/3] clk: renesas: Import R8A774C0 clock tables from Linux 5.9   Lad Prabhakar
• [PATCH v2 00/14] vboot: Fix forged-configuration vulnerability   guoyujie (C)
• [PATCH 02/12] x86: zimage: Add a little more logging   Bin Meng
• [PATCH 12/18] watchdog: add watchdog driver for MediaTek MT7620 SoC   Qiang Zhao
• [PATCH] rtc: move pcf8563 to Kconfig   Heiko Schocher
• [PATCH v3 00/27] Add DM support for omap PWM backlight   Felix Brack
• [PATCH 00/18] Add support for MediaTek MT7620 SoC   Michal Suchánek
• [PATCH 01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb   Biwen Li
• [PATCH 02/15] arm: dts: ls1021a: add gpio node   Biwen Li
• [PATCH 03/15] arm64: dts: ls1012a: add gpio node   Biwen Li
• [PATCH 04/15] arm64: dts: ls1028a: add gpio node   Biwen Li
• [PATCH 05/15] arm64: dts: ls1043a: add gpio node   Biwen Li
• [PATCH 06/15] arm64: dts: ls1046a: add gpio node   Biwen Li
• [PATCH 07/15] arm64: dts: ls1088a: add gpio node   Biwen Li
• [PATCH 08/15] arm64: dts: ls208xa: add gpio node   Biwen Li
• [PATCH 09/15] configs: ls1012a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [PATCH 10/15] configs: ls1043a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [PATCH 11/15] configs: ls1028a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [PATCH 12/15] configs: ls1088a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [PATCH 13/15] configs: ls208xa: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [PATCH 14/15] configs: lx2160a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [PATCH 15/15] configs: ls1046a: enable MPC8XXX_GPIO   Biwen Li
• [PATCH 1/1] board: freescale: vid.c: Initialize variable 'i2caddress'   Priyanka Singh
• [PATCH 01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb   Biwen Li
• [PATCH] sunxi: make V3s DRAM initialization more proper   Icenowy Zheng
• [PATCH 01/32] Add an assembly guard around linux/bitops.h   Bin Meng
• [PATCH 02/32] x86: apl: Add core init for the SoC   Bin Meng
• [PATCH 03/32] x86: Add a layout for Chrome OS verified boot   Bin Meng
• [PATCH 04/32] x86: Add support for private files   Bin Meng
• [PATCH 05/32] x86: Allow writing tables to fail   Bin Meng
• [PATCH 06/32] x86: acpi: Store the ACPI context in global_data   Bin Meng
• [PATCH 07/32] x86: Store the FADT so we can avoid searching for it   Bin Meng
• [PATCH 08/32] x86: Don't bother clearing global NVS   Bin Meng
• [PATCH 09/32] x86: coral: Drop the duplicate PCIe settings   Bin Meng
• [PATCH 10/32] x86: Add SMBIOS info for Coral   Bin Meng
• efi_loader: DM_REMOVE_ACTIVE_ALL   Heinrich Schuchardt
• efi_loader: DM_REMOVE_ACTIVE_ALL   Ilias Apalodimas
• [PATCH v4 0/7] drivers: Add a framework for MUX drivers   Pratyush Yadav
• [PATCH v4 1/7] drivers: Add a new framework for multiplexer devices   Pratyush Yadav
• [PATCH v4 2/7] dm: board: complete the initialization of the muxes in initr_dm()   Pratyush Yadav
• [PATCH v4 3/7] drivers: mux: mmio-based syscon mux controller   Pratyush Yadav
• [PATCH v4 4/7] Kconfig: Increase the pre-relocation memory   Pratyush Yadav
• [PATCH v4 5/7] test: Add tests for the multiplexer framework   Pratyush Yadav
• [PATCH v4 6/7] cmd: Add a mux command   Pratyush Yadav
• [PATCH v4 7/7] test: mux-cmd: Add tests for the 'mux' command   Pratyush Yadav
• [PATCH v2 00/21] Add support for MMC higher speed modes for TI's am65x, j721e and j7200 platforms   Faiz Abbas
• [PATCH v2 01/21] mmc: sdhci: Add helper functions for UHS modes   Faiz Abbas
• [PATCH v2 02/21] mmc: am654_sdhci: Unconditionally switch off DLL in the beginning of ios_post()   Faiz Abbas
• [PATCH v2 03/21] mmc: am654_sdhci: Convert flag fields to BIT macro   Faiz Abbas
• [PATCH v2 04/21] mmc: am654_sdhci: Add flag for PHY calibration   Faiz Abbas
• [PATCH v2 05/21] mmc: am654_sdhci: Add support for AM65x SR2.0   Faiz Abbas
• [PATCH v2 06/21] mmc: am654_sdhci: Add support for input tap delay   Faiz Abbas
• [PATCH v2 07/21] mmc: am654_sdhci: Add support for writing to clkbuf_sel   Faiz Abbas
• [PATCH v2 08/21] mmc: am654_sdhci: Add support for software tuning   Faiz Abbas
• [PATCH v2 09/21] mmc: am654_sdhci: Fix HISPD bit configuration in some lower speed modes   Faiz Abbas
• [PATCH v2 10/21] mmc: am654_sdhci: Use sdhci_set_control_reg()   Faiz Abbas
• [PATCH v2 11/21] arm: dts: k3-am65: Fix mmc nodes   Faiz Abbas
• [PATCH v2 12/21] arm: dts: k3-j721e-main: Update otap-delay values   Faiz Abbas
• [PATCH v2 13/21] arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card   Faiz Abbas
• [PATCH v2 14/21] arm: dts: k3-j7200-main: Add support for gpio0   Faiz Abbas
• [PATCH v2 15/21] arm: dts: k3-j7200-common-proc-board: Enable support for UHS modes   Faiz Abbas
• [PATCH v2 16/21] configs: j721e_evm: Add support for UHS modes   Faiz Abbas
• [PATCH v2 17/21] configs: j7200_evm: Add support for UHS modes   Faiz Abbas
• [PATCH v2 18/21] i2c: Makefile: Add SPL_DM_I2C_GPIO   Faiz Abbas
• [PATCH v2 19/21] arm: dts: k3-am65-main: Add itapdly and clkbuf-sel values   Faiz Abbas
• [PATCH v2 20/21] arm: dts: k3-am654-base-board: Limit Sd card to High speed modes   Faiz Abbas
• [PATCH v2 21/21] configs: am65x_evm: Add configs for UHS modes   Faiz Abbas
• [PATCH next v10] usb: add MediaTek USB3 DRD driver   Marek Vasut
• [PATCH next v10] usb: add MediaTek USB3 DRD driver   Marek Vasut
• [PATCH 06/17] fs/squashfs: sqfs_read_directory_table: fix memory leak   Richard Genoud
• [PATCH 06/17] fs/squashfs: sqfs_read_directory_table: fix memory leak   Miquel Raynal
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Tom Rini
• [PATCH 1/3] arm: renesas: Add config option for R8A774C0 SoC   Marek Vasut
• [PATCH 2/3] arm: dts: r8a774c0: Import DTS from Linux 5.9   Marek Vasut
• [PATCH 3/3] clk: renesas: Import R8A774C0 clock tables from Linux 5.9   Marek Vasut
• [PATCH 0/3] pinctrl: renesas: trivial fixes and enhancements   Lad, Prabhakar
• [PATCH] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz, Foundries
• [PATCH 1/3] arm: fsl-layerscape: Include device_compat.h in soc.c   Tom Rini
• [PATCH 2/3] clk: at91: Include device_compat.h in compat.c   Tom Rini
• [PATCH 3/3] usb: dwc3: Include device_compat.h in dwc3-octeon-glue.c   Tom Rini
• [PATCH] rtc: move pcf8563 to Kconfig   Stefan Roese
• [PATCH 1/5] mips: start.S: Add Octeon boot header compatibility   Stefan Roese
• [PATCH 2/5] mips: octeon: Fix Octeon DDR driver to use the correct struct   Stefan Roese
• [PATCH 3/5] mips: octeon: Report full DDR size in dram_init() to gd->ram_size   Stefan Roese
• [PATCH 4/5] mips: octeon: bootoctlinux: Use gd->ram_size instead of ram_get_info()   Stefan Roese
• [PATCH 5/5] mips: octeon: tools: Add update_octeon_header tool   Stefan Roese
• [PATCH 1/5] mips: start.S: Add Octeon boot header compatibility   Mark Kettenis
• [PATCH 11/32] x86: coral: Correct max98357 file   Bin Meng
• [PATCH 12/32] x86: Move ROM_TABLE_ADDR into the C file   Bin Meng
• [PATCH 13/32] x86: Use if instead of #ifdef in write_tables()   Bin Meng
• [PATCH 14/32] x86: Allow putting some tables in the bloblist   Bin Meng
• [PATCH 15/32] x86: nhlt: Correct output of bytes and 16-bit data   Bin Meng
• [PATCH 16/32] x86: nhlt: Fix a few bugs in the table generation   Bin Meng
• [PATCH 17/32] x86: Show the interrupt pointer with 'irqinfo'   Bin Meng
• [PATCH 18/32] x86: sound: Correct error handling   Bin Meng
• [PATCH 19/32] acpi: Correct reset handling in acpi_device_add_power_res()   Bin Meng
• [PATCH 20/32] x86: acpi: Allow the SSDT to be empty   Bin Meng
• [PATCH 1/4] mmc: octeontx_hsmmc.c: Remove test debug message   Stefan Roese
• [PATCH 2/4] arm: octeontx: Select CLK   Stefan Roese
• [PATCH 3/4] watchdog: octeontx_wdt: Add support for start and stop   Stefan Roese
• [PATCH 4/4] arm: octeontx: Add CMD_WDT   Stefan Roese
• [PATCH] spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] sunxi: make V3s DRAM initialization more proper   André Przywara
• [PATCH 01/16] clk: sifive: Include device_compat.h   Tom Rini
• [PATCH 02/16] dm: syscon: Set LOG_CATEGORY   Tom Rini
• [PATCH 03/16] firmware: scmi: Include device_compat.h   Tom Rini
• [PATCH 04/16] mtd: mxs_nand: Fix not calling dev_xxx with a device   Tom Rini
• [PATCH 05/16] net: ldpaa_eth: Include device_compat.h   Tom Rini
• [PATCH 06/16] phy: Include device_compat.h   Tom Rini
• [PATCH 07/16] ram: imxrt: Include device_compat.h   Tom Rini
• [PATCH 08/16] spi: nxp_fspi: Include device_compat.h   Tom Rini
• [PATCH 09/16] spi: fsl_qspi: Include device_compat.h   Tom Rini
• [PATCH 10/16] tee: optee: Include device_compat.h   Tom Rini
• [PATCH 11/16] timer: Include device_compat.h   Tom Rini
• [PATCH 12/16] usb: xhci: Include device_compat.h   Tom Rini
• [PATCH 13/16] usb: musb-new: Include device_compat.h   Tom Rini
• [PATCH 14/16] usb: musb-new: mt85xx: Fix not calling dev_err with a device   Tom Rini
• [PATCH 1/3] arm: fsl-layerscape: Include device_compat.h in soc.c   Tom Rini
• [PATCH 2/3] clk: at91: Include device_compat.h in compat.c   Tom Rini
• [PATCH 3/3] usb: dwc3: Include device_compat.h in dwc3-octeon-glue.c   Tom Rini
• [PATCH 15/16] linux/compat.h: Remove redefinition of dev_xxx macros   Tom Rini
• [PATCH 16/16] dm: Don't undefine dev_xxx macros   Tom Rini
• [PATCH 10/16] tee: optee: Include device_compat.h   Igor Opaniuk
• [PATCH 21/32] x86: acpi: Put the generated code first in DSDT   Bin Meng
• [PATCH 22/32] acpi: Don't reset the tables with every new generation   Bin Meng
• [PATCH 23/32] x86: Define the Chrome OS GNVS region   Bin Meng
• [PATCH 24/32] x86: Use CONFIG_CHROMEOS_VBOOT for verified boot   Bin Meng
• [PATCH 25/32] x86: Set up Chrome OS to boot into developer mode   Bin Meng
• [PATCH 26/32] x86: Boot coral into Chrome OS by default   Bin Meng
• [PATCH 27/32] x86: fsp: Convert fsp_dram to use log_debug()   Bin Meng
• [PATCH 28/32] x86: Silence some logging statements   Bin Meng
• [PATCH 29/32] x86: acpi: Include the TPMv1 table only if needed   Bin Meng
• [PATCH 30/32] x86: acpi: Don't show the UART address by default   Bin Meng
• [PATCH 31/32] x86: pinctrl: Silence the warning when a pin is not found   Bin Meng
• [PATCH 32/32] x86: fsp: Adjust calculations for MTRR range and DRAM top   Bin Meng
• [PATCH v1 0/8] Microchip PolarFire SoC support   padmarao.begari at microchip.com
• [PATCH v1 1/8] riscv: Add Microchip MPFS Icicle Kit support   padmarao.begari at microchip.com
• [PATCH v1 2/8] riscv: dts: Add device tree for Microchip Icicle Kit   padmarao.begari at microchip.com
• [PATCH v1 3/8] dt-bindings: clock: Add indexes for reset signals   padmarao.begari at microchip.com
• [PATCH v1 4/8] riscv: Add DMA 64-bit address support   padmarao.begari at microchip.com
• [PATCH v1 5/8] net: macb: Add DMA 64-bit address support for macb   padmarao.begari at microchip.com
• [PATCH v1 6/8] net: macb: Add phy address to read it from device tree   padmarao.begari at microchip.com
• [PATCH v1 7/8] clk: Add Microchip PolarFire SoC clock driver   padmarao.begari at microchip.com
• [PATCH v1 8/8] doc: board: Add Microchip MPFS Icicle Kit doc   padmarao.begari at microchip.com
• [PATCH] libfdt: Fix signedness comparison warnings   Andre Przywara
• [PATCH 15/17] fs/squashfs: sqfs_read: fix memory leak   Richard Genoud
• [PATCH] libfdt: Fix signedness comparison warnings   Tom Rini
• [PATCH] libfdt: Fix signedness comparison warnings   Tom Rini
• [PATCH 0/5] board: mediatek: pumpkin: add fastboot support   Fabien Parent
• [PATCH 1/5] arm: dts: mt8516: add support for USB   Fabien Parent
• [PATCH 2/5] arm: dts: mt8516-pumpkin: enable usb port   Fabien Parent
• [PATCH 3/5] board: mediatek: pumpkin: initialize usb device   Fabien Parent
• [PATCH 4/5] configs: pumpkin: enable USB gadget   Fabien Parent
• [PATCH 5/5] configs: pumpkin: enable fastboot   Fabien Parent
• [PATCH v2] armv8: layerscape: don't remove crypto node if just partially disabled   Horia Geantă
• [PATCH] usb: dwc2: add "u-boot,force-vbus-detection" for stm32   Patrick DELAUNAY
• i.MX RT1050 toolchain   Giulio Benetti
• [PATCH v2 0/5] sunxi: video: Add V3S simple-framebuffer   Martin Cerveny
• [PATCH v2 1/5] ARM: dts: sun8i: Update V3s dts(i) files from Linux-v5.9   Martin Cerveny
• [PATCH v2 2/5] ARM: dts: sun8i: v3s: Add simple-framebuffer   Martin Cerveny
• [PATCH v2 3/5] pwm: sunxi: v3s: Enable PWM0   Martin Cerveny
• [PATCH v2 4/5] sunxi: video: v3s: Enable LCD support   Martin Cerveny
• [PATCH v2 5/5] sunxi: add drivers and configs needed for LCD display   Martin Cerveny
• [PATCH v3] armv8: layerscape: don't remove crypto node if just partially disabled   Michael Walle
• [PATCH] tools: mtk_image: add support for booting ARM64 images   Fabien Parent
• [PATCH v3 00/27] Add DM support for omap PWM backlight   Dario Binacchi
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v4 00/13] riscv: Add SPI support for Kendryte K210   Sean Anderson
• [PATCH v4 01/13] spi: dw: Fix driving MOSI low while recieving   Sean Anderson
• [PATCH v4 02/13] spi: dw: Convert calls to debug to dev_*   Sean Anderson
• [PATCH v4 03/13] spi: dw: Rename "cs-gpio" to "cs-gpios"   Sean Anderson
• [PATCH v4 04/13] spi: dw: Use generic function to read reg address   Sean Anderson
• [PATCH v4 05/13] spi: dw: Rename registers to match datasheet   Sean Anderson
• [PATCH v4 06/13] spi: dw: Remove spi_enable_chip   Sean Anderson
• [PATCH v4 07/13] spi: dw: Rearrange struct dw_spi_priv   Sean Anderson
• [PATCH v4 08/13] spi: dw: Add SoC-specific compatible strings   Sean Anderson
• [PATCH v4 09/13] spi: dw: Add support for multiple CTRLR0 layouts   Sean Anderson
• [PATCH v4 10/13] spi: dw: Document devicetree binding   Sean Anderson
• [PATCH v4 11/13] spi: dw: Add mem_ops   Sean Anderson
• [PATCH v4 12/13] riscv: Add device tree bindings for SPI   Sean Anderson
• [PATCH v4 13/13] riscv: Add support for SPI on Kendryte K210   Sean Anderson
• [PATCH 1/1] trace: conserve gd register on RISC-V   Heinrich Schuchardt
• [PATCH v1 0/8] Microchip PolarFire SoC support   Anup Patel
• [PATCH v1 2/8] riscv: dts: Add device tree for Microchip Icicle Kit   Anup Patel
• [PATCH v1 3/8] dt-bindings: clock: Add indexes for reset signals   Anup Patel
• [PATCH v1 8/8] doc: board: Add Microchip MPFS Icicle Kit doc   Anup Patel
• [PATCH] clk: mediatek: Add MT8183 clock driver   Fabien Parent
• am335x uart boot   Matwey V. Kornilov
• [BUG] sandbox_defconfig fails to build with origin/master dadc1e38306b1c3   Heinrich Schuchardt
• [PATCH 1/1] test: fix build failure for syslog_test   Heinrich Schuchardt
• [BUG] sandbox_defconfig fails to build with origin/master dadc1e38306b1c3   Heinrich Schuchardt
• [BUG] sandbox_defconfig fails to build with origin/master dadc1e38306b1c3   Tom Rini
• [PATCH v2 0/3] log: allow for message continuation   Heinrich Schuchardt
• [PATCH v2 1/3] log: move processing_msg to global data   Heinrich Schuchardt
• [PATCH v2 2/3] log: allow for message continuation   Heinrich Schuchardt
• [PATCH v2 3/3] test: log: test message continuation   Heinrich Schuchardt
• [PATCH] mmc: Add some helper functions for retrying on error   Sean Anderson
• [BUG] sandbox_defconfig fails to build with origin/master dadc1e38306b1c3   Heinrich Schuchardt
• i.MX RT1050 toolchain   Andy Pont
• [BUG] sandbox_defconfig fails to build with origin/master dadc1e38306b1c3   Tom Rini
• [PATCH] test: Fix sandbox tests failing to build   Tom Rini
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• [PATCH] test: log: Actually test enable/disable output   Sean Anderson
• [PATCH 1/1] Makefile: consistent include path for out of tree build   Heinrich Schuchardt
• [BUG] sandbox_defconfig fails to build with origin/master dadc1e38306b1c3   Heinrich Schuchardt
• [PATCH 1/1] Makefile: consistent include path for out of tree build   Tom Rini
• [PATCH 1/1] Makefile: consistent include path for out of tree build   Heinrich Schuchardt
• [PATCH 1/1] Makefile: consistent include path for out of tree build   Tom Rini
• [PATCH v3 00/23] log: Add commands for manipulating filters   Sean Anderson
• [PATCH v3 01/23] log: Fix missing negation of ENOMEM   Sean Anderson
• [PATCH v3 02/23] log: Fix incorrect documentation of log_filter.cat_list   Sean Anderson
• [PATCH v3 03/23] log: Add additional const qualifier to arrays   Sean Anderson
• [PATCH v3 04/23] log: Add new category names to log_cat_name   Sean Anderson
• [PATCH v3 05/23] log: Use CONFIG_IS_ENABLED() for LOG_TEST   Sean Anderson
• [PATCH v3 06/23] log: Expose some helper functions   Sean Anderson
• [PATCH v3 07/23] log: Add function to create a filter with flags   Sean Anderson
• [PATCH v3 08/23] log: Add filter flag to deny on match   Sean Anderson
• [PATCH v3 09/23] test: log: Convert log_test from python to C   Sean Anderson
• [PATCH v3 10/23] test: log: Give tests names instead of numbers   Sean Anderson
• [PATCH v3 11/23] test: Add tests for LOGFF_DENY   Sean Anderson
• [PATCH v3 12/23] log: Add filter flag to match greater than a log level   Sean Anderson
• [PATCH v3 13/23] test: Add test for LOGFF_MIN   Sean Anderson
• [PATCH v3 14/23] cmd: log: Use sub-commands for log   Sean Anderson
• [PATCH v3 15/23] cmd: log: Split off log level parsing   Sean Anderson
• [PATCH v3 16/23] cmd: log: Add commands to list categories and drivers   Sean Anderson
• [PATCH v3 17/23] cmd: log: Make "log level" print all log levels   Sean Anderson
• [PATCH v3 18/23] lib: Add getopt   Sean Anderson
• [PATCH v3 19/23] test: Add a test for getopt   Sean Anderson
• [PATCH v3 20/23] cmd: log: Add commands to manipulate filters   Sean Anderson
• [PATCH v3 21/23] test: Add a test for log filter-*   Sean Anderson
• [PATCH v3 22/23] doc: Add log kerneldocs to documentation   Sean Anderson
• [PATCH v3 23/23] doc: Update logging documentation   Sean Anderson
• [PATCH v4 13/13] riscv: Add support for SPI on Kendryte K210   Sean Anderson
• [PATCH v1 1/8] riscv: Add Microchip MPFS Icicle Kit support   Sean Anderson
• [PATCH v1 2/8] riscv: dts: Add device tree for Microchip Icicle Kit   Sean Anderson
• [PATCH] rockchip: rk3399: Add Nanopi M4V2 board support   Shuying Li
• i.MX RT1050 toolchain   Giulio Benetti
• RPi3b, U-Boot, EFI and Serial Input   Anthony Davies
• RPi3b, U-Boot, EFI and Serial Input   Michal Suchánek
• i.MX RT1050 toolchain   Andy Pont
• [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Baruch Siach
• [PATCH v2 1/5] arm: dts: armada-cp110-slave: add missing cps_nand   Baruch Siach
• [PATCH v2 2/5] arm: dts: armada-cp110-master: update nand-controller   Baruch Siach
• [PATCH v2 3/5] mtd: pxa3xx_nand: port to use driver model   Baruch Siach
• [PATCH v2 4/5] mtd: pxa3xx_nand: remove dead code   Baruch Siach
• [PATCH v2 5/5] mtd: nand: pxa3xx: enable NAND controller if the SoC needs it   Baruch Siach
• [PATCH 0/3] phy: marvell: cp110: fix Armada 8k rev B0 boot hang   Baruch Siach
• [PATCH 1/3] phy: marvell: cp110: let the firmware configure the comphy   Baruch Siach
• [PATCH 2/3] phy: marvell: cp110: let the firmware configure comphy for PCIe   Baruch Siach
• [PATCH 3/3] phy: marvell: cp110: update mode parameter for pcie power on calls   Baruch Siach
• i.MX RT1050 toolchain   Giulio Benetti
• [PATCH] arm: sunxi: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] at91sam9: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] at91sam9n12ek: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] eb_cpu5282: fix CONFIG_DM_VIDEO build warnings   Anatolij Gustschin
• [PATCH] imx: mx6sxsabresd: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] imx: mx7dsabresd: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] ls1021aqds: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] ls1021atwr: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] mx23evk: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] picosam9g45: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] sansa_fuze_plus: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] xfi3: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH 1/3] phy: marvell: cp110: let the firmware configure the comphy   Marek Behun
• [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Chris Packham
• Please pull u-boot-video   Anatolij Gustschin
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• [PATCH] gadget: f_thor: fix wrong file size cast   Jaehoon Chung
• [PATCH 00/18] Add support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH 12/18] watchdog: add watchdog driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Tom Rini
• [PATCH next v10] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• RPi3b, U-Boot, EFI and Serial Input   Anthony Davies
• [PATCH 00/25] binman: Support compression of sections   Simon Glass
• [PATCH 01/25] binman: Give a sensible error if no command is given   Simon Glass
• [PATCH 02/25] binman: Fix return from u-boot-ucode if there is no DT   Simon Glass
• [PATCH 03/25] binman: Remove references to 'image' in entry_Section   Simon Glass
• [PATCH 04/25] binman: Expand the error message for breaching a section   Simon Glass
• [PATCH 05/25] binman: Move CompressData() into Entry base class   Simon Glass
• [PATCH 06/25] binman: Use 'files-compress' to set compression for files   Simon Glass
• [PATCH 07/25] binman: Update testPackExtra with more checks   Simon Glass
• [PATCH 08/25] binman: Expand docs and test for padding   Simon Glass
• [PATCH 09/25] binman: Expand docs and test for alignment   Simon Glass
• [PATCH 10/25] binman: Move section-building code into a function   Simon Glass
• [PATCH 11/25] binman: Refactor _BuildSectionData()   Simon Glass
• [PATCH 12/25] binman: Move section padding to the parent   Simon Glass
• [PATCH 13/25] binman: Make section padding consistent with other entries   Simon Glass
• [PATCH 14/25] binman: Store the original data before compression   Simon Glass
• [PATCH 15/25] binman: Set section contents in GetData()   Simon Glass
• [PATCH 16/25] binman: Avoid reporting image-pos with compression   Simon Glass
• [PATCH 17/25] binman: Drop Entry.CheckOffset()   Simon Glass
• [PATCH 18/25] binman: Move sort and expand to the main Pack() function   Simon Glass
• [PATCH 19/25] binman: Drop the Entry.CheckSize() method   Simon Glass
• [PATCH 20/25] binman: Call CheckSize() from the section's Pack() method   Simon Glass
• [PATCH 21/25] binman: Drop CheckEntries()   Simon Glass
• [PATCH 22/25] binman: Update CheckEntries() for compressed sections   Simon Glass
• [PATCH 23/25] binman: Use the actual contents in CheckSize()   Simon Glass
• [PATCH 24/25] binman: Support compression of sections   Simon Glass
• [PATCH 25/25] binman: Avoid calculated section data repeatedly   Simon Glass
• [PATCH next] usb: mtu3: fix build warning/error   Chunfeng Yun
• [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Baruch Siach
• [PATCH] arm: octeontx: Enable network support in supported boards   Stefan Roese
• [PATCH next] usb: mtu3: fix build warning/error   Marek Vasut
• SMBIOS entry point   Michal Simek
• [PATCH v3 0/8] add SAM9X60 clock support   Eugen.Hristev at microchip.com
• [PATCH 1/2] clk: at91: clk-master: add 5th divisor for mck master   Eugen.Hristev at microchip.com
• [PATCH] ARM: at91: Add chip ID for SAM9X60 SiP   Eugen.Hristev at microchip.com
• [PATCH v3] armv8: layerscape: don't remove crypto node if just partially disabled   Horia Geantă
• [PATCH] mx6: peripheral clock from oscillator   Peng Fan
• [PATCH v2 00/21] Add support for MMC higher speed modes for TI's am65x, j721e and j7200 platforms   Peng Fan
• [PATCH v2 2/3] allow positional arguments with "run" command   Wolfgang Denk
• [PULL] u-boot-atmel-2021.01-b   Eugen.Hristev at microchip.com
• [PATCH v2] drivers: serial: probe all uart devices   Vabhav Sharma (OSS)
• [PATCH v2 2/3] allow positional arguments with "run" command   Rasmus Villemoes
• [PATCH v2 2/5] ARM: dts: sun8i: v3s: Add simple-framebuffer   Maxime Ripard
• [PATCH v2 2/3] allow positional arguments with "run" command   Wolfgang Denk
• [PATCH] arm: sunxi: disable obsolete VIDEO config   Maxime Ripard
• [PATCH v1 0/8] Microchip PolarFire SoC support   Padmarao Begari
• [PATCH v1 8/8] doc: board: Add Microchip MPFS Icicle Kit doc   Padmarao Begari
• [PATCH v1 1/8] riscv: Add Microchip MPFS Icicle Kit support   Padmarao Begari
• [PATCH v2 4/5] sunxi: video: v3s: Enable LCD support   Maxime Ripard
• [PATCH v2 5/5] sunxi: add drivers and configs needed for LCD display   Maxime Ripard
• [PATCH v1 2/8] riscv: dts: Add device tree for Microchip Icicle Kit   Padmarao Begari
• [PATCH v1 2/8] riscv: dts: Add device tree for Microchip Icicle Kit   Padmarao Begari
• [PATCH next] usb: mtu3: fix build warning/error   Chunfeng Yun
• [PATCH] dm: core: add function uclass_probe_all() to probe all devices   Vabhav Sharma
• [PATCH v1 3/8] dt-bindings: clock: Add indexes for reset signals   Padmarao Begari
• [PATCH v3] drivers: serial: probe all uart devices   Vabhav Sharma
• [PATCH v3] drivers: serial: probe all uart devices   Stefan Roese
• [PATCH] dm: core: add function uclass_probe_all() to probe all devices   Stefan Roese
• [PATCH next] usb: mtu3: fix build warning/error   Marek Vasut
• [PATCH 01/18] mips: dts: switch to board defines for dtb for mtmips   Stefan Roese
• [PATCH 02/18] mips: mtmips: move mt7628 related Kconfig into mt7628 subdirectory   Stefan Roese
• [PATCH 03/18] mips: mtmips: fix dram size detection in dram_init   Stefan Roese
• [PATCH 07/18] configs: mtmips: refresh for mt7628 based boards   Stefan Roese
• [PATCH 18/18] MAINTAINERS: add maintainer for MediaTek MIPS platform   Stefan Roese
• [PATCH next] usb: mtu3: fix build error caused by dev_xxx()   Chunfeng Yun
• [PATCH next] usb: mtu3: fix build warning/error   Chunfeng Yun
• [PATCH] mx6: peripheral clock from oscillator   Fabio Estevam
• [PATCH] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz, Foundries
• [PATCH 00/11] bootm: Support substitions in bootargs and add tests   Simon Glass
• [PATCH 01/11] env: Allow returning errors from hdelete_r()   Simon Glass
• [PATCH 02/11] bootm: Add tests for fixup_silent_linux()   Simon Glass
• [PATCH 03/11] bootm: Update fixup_silent_linux() to return an error   Simon Glass
• [PATCH 04/11] bootm: Rename fixup_silent_linux()   Simon Glass
• [PATCH 05/11] bootm: Add a bool parameter to bootm_process_cmdline_env()   Simon Glass
• [PATCH 06/11] bootm: Use size rather than length for CONSOLE_ARG   Simon Glass
• [PATCH 07/11] bootm: Split out bootargs environment reading / writing   Simon Glass
• [PATCH 08/11] bootm: Update bootm_process_cmdline_env() to use flags   Simon Glass
• [PATCH 09/11] bootm: Allow updating the bootargs in a buffer   Simon Glass
• [PATCH 10/11] x86: zimage: Add silent-console processing   Simon Glass
• [PATCH 11/11] bootm: Support string substitution in bootargs   Simon Glass
• [PATCH v2] serial: pl01x: Add error value checking   Michal Simek
• [PATCH v2] spi: zynq_spi: Use clk subsystem to get reference spi clk   Michal Simek
• [PATCH v2] spi: zynq_qspi: Use clk subsystem to get reference qspi clk   Michal Simek
• [PATCH] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz
• [PATCH] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz, Foundries
• [PATCH v4 0/2] Add support for loading images above 4GB   Michal Simek
• [PATCH v4 1/2] spl: Use standard FIT entries   Michal Simek
• [PATCH v4 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Michal Simek
• [PATCH 00/11] bootm: Support substitions in bootargs and add tests   Heinrich Schuchardt
• [PATCH 11/11] bootm: Support string substitution in bootargs   Rasmus Villemoes
• [PATCH 07/11] bootm: Split out bootargs environment reading / writing   Wolfgang Denk
• [PATCH 09/11] bootm: Allow updating the bootargs in a buffer   Wolfgang Denk
• [PATCH] arm: sunxi: disable obsolete VIDEO config   Tom Rini
• [PATCH 11/11] bootm: Support string substitution in bootargs   Wolfgang Denk
• [PATCH 11/11] bootm: Support string substitution in bootargs   Michael Walle
• [PATCH 11/11] bootm: Support string substitution in bootargs   Simon Glass
• [PATCH 11/11] bootm: Support string substitution in bootargs   Simon Glass
• [PATCH 11/11] bootm: Support string substitution in bootargs   Simon Glass
• [PATCH v4 00/27] Add DM support for omap PWM backlight   Dario Binacchi
• [PATCH v4 01/27] clk: export generic routines   Dario Binacchi
• [PATCH v4 02/27] dt-bindings: bus: ti-sysc: resync with Linux 5.9-rc7   Dario Binacchi
• [PATCH v4 03/27] bus: ti: add minimal sysc interconnect target driver   Dario Binacchi
• [PATCH v4 04/27] arm: dts: sync am33xx with Linux 5.9-rc7   Dario Binacchi
• [PATCH v4 05/27] clk: add clk_round_rate()   Dario Binacchi
• [PATCH v4 06/27] clk: ti: add mux clock driver   Dario Binacchi
• [PATCH v4 07/27] arm: ti: am33xx: add DPLL_EN_FAST_RELOCK_BYPASS macro   Dario Binacchi
• [PATCH v4 08/27] clk: ti: am33xx: add DPLL clock drivers   Dario Binacchi
• [PATCH v4 09/27] clk: ti: add divider clock driver   Dario Binacchi
• [PATCH v4 10/27] clk: ti: add gate clock driver   Dario Binacchi
• [PATCH v4 11/27] ti: am33xx: fix do_enable_clocks() to accept NULL parameters   Dario Binacchi
• [PATCH v4 12/27] clk: ti: add support for clkctrl clocks   Dario Binacchi
• [PATCH v4 13/27] clk: ti: move drivers to 'ti' directory   Dario Binacchi
• [PATCH v4 14/27] clk: ti: omap4: add clock manager driver   Dario Binacchi
• [PATCH v4 15/27] clk: ti: am335x: add clock manager driver   Dario Binacchi
• [PATCH v4 16/27] fdt: translate address if #size-cells = <0>   Dario Binacchi
• [PATCH v4 17/27] omap: timer: fix the rate setting   Dario Binacchi
• [PATCH v4 18/27] misc: am33xx: add control module driver   Dario Binacchi
• [PATCH v4 19/27] pwm: ti: am33xx: add enhanced pwm driver   Dario Binacchi
• [PATCH v4 20/27] bus: ti: am33xx: add pwm subsystem driver   Dario Binacchi
• [PATCH v4 21/27] dm: core: add a function to decode display timings   Dario Binacchi
• [PATCH v4 22/27] video: omap: add panel driver   Dario Binacchi
• [PATCH v4 23/27] video: omap: drop domain clock enabling by SOC api   Dario Binacchi
• [PATCH v4 24/27] video: omap: set LCD clock rate through DM API   Dario Binacchi
• [PATCH v4 25/27] video: omap: split the legacy code from the DM code   Dario Binacchi
• [PATCH v4 26/27] video: omap: move drivers to 'ti' directory   Dario Binacchi
• [PATCH v4 27/27] board: ti: am335x-ice: get CDCE913 clock device   Dario Binacchi
• [PATCH v1] arm: socfpga: fix Gen5 enable of EMAC via FPGA   Ralph Siemsen
• [PATCH v3 0/2] dm: core: drivers: add function uclass_probe_all()   Vabhav Sharma
• [PATCH v3 1/2] dm: core: add function uclass_probe_all() to probe all devices   Vabhav Sharma
• [PATCH v3 2/2] drivers: serial: probe all uart devices   Vabhav Sharma
• [PATCH] dm: core: add function uclass_probe_all() to probe all devices   Vabhav Sharma (OSS)
• [PATCH 06/25] binman: Use 'files-compress' to set compression for files   Alper Nebi Yasak
• [PATCH 10/25] binman: Move section-building code into a function   Alper Nebi Yasak
• [PATCH 16/25] binman: Avoid reporting image-pos with compression   Alper Nebi Yasak
• Please pull u-boot-video   Tom Rini
• [PULL] u-boot-atmel-2021.01-b   Tom Rini
• [PATCH 0/2] PWM backlight patches from 'Add DM support for omap PWM backlight' series   Anatolij Gustschin
• [PATCH 1/2] video: dw-mipi-dsi: driver-specific configuration of phy timings   Anatolij Gustschin
• [PATCH 2/2] video: dw-mipi-dsi: permit configuring the escape clock rate   Anatolij Gustschin
• [PATCH 1/3] configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs   Anatolij Gustschin
• [PATCH 2/3] configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs   Anatolij Gustschin
• [PATCH 3/3] configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs   Anatolij Gustschin
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Marek Vasut
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH v2] video: Add copy_fb_to_hw op   Anatolij Gustschin
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Reuben Dowle
• [PATCH 1/2] mmc: fsl_esdhc: set sysctl register for clock initialization   Jaehoon Chung
• [PATCH 2/2] mmc: fsl_esdhc: make sure delay chain locked for HS400   Jaehoon Chung
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH v3 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   André Przywara
• [PATCH next] usb: mtu3: fix build error caused by dev_xxx()   Marek Vasut
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Reuben Dowle
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Tom Rini
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Tom Rini
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Reuben Dowle
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Alex G.
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Reuben Dowle
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Reuben Dowle
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Alex G.
• [PATCH v1] arm: socfpga: fix Gen5 enable of EMAC via FPGA   Tan, Ley Foon
• [PATCH next] usb: mtu3: fix build error caused by dev_xxx()   Chunfeng Yun
• [v2, 0/2] mmc: fsl_esdhc: fix up for eMMC HS400   Yangbo Lu
• [v2, 1/2] mmc: fsl_esdhc: set sysctl register for clock initialization   Yangbo Lu
• [v2, 2/2] mmc: fsl_esdhc: make sure delay chain locked for HS400   Yangbo Lu
• [PATCH 2/2] mmc: fsl_esdhc: make sure delay chain locked for HS400   Y.b. Lu
• U-Boot mtest Failure (read/write)   Embedded Engineer
• [PATCH] riscv: fu540: dts: Correct reg size of clint node   Pragnesh Patel
• [PATCH] riscv: fu540: dts: Correct reg size of clint node   Bin Meng
• [PATCH next] usb: mtu3: fix build error caused by dev_xxx()   Bin Meng
• [PATCH v4 23/27] video: omap: drop domain clock enabling by SOC api   Lokesh Vutla
• [PATCH v2 0/4] arm: zynqmp: Add zynqmp specific command for security features   Michal Simek
• [PATCH v2 1/4] arm64: zynqmp: Add support for encryption and decryption on data blob   Michal Simek
• [PATCH v2 2/4] arm64: zynqmp: Add support for RSA command   Michal Simek
• [PATCH v2 3/4] arm64: zynqmp: Add support for SHA3 command   Michal Simek
• [PATCH v2 4/4] arm64: zynqmp: Add support for saving sha3 key to different address   Michal Simek
• [PATCH v4 13/27] clk: ti: move drivers to 'ti' directory   Lokesh Vutla
• [PATCH 2/2] mmc: fsl_esdhc: make sure delay chain locked for HS400   Jaehoon Chung
• [PATCH next] usb: mtu3: fix build error caused by dev_xxx()   Chunfeng Yun
• [PATCH v3 1/2] armv8: lx2162a: Add Soc changes to support LX2162A   Y.b. Lu
• [PATCH] xilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board Kconfig   Michal Simek
• [PATCH 1/3] phy: marvell: cp110: let the firmware configure the comphy   Stefan Roese
• [PATCH 0/3] phy: marvell: cp110: fix Armada 8k rev B0 boot hang   Stefan Roese
• [PATCH v2] cmd: fat: Use do_save() for fatwrite   Lad Prabhakar
• [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Stefan Roese
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH] configs: ls1088a: enable CMD_MDIO   Ioana Ciornei
• [PATCH 0/3] phy: marvell: cp110: fix Armada 8k rev B0 boot hang   Baruch Siach
• [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Baruch Siach
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• [PATCH] usb: dwc2: add "u-boot,force-vbus-detection" for stm32   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH 3/4] common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image   Jaehoon Chung
• [PATCH 3/4] common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image   Tero Kristo
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH 3/4] common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image   Jaehoon Chung
• [PATCH 11/11] bootm: Support string substitution in bootargs   Wolfgang Denk
• [PATCH 11/11] bootm: Support string substitution in bootargs   Wolfgang Denk
• [PATCH 11/11] bootm: Support string substitution in bootargs   Wolfgang Denk
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Tom Rini
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Tom Rini
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Tom Rini
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Alex G.
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Marek Vasut
• [PATCH 0/4] Add support for I2C Legacy/FRU decoding   Michal Simek
• [PATCH 1/4] xilinx: common: Add Makefile to common folder   Michal Simek
• [PATCH 2/4] xilinx: cmd: Add support for FRU commands   Michal Simek
• [PATCH 3/4] xilinx: cmd: Add basic fru format generator   Michal Simek
• [PATCH 4/4] xilinx: board: Add FRU decoder support   Michal Simek
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Tom Rini
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Alex G.
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Tom Rini
• [PATCH 09/11] bootm: Allow updating the bootargs in a buffer   Simon Glass
• [PATCH 00/11] bootm: Support substitions in bootargs and add tests   Simon Glass
• [PATCH 07/11] bootm: Split out bootargs environment reading / writing   Simon Glass
• [PATCH 11/11] bootm: Support string substitution in bootargs   Simon Glass
• [PATCH 11/11] bootm: Support string substitution in bootargs   Simon Glass
• [PATCH 1/2] dm: core: Add late driver remove option   Marek Vasut
• [PATCH 1/2] dm: core: Add late driver remove option   Marek Vasut
• [PATCH 1/2] dm: core: Add late driver remove option   Tom Rini
• [PATCH 1/2] dm: core: Add late driver remove option   Marek Vasut
• [PATCH 1/3] riscv: Add timer_get_us() for tracing   Rick Chen
• [PATCH] riscv: fu540: dts: Correct reg size of clint node   Rick Chen
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Tan, Ley Foon
• [PATCH] bootm: fix wrong conditions about images overlap   Jaehoon Chung
• Pull request for UEFI sub-system for efi-2021-01-rc1 (2)   Heinrich Schuchardt
• [PATCH 0/7] dwc3-generic: Add Layerscape support   Ran Wang
• [PATCH 1/7] usb: dwc3: Add frame length adjustment quirk   Ran Wang
• [PATCH 2/7] usb: dwc3: add disable receiver detection in P3 quirk   Ran Wang
• [PATCH 3/7] usb: dwc3: Enable undefined length INCR burst type   Ran Wang
• [PATCH 4/7] usb: dwc3-generic: fix dwc3_setup_phy() return -ENOTSUPP causing init failure   Ran Wang
• [PATCH 5/7] usb: dwc3-generic: Add support for the layerscape   Ran Wang
• [PATCH 6/7] configs: ls1088a: add usb mass storage (device mode) support   Ran Wang
• [PATCH 7/7] arm: dts: ls1088a: change dwc3 compatible to match dwc3-generic driver   Ran Wang
• [PATCH 09/11] bootm: Allow updating the bootargs in a buffer   Wolfgang Denk
• [PATCH 07/11] bootm: Split out bootargs environment reading / writing   Wolfgang Denk
• [PATCH 1/7] usb: dwc3: Add frame length adjustment quirk   Marek Vasut
• [PATCH 11/11] bootm: Support string substitution in bootargs   Wolfgang Denk
• [PATCH 0/7] dwc3-generic: Add Layerscape support   Marek Vasut
• [PATCH 1/7] usb: dwc3: Add frame length adjustment quirk   Ran Wang
• [PATCH] efi_loader: Disable devices before handing over control   Ilias Apalodimas
• [PATCH] riscv: k210: Reduce DMA block size   Rick Chen
• [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Patrick DELAUNAY
• [PATCH v2 2/2] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrick DELAUNAY
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• [PATCH] board: stm32pm1: update USB-C power detection algorithm on DK boards   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Do not set eth1addr if KS8851 has EEPROM   Patrick DELAUNAY
• [PATCH 0/7] dwc3-generic: Add Layerscape support   Ran Wang
• [PATCH] ARM: mx6: add support for USB armory Mk II board   andrej.rosano at f-secure.com
• [PATCH v2 0/6] dwc3-generic: Add Layerscape support   Ran Wang
• [PATCH v2 1/6] usb: dwc3: Add frame length adjustment quirk   Ran Wang
• [PATCH v2 2/6] usb: dwc3: Enable undefined length INCR burst type   Ran Wang
• [PATCH v2 3/6] usb: dwc3-generic: fix dwc3_setup_phy() return -ENOTSUPP causing init failure   Ran Wang
• [PATCH v2 4/6] usb: dwc3-generic: Add support for the layerscape   Ran Wang
• [PATCH v2 5/6] configs: ls1088a: add usb mass storage (device mode) support   Ran Wang
• [PATCH v2 6/6] arm: dts: ls1088a: change dwc3 compatible to match dwc3-generic driver   Ran Wang
• [PATCH] efi_loader: Disable devices before handing over control   Heinrich Schuchardt
• [PATCH 0/4] xilinx: zynqmp: Fixes for silicon ID detection   Michal Simek
• [PATCH 1/4] xilinx: zynqmp: Check return value from xilinx_pm_request()   Michal Simek
• [PATCH 2/4] xilinx: zynqmp: Fix debug message in zynqmp_get_silicon_idcode_name()   Michal Simek
• [PATCH 3/4] xilinx: zynqmp: Do not check 0 as invalid return from snprintf   Michal Simek
• [PATCH 4/4] xilinx: zynqmp: Use tab for macro indentation   Michal Simek
• [PATCH v2 01/21] mmc: sdhci: Add helper functions for UHS modes   Jaehoon Chung
• [PATCH] efi_loader: Disable devices before handing over control   Ilias Apalodimas
• [PATCH 1/3] reset: stm32: Add support of MCU HOLD BOOT   Patrice CHOTARD
• [PATCH 2/3] remoteproc: stm32: use reset for hold boot   Patrice CHOTARD
• [PATCH 3/3] remoteproc: stm32: update error management in stm32_copro_start   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: stm32mp1: no MTD partitions fixup for serial boot   Patrice CHOTARD
• [PATCH] phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off   Patrice CHOTARD
• [PATCH] usb: dwc2: add "u-boot,force-vbus-detection" for stm32   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ELF   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] configs: stm32mp15: activate CMD_IMPORTENV   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/2] configs: stm32mp15: activate CMD_EXPORTENV   Patrice CHOTARD
• [PATCH] stm32mp: stm32prog: accept device without partition   Patrice CHOTARD
• [PATCH] MAINTAINERS: Add stm32 and stm regexp for ARM STM STM32MP platform   Patrice CHOTARD
• [PATCH] MAINTAINERS: Add STM32MP1 RNG driver in stm32mp platform   Patrice CHOTARD
• [PATCH] arm: stm32: cleanup arch gpio.h   Patrice CHOTARD
• [PATCH 01/33] arm: stm32mp: migrate trace to log macro   Patrice CHOTARD
• [PATCH 02/33] arm: stm32mp: migrate cmd_stm32prog to log macro   Patrice CHOTARD
• [PATCH 03/33] arm: stm32mp: bsec: migrate trace to log macro   Patrice CHOTARD
• [PATCH v2] ARM: stm32: Use firmware property instead of loadables   Patrice CHOTARD
• [PATCH v2] usb: dwc3: Handle case where setup_phy is not needed   Michal Simek
• [PATCH 05/33] gpio: stm32-gpio: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 06/33] remoproc: stm32: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 07/33] ram: stm32: migrate trace to log macro   Patrice CHOTARD
• [PATCH 08/33] ram: stm32mp1: migrate trace to dev or log macro   Patrice CHOTARD
• [PATCH 09/33] mmc: stm32_sdmmc2: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 10/33] timer: stm32: migrate trace to log macro   Patrice CHOTARD
• [PATCH 11/33] hwspinlock: stm32: migrate trace to log macro   Patrice CHOTARD
• [PATCH 12/33] rtc: stm32: migrate trace to log macro   Patrice CHOTARD
• [PATCH 13/33] watchdog: stm32mp: migrate trace to dev macro   Patrice CHOTARD
• [PATCH 14/33] power: regulator: stm32-verfbuf: define LOG_CATEGORY   Patrice CHOTARD
• [PATCH 15/33] misc: rcc: migrate trace to dev macro   Patrice CHOTARD
• [PATCH 16/33] misc: rcc: keep the rcc device name for subnode   Patrice CHOTARD
• [PATCH 17/33] clk: stm32mp1: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH] usb: gadget: dwc2_udc_otg: return zero when reset property is not present   Jaehoon Chung
• [PATCH 05/33] gpio: stm32-gpio: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH v2] ARM: stm32: Use firmware property instead of loadables   Marek Vasut
• [Uboot-stm32] [PATCH 18/33] clk: clk_stm32f: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 19/33] clk: clk_stm32h7: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 20/33] reset: stm32-reset: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 21/33] mailbox: stm32-ipcc: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 22/33] i2c: stm32f7_i2c: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 23/33] phy: stm32-usbphyc: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 24/33] spi: stm32_spi: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 25/33] spi: stm32_qspi: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 26/33] mtd: stm32_fmc2: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 27/33] memory: stm32-fmc2: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH 28/33] serial: stm32: define LOG_CATEGORY   Patrice CHOTARD
• [PATCH 29/33] video: stm32_ltdc: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 31/33] board: st: stm32mp1: migrate trace to dev and log macro   Patrice CHOTARD
• [PATCH] efi_loader: Disable devices before handing over control   Heinrich Schuchardt
• [Uboot-stm32] [PATCH 32/33] board: st: common: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 33/33] configs: stm32mp15: enable LOG features   Patrice CHOTARD
• [PATCH 04/33] pinctrl: stm32: migrate trace to log macro   Patrice CHOTARD
• [PATCH] efi_loader: Disable devices before handing over control   Ilias Apalodimas
• FIT required certificate check issue   Muthmann, Thomas
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Tom Rini
• [PATCH] efi_loader: Disable devices before handing over control   Ilias Apalodimas
• [PATCH] efi_loader: Disable devices before handing over control   Mark Kettenis
• [PATCH] efi_loader: Disable devices before handing over control   Ilias Apalodimas
• [PATCH] MAINTAINERS: Add STM32MP1 RNG driver in stm32mp platform   Patrick DELAUNAY
• [PATCH] MAINTAINERS: Add stm32 and stm regexp for ARM STM STM32MP platform   Patrick DELAUNAY
• [PATCH] arm: stm32: cleanup arch gpio.h   Patrick DELAUNAY
• [PATCH] configs: stm32mp15: activate CMD_ELF   Patrick DELAUNAY
• [PATCH 1/2] configs: stm32mp15: activate CMD_IMPORTENV   Patrick DELAUNAY
• [PATCH 2/2] configs: stm32mp15: activate CMD_EXPORTENV   Patrick DELAUNAY
• [PATCH] stm32mp: stm32prog: accept device without partition   Patrick DELAUNAY
• [PATCH v2] usb: dwc3: Handle case where setup_phy is not needed   Marek Vasut
• [PATCH] usb: gadget: dwc2_udc_otg: return zero when reset property is not present   Marek Vasut
• [PATCH 11/11] bootm: Support string substitution in bootargs   Simon Glass
• [PATCH 07/11] bootm: Split out bootargs environment reading / writing   Simon Glass
• [PATCH 09/11] bootm: Allow updating the bootargs in a buffer   Simon Glass
• [PATCH 1/2] dm: core: Add late driver remove option   Simon Glass
• Raspberry pi4 8G usb drivers not working   Slim Pickens
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Alex G.
• [PATCH v3 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Jagan Teki
• [PATCH v4 5/9] sunxi: binman: Provide a default BL31 filename   Jagan Teki
• [PATCH 4/8] sunxi: board: Add PinePhone DT selection logic   Jagan Teki
• [PATCH] arm: sunxi: disable obsolete VIDEO config   Jagan Teki
• [PATCH] arm: sunxi: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH v4 23/27] video: omap: drop domain clock enabling by SOC api   Dario Binacchi
• [PATCH 1/2 v2] efi_loader: Sort header file ordering   Ilias Apalodimas
• [PATCH 2/2 v2] efi_loader: Disable devices before handing over control   Ilias Apalodimas
• [PATCH] mmc: Add some helper functions for retrying on error   Jaehoon Chung
• [PATCH] mmc: Add some helper functions for retrying on error   Jaehoon Chung
• [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH] Revert "Fix data abort caused by mis-aligning FIT data"   Tom Rini
• [PATCH] spl: fit: Prefer a malloc()'d buffer for loading images   Alexandru Gagniuc
• [PATCH 11/32] x86: coral: Correct max98357 file   Simon Glass
• [PATCH 4/8] sunxi: board: Add PinePhone DT selection logic   Samuel Holland
• [PATCH v4 5/9] sunxi: binman: Provide a default BL31 filename   Samuel Holland
• [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Peng Fan
• [PATCH v5 0/9] sunxi: binman fixes and SCP firmware support   Samuel Holland
• [PATCH v5 1/9] Makefile: Only define u-boot.itb rule when applicable   Samuel Holland
• [PATCH v5 2/9] binman: Only write FDT once per node   Samuel Holland
• [PATCH v5 3/9] sunxi: binman: Fix spacing between nodes   Samuel Holland
• [PATCH v5 4/9] sunxi: binman: Provide a default BL31 filename   Samuel Holland
• [PATCH v5 5/9] sunxi: binman: Use a macro for the BL31 load address   Samuel Holland
• [PATCH v5 6/9] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY   Samuel Holland
• [PATCH v5 7/9] sunxi: binman: Update FIT component descriptions   Samuel Holland
• [PATCH v5 8/9] binman: Add support for SCP firmware   Samuel Holland
• [PATCH v5 9/9] sunxi: binman: Add support for including SCP firmware   Samuel Holland
• Pull request for UEFI sub-system for efi-2021-01-rc1 (2)   Tom Rini
• [PATCH v2 00/30] x86: Allow Coral to boot into Chrome OS   Simon Glass
• [PATCH v2 01/30] Add an assembly guard around linux/bitops.h   Simon Glass
• [PATCH v2 02/30] x86: apl: Add core init for the SoC   Simon Glass
• [PATCH v2 03/30] x86: Add a layout for Chrome OS verified boot   Simon Glass
• [PATCH v2 04/30] x86: Add support for private files   Simon Glass
• [PATCH v2 05/30] x86: Allow writing tables to fail   Simon Glass
• [PATCH v2 06/30] x86: acpi: Store the ACPI context in global_data   Simon Glass
• [PATCH v2 07/30] x86: Don't bother clearing global NVS   Simon Glass
• [PATCH v2 08/30] x86: coral: Drop the duplicate PCIe settings   Simon Glass
• [PATCH v2 09/30] x86: Add SMBIOS info for Coral   Simon Glass
• [PATCH v2 10/30] x86: coral: Correct max98357 file   Simon Glass
• [PATCH v2 11/30] x86: Use if instead of #ifdef in write_tables()   Simon Glass
• [PATCH v2 12/30] x86: Allow putting some tables in the bloblist   Simon Glass
• [PATCH v2 13/30] x86: nhlt: Correct output of bytes and 16-bit data   Simon Glass
• [PATCH v2 14/30] x86: nhlt: Fix a few bugs in the table generation   Simon Glass
• [PATCH v2 15/30] x86: Show the interrupt pointer with 'irqinfo'   Simon Glass
• [PATCH v2 16/30] x86: sound: Correct error handling   Simon Glass
• [PATCH v2 17/30] acpi: Correct reset handling in acpi_device_add_power_res()   Simon Glass
• [PATCH v2 18/30] x86: acpi: Allow the SSDT to be empty   Simon Glass
• [PATCH v2 19/30] x86: acpi: Put the generated code first in DSDT   Simon Glass
• [PATCH v2 20/30] acpi: Don't reset the tables with every new generation   Simon Glass
• [PATCH v2 21/30] x86: Define the Chrome OS GNVS region   Simon Glass
• [PATCH v2 22/30] x86: Use CONFIG_CHROMEOS_VBOOT for verified boot   Simon Glass
• [PATCH v2 23/30] x86: Set up Chrome OS to boot into developer mode   Simon Glass
• [PATCH v2 24/30] x86: Boot coral into Chrome OS by default   Simon Glass
• [PATCH v2 25/30] x86: fsp: Convert fsp_dram to use log_debug()   Simon Glass
• [PATCH v2 26/30] x86: Silence some logging statements   Simon Glass
• [PATCH v2 27/30] x86: acpi: Include the TPMv1 table only if needed   Simon Glass
• [PATCH v2 28/30] x86: acpi: Don't show the UART address by default   Simon Glass
• [PATCH v2 29/30] x86: pinctrl: Silence the warning when a pin is not found   Simon Glass
• [PATCH v2 30/30] x86: fsp: Adjust calculations for MTRR range and DRAM top   Simon Glass
• [PATCH v3 0/6] x86: Updates to SMBIOS   Simon Glass
• [PATCH v3 1/6] board: Rename uclass to sysinfo   Simon Glass
• [PATCH v3 2/6] doc: Add a binding for sysinfo   Simon Glass
• [PATCH v3 3/6] x86: Pass an ofnode into each SMBIOS function   Simon Glass
• [PATCH v3 4/6] smbios: Allow properties to come from the device tree   Simon Glass
• [PATCH v3 5/6] smbios: Add more properties   Simon Glass
• [PATCH v3 6/6] smbios: Add documentation and devicetree binding   Simon Glass
• [GIT PULL] SoCFPGA fix for v2021.01   Tan, Ley Foon
• [PATCH 2/2 v2] efi_loader: Disable devices before handing over control   Ilias Apalodimas
• [PATCH 1/2 v2] efi_loader: Sort header file ordering   Ilias Apalodimas
• [PATCH v3 2/6] doc: Add a binding for sysinfo   Heinrich Schuchardt
• [PATCH v3 4/6] smbios: Allow properties to come from the device tree   Heinrich Schuchardt
• [PATCH v3 6/6] smbios: Add documentation and devicetree binding   Heinrich Schuchardt
• [PATCH 1/2 v2] efi_loader: Sort header file ordering   Heinrich Schuchardt
• [PATCH 2/2 v2] efi_loader: Disable devices before handing over control   Heinrich Schuchardt
• [PATCH 4/8] sunxi: board: Add PinePhone DT selection logic   Jagan Teki
• [PATCH 2/3] sunxi: dts: OrangePi Zero: Enable SPI flash.   Jagan Teki
• [PATCH v2 0/2] Add OpenCores I2C controller driver   Pragnesh Patel
• [PATCH v2 1/2] i2c: ocores: add i2c driver for OpenCores I2C controller   Pragnesh Patel
• [PATCH v2 2/2] riscv: sifive/fu540: kconfig: Enable support for Opencores I2C controller   Pragnesh Patel
• [PATCH] samsung: common: remove the duplicated stdio print message   Jaehoon Chung
• [PATCH v2 0/7] Microchip PolarFire SoC support   Padmarao Begari
• [PATCH v2 1/7] riscv: Add DMA 64-bit address support   Padmarao Begari
• [PATCH v2 2/7] net: macb: Add DMA 64-bit address support for macb   Padmarao Begari
• [PATCH v2 3/7] net: macb: Add phy address to read it from device tree   Padmarao Begari
• [PATCH v2 4/7] clk: Add Microchip PolarFire SoC clock driver   Padmarao Begari
• [PATCH v2 5/7] riscv: dts: Add device tree for Microchip Icicle Kit   Padmarao Begari
• [PATCH v2 6/7] riscv: Add Microchip MPFS Icicle Kit support   Padmarao Begari
• [PATCH v2 7/7] doc: board: Add Microchip MPFS Icicle Kit doc   Padmarao Begari
• [PULL] Pull request for u-boot master = u-boot-stm32-20201021   Patrick DELAUNAY
• [PATCH v5 0/9] sunxi: binman fixes and SCP firmware support   Maxime Ripard
• [PATCH v1 0/7] toradex: add support for Apalis iMX8X WB IT V1.1 module   Igor Opaniuk
• [PATCH v1 1/7] ARM: dts: fsl-imx8qxp-apalis: add initial device tree   Igor Opaniuk
• [PATCH v1 2/7] board: toradex: add apalis-imx8x 2gb wb it v1.1a module support   Igor Opaniuk
• [PATCH v1 3/7] doc: board: apalis-imx8x: add documentation   Igor Opaniuk
• [PATCH v1 4/7] imx8: allow overriding memory layout   Igor Opaniuk
• [PATCH v1 5/7] apalis-imx8: add implementation for board_mem_get_layout   Igor Opaniuk
• [PATCH v1 6/7] apalis-imx8x: add implementation for board_mem_get_layout   Igor Opaniuk
• [PATCH v1 7/7] colibri-imx8x: add implementation for board_mem_get_layout   Igor Opaniuk
• [PATCH 1/4] serial: serial_xen: print U-Boot banner and others   Anastasiia Lukianenko
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Anastasiia Lukianenko
• [PATCH 1/4] serial: serial_xen: print U-Boot banner and others   takahiro.akashi at linaro.org
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   takahiro.akashi at linaro.org
• [PATCH 00/10] xilinx: common: Several minor fixups   Michal Simek
• [PATCH 01/10] arm64: zynqmp: Fix zynqmp mini qspi max frequency   Michal Simek
• [PATCH 02/10] xilinx: common: Protect board_late_init_xilinx()   Michal Simek
• [PATCH 03/10] xilinx: Add DDR base address to bootscript address   Michal Simek
• [PATCH 04/10] xilinx: Enable FRU command for all ARM based platforms   Michal Simek
• [PATCH 05/10] xilinx: zynq: Change types from u32 to uint32_t   Michal Simek
• [PATCH 06/10] xilinx: zynq: Enable AES command   Michal Simek
• [PATCH 07/10] xilinx: Enable SF_TEST command for all ARM based platforms   Michal Simek
• [PATCH 08/10] xilinx: Remove additional newline in config files   Michal Simek
• [PATCH 09/10] xilinx: Merge together BOOT_SCRIPT_OFFSET between MB and ARM   Michal Simek
• [PATCH 10/10] arm64: versal: Set initrd_high to as high as possible   Michal Simek
• [PATCH v3 2/6] doc: Add a binding for sysinfo   Simon Glass
• [PATCH v3 6/6] smbios: Add documentation and devicetree binding   Simon Glass
• [PATCH v3 4/6] smbios: Allow properties to come from the device tree   Simon Glass
• [PATCH 11/11] bootm: Support string substitution in bootargs   Wolfgang Denk
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Tom Rini
• [PATCH 2/2] test: unit tests for print_freq(), print_size()   Tom Rini
• [PATCH v4 00/13] x86: Updates to SMBIOS   Simon Glass
• [PATCH v4 01/13] board: Rename uclass to sysinfo   Simon Glass
• [PATCH v4 02/13] doc: Add a binding for sysinfo   Simon Glass
• [PATCH v4 03/13] x86: Pass an ofnode into each SMBIOS function   Simon Glass
• [PATCH v4 04/13] smbios: Allow properties to come from the device tree   Simon Glass
• [PATCH v4 05/13] smbios: Add more properties   Simon Glass
• [PATCH v4 06/13] smbios: Add documentation and devicetree binding   Simon Glass
• [PATCH v4 07/13] sysinfo: Provide a default driver to set SMBIOS values   Simon Glass
• [PATCH v4 08/13] rockchip: Use devicetree for SMBIOS settings   Simon Glass
• [PATCH v4 09/13] imx: Use devicetree for SMBIOS settings on MYiR MYS-6ULX   Simon Glass
• [PATCH v4 10/13] odroid-c2: Use devicetree for SMBIOS settings   Simon Glass
• [PATCH v4 11/13] arm64: mvebu: Use devicetree for SMBIOS settings on uDPU   Simon Glass
• [PATCH v4 12/13] x86: galileo: Use devicetree for SMBIOS settings   Simon Glass
• [PATCH v4 13/13] smbios: Drop the unused Kconfig options   Simon Glass
• [PATCH] ARM: am335x: Add phyBOARD REGOR support   Parthiban Nallathambi
• [PATCH] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz, Foundries
• [GIT PULL] SoCFPGA fix for v2021.01   Tom Rini
• [PULL] Pull request for u-boot master = u-boot-stm32-20201021   Tom Rini
• [PATCH 4/8] sunxi: board: Add PinePhone DT selection logic   Maxime Ripard
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Patrick DELAUNAY
• [PATCH] ARM: am335x: Add phyBOARD REGOR support   Tom Rini
• [PATCH 10/10] arm64: versal: Set initrd_high to as high as possible   Tom Rini
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Marek Vasut
• [patch 2/8] RFC: drivers/video/rockchip/rk_edp.c: Add rk3399 support   Alper Nebi Yasak
• [patch 3/8] RFC: drivers/video/rockchip/rk_edp.c: Change interrupt polarity configuration   Alper Nebi Yasak
• [patch 4/8] RFC: drivers/video/rockchip/rk_edp.c: Change clock rate   Alper Nebi Yasak
• Pull request: u-boot-sunxi/master   Jagan Teki
• [PATCH] video: rockchip: Restrict EDP, VOP, MIPI files to GPL-2.0   Alper Nebi Yasak
• [PATCH 0/2] lib: print_freq() should output kHz not KHz   Heinrich Schuchardt
• [PATCH 1/2] lib: print_freq() should output kHz not KHz   Heinrich Schuchardt
• [PATCH 2/2] test: unit tests for print_freq(), print_size()   Heinrich Schuchardt
• [PATCH 1/2] rockchip: rk3399: Re-init clocks in U-Boot proper   Alper Nebi Yasak
• [PATCH 2/2] rockchip: gru: Allow setting up clocks in U-Boot proper   Alper Nebi Yasak
• [PATCH v3 1/2] video: backlight: Support PWMs without a known period_ns   Alper Nebi Yasak
• [PATCH v3 2/2] pwm: Add a driver for Chrome OS EC PWM   Alper Nebi Yasak
• [PATCH] mx6: peripheral clock from oscillator   Fabio Estevam
• [PATCH] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz, Foundries
• [PATCH] mx6: peripheral clock from oscillator   Fabio Estevam
• [PATCH] Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMIT   Tom Rini
• [PATCH 01/12] log: Add missing category names   Tom Rini
• [PATCH 05/12] syscon: Drop the logging in syscon_get_by_driver_data()   Tom Rini
• [PATCH 06/12] bloblist: Place on a 4KB boundary   Tom Rini
• [PATCH 10/12] board: Show memory for frame buffers   Tom Rini
• [PATCH 11/12] i2c: designware: Use log_debug() for debugging   Tom Rini
• [PATCH 12/12] tpm: cr50: Correct logging statements   Tom Rini
• [PATCH 1/3] image: Add a function to modify category information   Tom Rini
• [PATCH 2/3] mkimage: Skip adding non-existent IDs to a list   Tom Rini
• [PATCH 3/3] cosmetic: image: Fix comments and the order of definitions   Tom Rini
• [PATCH] common, autoboot: sync functionality with Kconfig description   Tom Rini
• [PATCH] cli_hush.c: remove broken sanity check   Tom Rini
• [PATCH 1/1] common: rename getc() to getchar()   Tom Rini
• [PATCH v2 1/2] doc: Document timer API   Tom Rini
• [PATCH v2 2/2] timer: Return count from timer_ops.get_count   Tom Rini
• [PATCH 1/6] README: Update links to mailing list archives   Tom Rini
• [PATCH 2/6] README: Update source code location   Tom Rini
• [PATCH 3/6] README: Update directory hierarchy   Tom Rini
• [PATCH 4/6] README: sandbox: Change reference to sandbox details   Tom Rini
• [PATCH 5/6] README: vxworks: Fix typo overwride   Tom Rini
• [PATCH 6/6] README: Convert HTTP links to HTTPS   Tom Rini
• [PATCH v2] km: fix license string and compatible strings   Tom Rini
• [PATCH] tools: image-host.c: use correct output format   Tom Rini
• [PATCH 1/6] spi: Add Qualcomm QUP SPI controller driver   Tom Rini
• [PATCH 2/6] IPQ40xx: Add SPI support   Tom Rini
• [PATCH 3/6] net: Add IPQ40xx MDIO driver   Tom Rini
• [PATCH 4/6] IPQ40xx: Add support for MDIO   Tom Rini
• [PATCH 5/6] rng: Add Qualcomm MSM PRNG driver   Tom Rini
• [PATCH 6/6] IPQ40xx: Add PRNG support   Tom Rini
• [PATCH 1/2] lib: print_freq() should output kHz not KHz   Tom Rini
• [PATCH v2 1/2] km: adapt defines and variables for new memory layout   Tom Rini
• [PATCH v2 2/2] km/common: change ubicopy variable   Tom Rini
• [PATCH 1/2] dm: core: improve uclass_get_device_by_phandle_id() description   Tom Rini
• [PATCH 2/2] gpio: fix gpio_request_by_name() description   Tom Rini
• [PATCH] Remove default value of CONFIG_PREBOOT for CONFIG_USB_STORAGE   Tom Rini
• [PATCH] mmc: Fix comment typo   Tom Rini
• [PATCH] fs: btrfs: Fix typo in error message   Tom Rini
• [PATCH] usb: musb-new: Fix typo in caution message   Tom Rini
• [PATCH] ARM: mvebu: a38x: Fix comment typo   Tom Rini
• [PATCH] log: Tidy up documentation   Tom Rini
• [PATCH] log: Tidy up documentation   Tom Rini
• [PATCH] doc: dfu: fix typo in README.dfu   Tom Rini
• [PATCH v2] clk: ccf: replace the get_rate helper   Tom Rini
• [v3 1/2] reset: ast2500: Use SCU for reset control   Tom Rini
• [v3 2/2] cosmetic: reset: ast2500: Rename driver and configs   Tom Rini
• [PATCH 1/4] serial: serial_xen: print U-Boot banner and others   Tom Rini
• [PATCH 2/4] arch: arm/xen: add putc() for debugging   Tom Rini
• [PATCH 3/4] xen: add definitions for console_io   Tom Rini
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Tom Rini
• [PATCH] mmc: mtk-sd: change some dev_err into dev_dbg   Tom Rini
• [PATCH] rtc: move pcf8563 to Kconfig   Tom Rini
• [PATCH 1/1] rtc: provide an emulated RTC   Heinrich Schuchardt
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Tan, Ley Foon
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Tom Rini
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Tan, Ley Foon
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Tom Rini
• [PATCH] configs: ls1043aqds: Configure QSPI related configs   Priyanka Jain
• [PATCH 1/2] board/freescale/vid: rework of VID support   Priyanka Jain
• [PATCH 10/10] arm64: versal: Set initrd_high to as high as possible   Michal Simek
• [PATCH] microblaze: Enable i2c DM by default   Michal Simek
• [PATCH] arm: fsl: common: Improve NXP VID driver PMBus support   Priyanka Jain (OSS)
• [PATCH] samsung: common: remove the duplicated stdio print message   Minkyu Kang
• [PATCH] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz, Foundries
• [PATCH] arm: fsl: common: Improve NXP VID driver PMBus support   Meenakshi Aggarwal
• [PATCH 0/2] microblaze: Reuse xilinx common setup   Michal Simek
• [PATCH 1/2] microblaze: Wire generic xilinx board_late_init_xilinx()   Michal Simek
• [PATCH 2/2] microblaze: Enable board_late_init()   Michal Simek
• Pull request: u-boot-samsung master   Minkyu Kang
• [PATCH 01/16] cl-som-imx7: Switch to DM_SPI/DM_SPI_FLASH   Jagan Teki
• [PATCH 02/16] cm_fx6: Switch to full DM-aware   Jagan Teki
• [PATCH] spi: migrate trace to dev and log macro in spi uclass   Jagan Teki
• [patch 2/8] RFC: drivers/video/rockchip/rk_edp.c: Add rk3399 support   Arnaud Patard (Rtp)
• [PATCH] mtd: spi-nor-ids: Add Winbond W25M512JW flash entry   Jagan Teki
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Anastasiia Lukianenko
• [patch 3/8] RFC: drivers/video/rockchip/rk_edp.c: Change interrupt polarity configuration   Arnaud Patard (Rtp)
• [RESEND 0/7] Refactor generic fastboot_set_reboot_flag implementation   Roman Kovalivskyi
• [RESEND 1/7] cmd: bcb: Extract '__bcb_load' from 'do_bcb_load' for internal needs   Roman Kovalivskyi
• [RESEND 2/7] cmd: bcb: Extract '__bcb_set' from 'do_bcb_set' for internal needs   Roman Kovalivskyi
• [RESEND 3/7] cmd: bcb: Extract '__bcb_store' from 'do_bcb_store' for internal needs   Roman Kovalivskyi
• [RESEND 4/7] cmd: bcb: Expose 'bcb_write_reboot_reason' to external callers   Roman Kovalivskyi
• [RESEND 5/7] cmd: bcb: Add support for processing const string literals in bcb_set()   Roman Kovalivskyi
• [RESEND 6/7] Revert "fastboot: Add default fastboot_set_reboot_flag implementation"   Roman Kovalivskyi
• [RESEND 7/7] fastboot: Implement generic fastboot_set_reboot_flag   Roman Kovalivskyi
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Anastasiia Lukianenko
• [PATCH] mtd: spi-nor-ids: Add SECT_4K to mx25l12805d   Jagan Teki
• [PATCH 1/4] serial: serial_xen: print U-Boot banner and others   Anastasiia Lukianenko
• [PATCH V2 1/7] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Simon Goldschmidt
• [patch 4/8] RFC: drivers/video/rockchip/rk_edp.c: Change clock rate   Arnaud Patard (Rtp)
• [PATCH] configs: ls1043aqds: Configure QSPI related configs   Kuldeep Singh
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Anastasiia Lukianenko
• [PATCH V2 1/7] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Marek Vasut
• [PATCH V2 1/7] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Simon Goldschmidt
• [patch 2/8] RFC: drivers/video/rockchip/rk_edp.c: Add rk3399 support   Alper Nebi Yasak
• [PATCHv2] pci: layerscape: Fixup PCIe EP mode DT nodes for LX2160A rev2   Priyanka Jain (OSS)
• [PATCH 1/1] net: sntp: remove CONFIG_TIMESTAMP constraint   Heinrich Schuchardt
• [PATCH 1/1] log: correct and check array size of log categories   Heinrich Schuchardt
• [PATCH v2 0/8] mmc: zynqmp_sdhci: Add support for Tap delay   Michal Simek
• [PATCH v2 1/8] Revert "mmc: zynq: parse dt when probing"   Michal Simek
• [PATCH v2 2/8] mmc: Define timing macro's   Michal Simek
• [PATCH v2 3/8] mmc: zynq_sdhci: Move macro to the top   Michal Simek
• [PATCH v2 4/8] mmc: zynq_sdhci: Read clock phase delays from dt   Michal Simek
• [PATCH v2 5/8] mmc: zynq_sdhci: Set tapdelays based on clk phase delays   Michal Simek
• [PATCH v2 6/8] mmc: zynq_sdhci: Add clock phase delays for Versal   Michal Simek
• [PATCH v2 7/8] mmc: zynq_sdhci: Extend UHS timings till hs200   Michal Simek
• [PATCH v2 8/8] mmc: zynq_sdhci: Add common function to set input/output tapdelays   Michal Simek
• [PATCH] arm: fsl: common: Improve NXP VID driver PMBus support   Priyanka Jain (OSS)
• [PATCH] include/configs: ls1012aqds: add default environment variable   Priyanka Jain (OSS)
• [PATCH] mx6: peripheral clock from oscillator   Fabio Estevam
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Tom Rini
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Anastasiia Lukianenko
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Tom Rini
• Pull request: u-boot-sunxi/master   Tom Rini
• [PATCH] fs/squashfs: fix memory leak in sqfs_read()   Barbaros Tokaoglu
• [PATCH v4 0/7] wdt: Add support for watchdogs on Kendryte K210   Sean Anderson
• [PATCH v2] ARM: am335x: Add phyBOARD REGOR support   Parthiban Nallathambi
• [PATCH] ARM: am335x: Add phyBOARD REGOR support   Parthiban
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Marek Vasut
• Pull request: u-boot-samsung master   Tom Rini
• [PATCH v2] ARM: am335x: Add phyBOARD REGOR support   Tom Rini
• [PATCH] dfu: Fix handling of UBI partitions in MTD backend   Patrick DELAUNAY
• Re-syncing U-Boot DTS with the kernel again   Tom Rini
• [PATCH v2 1/2] cmd: Rename CMD_MISC to CMD_SLEEP   Bin Meng
• [PATCH] cmd: Add a 'misc' command to access miscellaneous devices   Bin Meng
• [PATCH 00/16] spi: dm-conversion (part3)   Jagan Teki
• [PATCH v2 2/4] spi: Remove uses of #ifndef __U_BOOT__ from spi-mem.c   Jagan Teki
• how to use SPL_MULTI_DTB_FIT?   Tim Harvey
• [PATCH v2] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH v4 00/13] riscv: Add SPI support for Kendryte K210   Jagan Teki
• [PATCH] rockchip: rk3399: Add Nanopi M4V2 board support   Jagan Teki
• [PATCH] rockchip: rk3399: Add Nanopi M4V2 board support   Jagan Teki
• [PATCH 1/1] input: add support for FN1 - FN10 on crosswire kbd   Heinrich Schuchardt
• [PATCHv2] mx6: peripheral clock from oscillator   Jorge Ramirez-Ortiz
• [PATCH 15/17] pytest: Collect SPL unit tests   Simon Glass
• [PATCH 1/1] rtc: provide an emulated RTC   Simon Glass
• [PATCH 1/4] rockchip: Enable Console MUX in ROCKPi N10   Jagan Teki
• [PATCH 2/4] arm64: dts: rockchip: Add chosen node for ROCK-Pi N8   Jagan Teki
• [PATCH 3/4] video: rockchip: Support 4K resolution for rk3288, HDMI   Jagan Teki
• [PATCH 4/4] rockchip: Enable Console MUX in ROCKPi N8   Jagan Teki
• [PATCH 1/2] rockchip: rk3399: Re-init clocks in U-Boot proper   Simon Glass
• [PATCH 2/2] rockchip: gru: Allow setting up clocks in U-Boot proper   Simon Glass
• [PATCH] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• [maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config   Tom Rini
• [PATCH 0/8] PinePhone automatic device tree selection   Jagan Teki
• [PATCH 1/1] post: remove redundant condition   Tom Rini
• [PATCH 1/2] power: regulator: gpio-regulator: protect count value   Tom Rini
• [PATCH 2/2] power: regulator: gpio-regulator: Convert to use APIs which support live DT   Tom Rini
• [PATCH] i2c: i2c-gpio: Convert to use APIs which support live DT   Tom Rini
• [PATCH] Makefile: Fix u-boot-nodtb.bin target   Tom Rini
• [PATCH v2 1/2] cmd: Rename CMD_MISC to CMD_SLEEP   Tom Rini
• [PATCH v2 2/2] cmd: Split out timer command from the sleep command   Tom Rini
• [PATCH] cmd: Add a 'misc' command to access miscellaneous devices   Tom Rini
• [PATCH] phy: nop-phy: add clk bulk   Tom Rini
• [PATCH v2] cmd: fat: Use do_save() for fatwrite   Tom Rini
• [PATCH] bootm: fix wrong conditions about images overlap   Tom Rini
• [PATCH 2/2] test: unit tests for print_freq(), print_size()   Tom Rini
• [PATCH v4 00/13] riscv: Add SPI support for Kendryte K210   Jagan Teki
• [PATCH v10 2/2] board: presidio-asic: Add SPI NOR support   Jagan Teki
• [PATCH v2 0/8] PinePhone automatic device tree selection   Samuel Holland
• [PATCH v2 1/8] sunxi: board: Use a more descriptive variable name   Samuel Holland
• [PATCH v2 2/8] sunxi: board: Add a helper to get the SPL DT name   Samuel Holland
• [PATCH v2 3/8] sunxi: board: Simplify Pine A64 DT selection logic   Samuel Holland
• [PATCH v2 4/8] sunxi: board: Add PinePhone DT selection logic   Samuel Holland
• [PATCH v2 5/8] sunxi: board: Save the chosen DT name in the SPL header   Samuel Holland
• [PATCH v2 6/8] sunxi: board: Set fdtfile to match the DT chosen by SPL   Samuel Holland
• [PATCH v2 7/8] sunxi: DT: A64: update device tree files   Samuel Holland
• [PATCH v2 8/8] sunxi: a64: Add a defconfig for the PinePhone   Samuel Holland
• [PATCH v10 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Jagan Teki
• [PATCH v2 7/7] doc: board: Add Microchip MPFS Icicle Kit doc   Jagan Teki
• [PATCH] rockchip: mkimage: Remove host endianness dependency   Samuel Holland
• [PATCH 0/8] PinePhone automatic device tree selection   Peter Robinson
• [PATCH 1/2] rockchip: rk3399: Re-init clocks in U-Boot proper   Alper Nebi Yasak
• [PATCH 2/2] rockchip: gru: Allow setting up clocks in U-Boot proper   Alper Nebi Yasak
• [PATCH v2 1/7] riscv: Add DMA 64-bit address support   Anup Patel
• [PATCH v2 5/7] riscv: dts: Add device tree for Microchip Icicle Kit   Anup Patel
• [PATCH v2 4/7] clk: Add Microchip PolarFire SoC clock driver   Anup Patel
• [PATCH 0/5] sandbox: implement cold reset   Heinrich Schuchardt
• [PATCH 1/5] sandbox: eth-raw: do not close the console input   Heinrich Schuchardt
• [PATCH 2/5] sandbox: enable poweroff command   Heinrich Schuchardt
• [PATCH 3/5] test/py: test poweroff   Heinrich Schuchardt
• [PATCH 4/5] sandbox: implement reset   Heinrich Schuchardt
• [PATCH 5/5] test: adjust sysreset tests   Heinrich Schuchardt
• [PATCH v2 2/7] net: macb: Add DMA 64-bit address support for macb   Anup Patel
• [PATCH v2 3/7] net: macb: Add phy address to read it from device tree   Anup Patel
• [PATCH v2 6/7] riscv: Add Microchip MPFS Icicle Kit support   Anup Patel
• [PATCH v2 7/7] doc: board: Add Microchip MPFS Icicle Kit doc   Anup Patel
• [PATCH v2 0/2] rtc: provide an emulated RTC   Heinrich Schuchardt
• [PATCH v2 1/2] Makefile: provide constant with seconds since epoch   Heinrich Schuchardt
• [PATCH v2 2/2] rtc: provide an emulated RTC   Heinrich Schuchardt
• [PATCH v2 4/5] sunxi: video: v3s: Enable LCD support   Martin Cerveny
• [PATCH v2 5/5] sunxi: add drivers and configs needed for LCD display   Martin Cerveny
• [PATCH v5 00/27] Add DM support for omap PWM backlight   Dario Binacchi
• [PATCH v5 01/27] clk: export generic routines   Dario Binacchi
• [PATCH v5 02/27] dt-bindings: bus: ti-sysc: resync with Linux 5.9-rc7   Dario Binacchi
• [PATCH v5 03/27] bus: ti: add minimal sysc interconnect target driver   Dario Binacchi
• [PATCH v5 04/27] arm: dts: sync am33xx with Linux 5.9-rc7   Dario Binacchi
• [PATCH v5 05/27] clk: add clk_round_rate()   Dario Binacchi
• [PATCH v5 06/27] clk: ti: add mux clock driver   Dario Binacchi
• [PATCH v5 07/27] arm: ti: am33xx: add DPLL_EN_FAST_RELOCK_BYPASS macro   Dario Binacchi
• [PATCH v5 08/27] clk: ti: am33xx: add DPLL clock drivers   Dario Binacchi
• [PATCH v5 09/27] clk: ti: add divider clock driver   Dario Binacchi
• [PATCH v5 10/27] clk: ti: add gate clock driver   Dario Binacchi
• [PATCH v5 11/27] ti: am33xx: fix do_enable_clocks() to accept NULL parameters   Dario Binacchi
• [PATCH v5 12/27] clk: ti: add support for clkctrl clocks   Dario Binacchi
• [PATCH v5 13/27] clk: ti: omap4: add clock manager driver   Dario Binacchi
• [PATCH v5 14/27] clk: ti: am335x: add clock manager driver   Dario Binacchi
• [PATCH v5 15/27] clk: move clk-ti-sci driver to 'ti' directory   Dario Binacchi
• [PATCH v5 16/27] fdt: translate address if #size-cells = <0>   Dario Binacchi
• [PATCH v5 17/27] omap: timer: fix the rate setting   Dario Binacchi
• [PATCH v5 18/27] misc: am33xx: add control module driver   Dario Binacchi
• [PATCH v5 19/27] pwm: ti: am33xx: add enhanced pwm driver   Dario Binacchi
• [PATCH v5 20/27] bus: ti: am33xx: add pwm subsystem driver   Dario Binacchi
• [PATCH v5 21/27] dm: core: add a function to decode display timings   Dario Binacchi
• [PATCH v5 22/27] video: omap: add panel driver   Dario Binacchi
• [PATCH v5 23/27] video: omap: drop domain clock enabling by SOC api   Dario Binacchi
• [PATCH v5 24/27] video: omap: set LCD clock rate through DM API   Dario Binacchi
• [PATCH v5 25/27] video: omap: split the legacy code from the DM code   Dario Binacchi
• [PATCH v5 26/27] video: omap: move drivers to 'ti' directory   Dario Binacchi
• [PATCH v5 27/27] board: ti: am335x-ice: get CDCE913 clock device   Dario Binacchi
• [PATCHv2] mx6: peripheral clock from oscillator   Fabio Estevam
• [PATCH v5 1/2] arm: rmobile: Add RZ/G2[HMNE] SoC support   Marek Vasut
• [PATCH v5 2/2] mmc: renesas-sdhi: Add R8A774A1 SDHI quirks   Marek Vasut
• [PATCH] fs/squashfs: fix memory leak in sqfs_read()   João Marcos Costa
• [PATCH 0/7] ARM: dts: at91: DTC 1.6.0+ warning fixes   Eugen Hristev
• [PATCH 1/7] ARM: dts: at91: vinco: fix I2C warning bus unit address   Eugen Hristev
• [PATCH 2/7] ARM: dts: at91: at91sam9261ek: fix SPI unit address warning   Eugen Hristev
• [PATCH 3/7] ARM: dts: at91: at91sam9g20-taurus: fix SPI bus unit address   Eugen Hristev
• [PATCH 4/7] ARM: dts: at91: at91sam9g20ek_common: fix SPI bus unit address   Eugen Hristev
• [PATCH 5/7] ARM: dts: at91: at91sam9g25ek: fix I2C bus unit address   Eugen Hristev
• [PATCH 6/7] ARM: dts: at91: gurnard: fix SPI bus unit address   Eugen Hristev
• [PATCH 7/7] ARM: dts: at91: sama5d3xmb: fix I2C bus unit address   Eugen Hristev
• [PATCH v2 2/4] spi: Remove uses of #ifndef __U_BOOT__ from spi-mem.c   Sean Anderson
• [PATCH v4 00/13] riscv: Add SPI support for Kendryte K210   Sean Anderson
• [PATCH 1/2] pinctrl: k210: Fix inverted IE and OE for I2C   Sean Anderson
• [PATCH 2/2] pinctrl: k210: Rename power domains to match datasheet   Sean Anderson
• [maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• [maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config   Tom Rini
• [maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config   Anatolij Gustschin
• [maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• [maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config   Tom Rini
• [PATCH v2 00/30] patman: Collect review tags and comments from Patchwork   Simon Glass
• [PATCH v2 01/30] patman: Correct operation of -n   Simon Glass
• [PATCH v2 02/30] azure/gitLab/travis: Add pygit2 as a dependency for tests   Simon Glass
• [PATCH v2 03/30] patman: Update how tests are run   Simon Glass
• [PATCH v2 04/30] patman: Fix whitespace errors in func_test   Simon Glass
• [PATCH v2 05/30] patman: Use capture_sys_output() consistently   Simon Glass
• [PATCH v2 06/30] patman: Fix remaining pylint3 warnings in func_test   Simon Glass
• [PATCH v2 07/30] patman: Allow linking a series with patchwork   Simon Glass
• [PATCH v2 08/30] patman: Fix indenting in patchstream   Simon Glass
• [PATCH v2 09/30] patman: Fix constant style in patchstream   Simon Glass
• [PATCH v2 10/30] patman: Rename functions in patchstream   Simon Glass
• [PATCH v2 11/30] patman: Rename variables in patchstream   Simon Glass
• [PATCH v2 12/30] patman: Drop unused args in patchstream   Simon Glass
• [PATCH v2 13/30] patman: Fix up argument/return docs in patchstream   Simon Glass
• [PATCH v2 14/30] patman: Move warning collection to a function   Simon Glass
• [PATCH v2 15/30] patman: Attach warnings to individual patches   Simon Glass
• [PATCH v2 16/30] patman: Convert 'Series-xxx' tag errors into warnings   Simon Glass
• [PATCH v2 17/30] patman: Drop unused signoff member   Simon Glass
• [PATCH v2 18/30] patman: Add a test for PatchStream tags   Simon Glass
• [PATCH v2 19/30] patman: Add some tests for warnings   Simon Glass
• [PATCH v2 20/30] patman: Convert testBasic() to use an interator   Simon Glass
• [PATCH v2 21/30] patman: Require tags to be before sign-off   Simon Glass
• [PATCH v2 22/30] patman: Fix spelling of plural for warning   Simon Glass
• [PATCH v2 23/30] patman: Don't ignore lines starting with hash   Simon Glass
• [PATCH v2 24/30] patman: Allow showing a Commit as a string   Simon Glass
• [PATCH v2 25/30] patman: Improve handling of files   Simon Glass
• [PATCH v2 26/30] patman: Detect missing upstream in CountCommitsToBranch   Simon Glass
• [PATCH v2 27/30] patman: Support checking for review tags in patchwork   Simon Glass
• [PATCH v2 28/30] patman: Support updating a branch with review tags   Simon Glass
• [PATCH v2 29/30] patman: Support parsing of review snippets   Simon Glass
• [PATCH v2 30/30] patman: Support listing comments from patchwork   Simon Glass
• [PATCH v2 21/30] patman: Require tags to be before sign-off   Sean Anderson
• [PATCH 3/3] riscv: Move timer portions of SiFive CLINT to drivers/timer   Rick Chen
• [PATCHv2] pci: layerscape: Fixup PCIe EP mode DT nodes for LX2160A rev2   Z.q. Hou
• [PATCH v2 0/3] riscv: Move timers into drivers/timer   Sean Anderson
• [PATCH v2 1/3] riscv: Move Andes PLMT driver to drivers/timer   Sean Anderson
• [PATCH v2 2/3] timer: Add _TIMER suffix to Andes PLMT Kconfig   Sean Anderson
• [PATCH v2 3/3] riscv: Move timer portions of SiFive CLINT to drivers/timer   Sean Anderson
• [PATCH v2 00/11] dm: test: Add unit tests for SPL   Simon Glass
• [PATCH v2 01/11] dm: test: Build tests for SPL   Simon Glass
• [PATCH v2 02/11] dm: test: Update the test runner to support of-platdata   Simon Glass
• [PATCH v2 03/11] dm: test: Add a way to run SPL tests   Simon Glass
• [PATCH v2 04/11] dm: test: Add a very simple of-platadata test   Simon Glass
• [PATCH v2 05/11] Makefile: Generate a symbol file for u-boot-spl   Simon Glass
• [PATCH v2 06/11] pytest: Collect SPL unit tests   Simon Glass
• [PATCH v2 07/11] test: Run SPL unit tests   Simon Glass
• [PATCH v2 08/11] sandbox: Allow selection of SPL unit tests   Simon Glass
• [PATCH v2 09/11] test: Run only the selected SPL test   Simon Glass
• [PATCH v2 10/11] dm: test: Drop of-platdata pytest   Simon Glass
• [PATCH v2 11/11] Azure/GitLab/Travis: Add SPL unit tests   Simon Glass
• Pull request: u-boot-riscv/master 20201026   uboot at andestech.com
• [PATCH] pci: layerscape: fix a dead loop issue   Zhiqiang Hou
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   takahiro.akashi at linaro.org
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   takahiro.akashi at linaro.org
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Oleksandr Andrushchenko
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Oleksandr Andrushchenko
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   takahiro.akashi at linaro.org
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Oleksandr Andrushchenko
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   takahiro.akashi at linaro.org
• [PATCH] board/freescale/common: fix a bug that failed to read/write eeprom on ls1021atsn   Biwen Li
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Oleksandr Andrushchenko
• [PATCH v2 1/8] Revert "mmc: zynq: parse dt when probing"   Jaehoon Chung
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Oleksandr Andrushchenko
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   takahiro.akashi at linaro.org
• [PATCH 4/4] serial: serial_xen: add DEBUG_UART support   Oleksandr Andrushchenko
• [PATCH 1/2] hush: Remove default CONFIG_SYS_PROMPT_HUSH_PS2 setting from board files   Patrick Delaunay
• [PATCH 2/2] cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2   Patrick Delaunay
• [PATCH 1/2] hush: Remove default CONFIG_SYS_PROMPT_HUSH_PS2 setting from board files   Oleksandr Andrushchenko
• [PATCH v2 0/9] ARM: dts: at91: DTC 1.6.0+ warning fixes   Eugen Hristev
• [PATCH v2 1/9] ARM: dts: at91: vinco: fix I2C warning bus unit address   Eugen Hristev
• [PATCH v2 2/9] ARM: dts: at91: at91sam9261ek: fix SPI unit address warning   Eugen Hristev
• [PATCH v2 3/9] ARM: dts: at91: at91sam9g20-taurus: fix SPI bus unit address   Eugen Hristev
• [PATCH v2 4/9] ARM: dts: at91: at91sam9g20ek_common: fix SPI bus unit address   Eugen Hristev
• [PATCH v2 5/9] ARM: dts: at91: at91sam9g25ek: fix I2C bus unit address   Eugen Hristev
• [PATCH v2 6/9] ARM: dts: at91: gurnard: fix SPI bus unit address   Eugen Hristev
• [PATCH v2 7/9] ARM: dts: at91: sama5d3xmb: fix I2C bus unit address   Eugen Hristev
• [PATCH v2 8/9] ARM: dts: at91: sam9260ek: fix SPI bus unit address   Eugen Hristev
• [PATCH v2 9/9] ARM: dts: at91: sama5d3xmb_cmp: fix SPI bus unit address   Eugen Hristev
• [v2] include/configs: ls1012aqds: add default environment variable   Biwen Li
• [PATCH v2 1/8] Revert "mmc: zynq: parse dt when probing"   Michal Simek
• [PATCH v2 0/8] mmc: zynqmp_sdhci: Add support for Tap delay   Peng Fan
• [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Miquel Raynal
• [PATCH v2 5/8] mmc: zynq_sdhci: Set tapdelays based on clk phase delays   Jaehoon Chung
• [PATCH v2 2/4] spi: Remove uses of #ifndef __U_BOOT__ from spi-mem.c   Wolfgang Denk
• [PATCH] board/freescale/common: fix a bug that failed to read/write eeprom on ls1021atsn   Vladimir Oltean
• [PATCH v2 5/8] mmc: zynq_sdhci: Set tapdelays based on clk phase delays   Ashok Reddy Soma
• [PATCH] mtd: spi: Fix incorrect indentation   Michal Simek
• [PATCH] spi: zynq_qspi: Add function description   Michal Simek
• [PATCH] xilinx: versal: Introduce board_fit_config_name_match() for Versal   Michal Simek
• [PATCH v3 0/8] mmc: zynqmp_sdhci: Add support for Tap delay   Michal Simek
• [PATCH v3 1/8] Revert "mmc: zynq: parse dt when probing"   Michal Simek
• [PATCH v3 2/8] mmc: Define timing macro's   Michal Simek
• [PATCH v3 3/8] mmc: zynq_sdhci: Move macro to the top   Michal Simek
• [PATCH v3 4/8] mmc: zynq_sdhci: Read clock phase delays from dt   Michal Simek
• [PATCH v3 5/8] mmc: zynq_sdhci: Set tapdelays based on clk phase delays   Michal Simek
• [PATCH v3 6/8] mmc: zynq_sdhci: Add clock phase delays for Versal   Michal Simek
• [PATCH v3 7/8] mmc: zynq_sdhci: Extend UHS timings till hs200   Michal Simek
• [PATCH v3 8/8] mmc: zynq_sdhci: Add common function to set input/output tapdelays   Michal Simek
• [PATCH v2 00/10] net: ti: icssg: Add prueth support   Christian Gmeiner
• [PATCH v2 00/10] net: ti: icssg: Add prueth support   Roger Quadros
• [PATCH 05/18] mips: mtmips: add support for MediaTek MT7620 SoC   Daniel Schwierzeck
• [PATCH v2] xilinx: Consolidate board_fit_config_name_match() for Xilinx platforms   Michal Simek
• [PATCH 06/18] mips: mtmips: add two reference boards for mt7620   Daniel Schwierzeck
• [PATCH] Makefile: Correctly propagate failure when removing target   Pali Rohár
• [PATCH v2 5/7] riscv: dts: Add device tree for Microchip Icicle Kit   Bin Meng
• [PATCH v2 6/7] riscv: Add Microchip MPFS Icicle Kit support   Bin Meng
• [PATCH 5/5] mips: octeon: tools: Add update_octeon_header tool   Daniel Schwierzeck
• [PATCH 1/5] mips: start.S: Add Octeon boot header compatibility   Daniel Schwierzeck
• [PATCH 0/6] Allwinner V3/S3 support + PineCube support   Icenowy Zheng
• [PATCH 1/6] sunxi: add V3/S3 support   Icenowy Zheng
• [PATCH 2/6] sunxi: gpio: introduce compatible string for V3 GPIO   Icenowy Zheng
• [PATCH 3/6] clk: sunxi: add compatible string for V3   Icenowy Zheng
• [PATCH 4/6] sunxi: allow to use AXP20[39] attached to I2C0 on V3 series   Icenowy Zheng
• [PATCH 5/6] sunxi: dts: sync Allwinner V3s-related DTs from Linux 5.10-rc1   Icenowy Zheng
• [PATCH 6/6] sunxi: add PineCube board   Icenowy Zheng
• [PATCH v2 2/2] rtc: provide an emulated RTC   Grant Likely
• [PATCH] dfu: Fix handling of UBI partitions in MTD backend   Lukasz Majewski
• [PATCH 15/17] pytest: Collect SPL unit tests   Stephen Warren
• [PATCH] tools: dumpimage: Remove remaining mentions of the -i option   Tyler Hicks
• [PATCH 15/17] pytest: Collect SPL unit tests   Simon Glass
• [PATCH 6/6] sunxi: add PineCube board   Maxime Ripard
• [PATCH v2] nokia_rx51: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH v2 4/5] sunxi: video: v3s: Enable LCD support   Maxime Ripard
• [PATCH v2 2/2] rtc: provide an emulated RTC   Heinrich Schuchardt
• [PATCH 16/25] binman: Avoid reporting image-pos with compression   Simon Glass
• [PATCH 00/33] stm32: enable logging features   Simon Glass
• [PATCH v3 1/5] i2c: mediatek: add basic driver support   Simon Glass
• [PATCH 10/25] binman: Move section-building code into a function   Simon Glass
• [PATCH v2 5/5] sunxi: add drivers and configs needed for LCD display   Maxime Ripard
• [linux-sunxi] Re: [PATCH 6/6] sunxi: add PineCube board   Icenowy Zheng
• [PATCH] at91sam9: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] at91sam9n12ek: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] eb_cpu5282: fix CONFIG_DM_VIDEO build warnings   Anatolij Gustschin
• [PATCH] imx: mx6sxsabresd: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] imx: mx7dsabresd: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] ls1021aqds: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] ls1021atwr: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] mx23evk: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] picosam9g45: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] sansa_fuze_plus: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] xfi3: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH v2] nokia_rx51: disable obsolete VIDEO config   Anatolij Gustschin
• Please pull u-boot-video   Anatolij Gustschin
• Pull request: u-boot-riscv/master 20201026   Tom Rini
• [PATCH v4 0/7] wdt: Add support for watchdogs on Kendryte K210   Tom Rini
• [PATCH 1/2] power: twl4030: Add twl4030_i2c_read() function   Pali Rohár
• [PATCH 2/2] Nokia RX-51: Convert to CONFIG_DM_I2C   Pali Rohár
• [PATCH v3 3/8] mmc: zynq_sdhci: Move macro to the top   Jaehoon Chung
• [PATCH v3 4/8] mmc: zynq_sdhci: Read clock phase delays from dt   Jaehoon Chung
• [PATCH v3 5/8] mmc: zynq_sdhci: Set tapdelays based on clk phase delays   Jaehoon Chung
• [PATCH v3 6/8] mmc: zynq_sdhci: Add clock phase delays for Versal   Jaehoon Chung
• [PATCH v3 7/8] mmc: zynq_sdhci: Extend UHS timings till hs200   Jaehoon Chung
• U-Boot i2c bus num 1 is broken on Nokia N900   Pali Rohár
• [PATCH 2/2] Nokia RX-51: Convert to CONFIG_DM_I2C   Tom Rini
• SPI Boot - Rock Pi 4   Anthony Davies
• [PATCH 16/25] binman: Avoid reporting image-pos with compression   Alper Nebi Yasak
• [PATCH v2] Nokia RX-51: Convert to CONFIG_DM_I2C   Pali Rohár
• [PATCH 10/25] binman: Move section-building code into a function   Alper Nebi Yasak
• [PATCH v2 00/28] binman: Support compression of sections   Simon Glass
• [PATCH v2 01/28] binman: Update the entry docs   Simon Glass
• [PATCH v2 02/28] binman: Drop unused return variable for _DoTestFile()   Simon Glass
• [PATCH v2 03/28] binman: Add tests for skip-at-start sections   Simon Glass
• [PATCH v2 04/28] binman: Give a sensible error if no command is given   Simon Glass
• [PATCH v2 05/28] binman: Fix return from u-boot-ucode if there is no DT   Simon Glass
• [PATCH v2 06/28] binman: Remove references to 'image' in entry_Section   Simon Glass
• [PATCH v2 07/28] binman: Expand the error message for breaching a section   Simon Glass
• [PATCH v2 08/28] binman: Move CompressData() into Entry base class   Simon Glass
• [PATCH v2 09/28] binman: Use 'files-compress' to set compression for files   Simon Glass
• [PATCH v2 10/28] binman: Update testPackExtra with more checks   Simon Glass
• [PATCH v2 11/28] binman: Expand docs and test for padding   Simon Glass
• [PATCH v2 12/28] binman: Expand docs and test for alignment   Simon Glass
• [PATCH v2 13/28] binman: Move section-building code into a function   Simon Glass
• [PATCH v2 14/28] binman: Refactor _BuildSectionData()   Simon Glass
• [PATCH v2 15/28] binman: Move section padding to the parent   Simon Glass
• [PATCH v2 16/28] binman: Make section padding consistent with other entries   Simon Glass
• [PATCH v2 17/28] binman: Store the original data before compression   Simon Glass
• [PATCH v2 18/28] binman: Set section contents in GetData()   Simon Glass
• [PATCH v2 19/28] binman: Avoid reporting image-pos with compression   Simon Glass
• [PATCH v2 20/28] binman: Drop Entry.CheckOffset()   Simon Glass
• [PATCH v2 21/28] binman: Move sort and expand to the main Pack() function   Simon Glass
• [PATCH v2 22/28] binman: Drop the Entry.CheckSize() method   Simon Glass
• [PATCH v2 23/28] binman: Call CheckSize() from the section's Pack() method   Simon Glass
• [PATCH v2 24/28] binman: Drop CheckEntries()   Simon Glass
• [PATCH v2 25/28] binman: Update CheckEntries() for compressed sections   Simon Glass
• [PATCH v2 26/28] binman: Use the actual contents in CheckSize()   Simon Glass
• [PATCH v2 27/28] binman: Support compression of sections   Simon Glass
• [PATCH v2 28/28] binman: Avoid calculated section data repeatedly   Simon Glass
• [PATCH v2] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• how to use SPL_MULTI_DTB_FIT?   Tim Harvey
• [PATCH 05/18] mips: mtmips: add support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 5/7] riscv: dts: Add device tree for Microchip Icicle Kit   Atish Patra
• [PATCH 06/18] mips: mtmips: add two reference boards for mt7620   Weijie Gao
• [PATCH] dm: core: fix typo in device.h   Simon Glass
• [PATCH v2 1/1] sandbox: make SDL window resizable   Simon Glass
• [PATCH 05/20] dtoc: Fix widening of int to bytes   Simon Glass
• [PATCH 04/20] dm: core: Allow dm_warn() to be used in SPL   Simon Glass
• [PATCH 03/20] dtoc: Order the structures internally by name   Simon Glass
• [PATCH 02/20] dtoc: Document the return value of scan_structs()   Simon Glass
• [PATCH 01/20] sandbox: Drop ad-hoc device declarations in SPL   Simon Glass
• [PATCH 09/17] dm: test: Disable some tests that should not run in SPL   Simon Glass
• [PATCH 08/17] dm: test: Make use of CONFIG_UNIT_TEST   Simon Glass
• [PATCH 07/17] dm: test: Update Makefile conditions   Simon Glass
• [PATCH 06/17] dm: test: Sort the Makefile   Simon Glass
• [PATCH 04/17] dm: core: Avoid void * in the of-platdata structs   Simon Glass
• [PATCH 03/17] dm: core: Expand the comment for DM_GET_DEVICE()   Simon Glass
• [PATCH 02/17] dtoc: Use a namedtuple for _links   Simon Glass
• [PATCH 01/17] dtoc: Extract inner loop from output_node()   Simon Glass
• [PATCH 08/12] binman: Support multiple images in the library   Simon Glass
• [PATCH 07/12] binman: Add a way to read the ROM offset   Simon Glass
• [PATCH 08/18] serial: add uart driver for MediaTek MT7620 SoC   Simon Glass
• [PATCH 13/18] gpio: add GPIO controller driver for MediaTek MT7620 SoC   Simon Glass
• [PATCH v4 4/7] Kconfig: Increase the pre-relocation memory   Simon Glass
• [PATCH v4 5/7] test: Add tests for the multiplexer framework   Simon Glass
• [PATCH v4 7/7] test: mux-cmd: Add tests for the 'mux' command   Simon Glass
• [PATCH v4 6/7] cmd: Add a mux command   Simon Glass
• [PATCH 1/1] test: fix build failure for syslog_test   Simon Glass
• [PATCH v2 1/3] log: move processing_msg to global data   Simon Glass
• [PATCH v2 2/3] log: allow for message continuation   Simon Glass
• [PATCH] test: log: Actually test enable/disable output   Simon Glass
• [PATCH v3 1/2] dm: core: add function uclass_probe_all() to probe all devices   Simon Glass
• [PATCH] video: rockchip: Restrict EDP, VOP, MIPI files to GPL-2.0   Simon Glass
• [PATCH 1/1] log: correct and check array size of log categories   Simon Glass
• [PATCH 1/1] input: add support for FN1 - FN10 on crosswire kbd   Simon Glass
• [PATCH 1/2] rockchip: rk3399: Re-init clocks in U-Boot proper   Simon Glass
• [PATCH 2/2] rockchip: gru: Allow setting up clocks in U-Boot proper   Simon Glass
• [PATCH 1/5] sandbox: eth-raw: do not close the console input   Simon Glass
• [PATCH 2/5] sandbox: enable poweroff command   Simon Glass
• [PATCH 3/5] test/py: test poweroff   Simon Glass
• [PATCH 4/5] sandbox: implement reset   Simon Glass
• [PATCH 5/5] test: adjust sysreset tests   Simon Glass
• [PATCH v2 1/2] Makefile: provide constant with seconds since epoch   Simon Glass
• [PATCH v2 2/2] rtc: provide an emulated RTC   Simon Glass
• [PATCH v2 21/30] patman: Require tags to be before sign-off   Simon Glass
• [PATCH v2 21/30] patman: Require tags to be before sign-off   Jonathan Nieder
• [PATCH v2 0/5] doc: board: xilinx: Update Xilinx documentation   Michal Simek
• [PATCH] arm64L: zynqmp: Add missing support for 9cg version   Michal Simek
• [PATCH] arm64: zynqmp: Enable EMMC boot   Michal Simek
• [PATCH] spi: xilinx_spi: Remove unused variable   Michal Simek
• [PATCH v2 0/5] microblaze: Switch to distro boot   Michal Simek
• [PATCH] arm64: versal: Update mini u-boot eMMC node parameters   Michal Simek
• [PATCH] config: versal: Update mini u-boot timer clock to 100Mhz   Michal Simek
• [PATCH 0/4] arm64: zynqmp: Enable loading FPGA by SPL   Michal Simek
• [PATCH] arm64: zynqmp: Enable cache command   Michal Simek
• [PATCH] arm64: zynqmp: Get rid of iommus/power-domains properties for SPL DT   Michal Simek
• [PATCH v2 0/4] arm: zynqmp: Add zynqmp specific command for security features   Michal Simek
• [PATCH v2] nokia_rx51: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] dt-bindings: arm64: versal: Add clk and power headers   Michal Simek
• [PATCH] spi: xilinx_spi: remove unused local variable   Michal Simek
• [PATCH 0/3] xilinx: board: Add support for board eeproms   Michal Simek
• [PATCH v2] serial: pl01x: Add error value checking   Michal Simek
• [PATCH v2] spi: zynq_spi: Use clk subsystem to get reference spi clk   Michal Simek
• [PATCH v2] spi: zynq_qspi: Use clk subsystem to get reference qspi clk   Michal Simek
• [PATCH v4 0/2] Add support for loading images above 4GB   Michal Simek
• [PATCH] xilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board Kconfig   Michal Simek
• [PATCH] microblaze: Enable i2c DM by default   Michal Simek
• [PATCH 0/4] Add support for I2C Legacy/FRU decoding   Michal Simek
• [PATCH 0/4] xilinx: zynqmp: Fixes for silicon ID detection   Michal Simek
• [PATCH 00/10] xilinx: common: Several minor fixups   Michal Simek
• [PATCH 0/2] microblaze: Reuse xilinx common setup   Michal Simek
• [PATCH 10/10] arm64: versal: Set initrd_high to as high as possible   Michal Simek
• [PATCH 4/5] sandbox: implement reset   Heinrich Schuchardt
• [PATCH 8/8] imx8mm_evk: add fastboot support   Wolfgang Denk
• [PATCH 7/8] usb: ci_udc: Convert driver to DM_USB_GADGET   Wolfgang Denk
• [PATCH] nokia_rx51: re-enable CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV   Anatolij Gustschin
• [PATCH 4/5] sandbox: implement reset   Heinrich Schuchardt
• [PATCH 8/8] imx8mm_evk: add fastboot support   Peng Fan
• [PATCH 7/8] usb: ci_udc: Convert driver to DM_USB_GADGET   Peng Fan
• [PATCH 7/8] usb: ci_udc: Convert driver to DM_USB_GADGET   Wolfgang Denk
• [PATCH 7/8] usb: ci_udc: Convert driver to DM_USB_GADGET   Peng Fan
• [PATCH v2] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• [PATCH v2] nokia_rx51: disable obsolete VIDEO config   Anatolij Gustschin
• [PATCH] xilinx: Enable SPI driver for Versal   Michal Simek
• [PATCH 7/8] usb: ci_udc: Convert driver to DM_USB_GADGET   Wolfgang Denk
• [PATCH] nokia_rx51: re-enable CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV   Pali Rohár
• [PATCH 7/8] usb: ci_udc: Convert driver to DM_USB_GADGET   Peng Fan
• [PATCH 1/1] board: freescale: vid.c: Initialize variable 'i2caddress'   Priyanka Singh
• [PATCH 1/1] board: freescale: vid.c: Initialize variable 'i2caddress'   Priyanka Singh
• [PATCH 7/8] usb: ci_udc: Convert driver to DM_USB_GADGET   Wolfgang Denk
• [RFC PATCH] scripts/setlocalversion: avoid keeping double-quotes in UBOOTRELEASE   Rasmus Villemoes
• [PATCH 4/5] sandbox: implement reset   Rasmus Villemoes
• [patch v2 00/10] rk3399 (Pinebook pro) EDP support   Arnaud Patard (Rtp)
• [patch v2 01/10] drivers/video/rockchip/rk_vop.c: Use endpoint compatible string to find VOP mode   Arnaud Patard (Rtp)
• [patch v2 02/10] drivers/video/rockchip/rk_edp.c: Add rk3399 support   Arnaud Patard (Rtp)
• [patch v2 03/10] drivers/video/rockchip/rk_edp.c: Change interrupt polarity configuration   Arnaud Patard (Rtp)
• [patch v2 04/10] drivers/video/rockchip/rk_vop.c: Reserve efi fb memory   Arnaud Patard (Rtp)
• [patch v2 05/10] rk3399-pinebook-pro-u-boot.dtsi: Enable edp   Arnaud Patard (Rtp)
• [patch v2 06/10] configs/pinebook-pro-rk3399_defconfig: enable SYS_USB_EVENT_POLL_VIA_INT_QUEUE   Arnaud Patard (Rtp)
• [patch v2 07/10] drivers/pwm/rk_pwm.c: Fix default polarity   Arnaud Patard (Rtp)
• [patch v2 08/10] drivers/video/rockchip/rk_vop.c: Fix format of fbbase in debug string   Arnaud Patard (Rtp)
• [patch v2 09/10] drivers/video/rockchip/rk_edp.c: Add missing reset support   Arnaud Patard (Rtp)
• [patch v2 10/10] drivers/video/rockchip/rk_vop.c: Add reset support   Arnaud Patard (Rtp)
• [PATCH 4/5] sandbox: implement reset   Heinrich Schuchardt
• Reading from a Ubifs filesystem on LS1046 Freeway   Jan Hoogerbrugge
• [patch v2 05/10] rk3399-pinebook-pro-u-boot.dtsi: Enable edp   Peter Robinson
• [PATCH 4/5] sandbox: implement reset   Rasmus Villemoes
• Please pull u-boot-video   Tom Rini
• [PATCH] nokia_rx51: re-enable CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV   Tom Rini
• [PATCH 4/5] sandbox: implement reset   Heinrich Schuchardt
• [PATCH 1/2] Add HMAC-SHA-256   GlovePuppet
• [PATCH 2/2] Add TPM2 Unseal command and supporting functions   GlovePuppet
• [PATCH v2 00/14] vboot: Fix forged-configuration vulnerability   Simon Glass
• Closing the merge window Wednesday   Tom Rini
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Tom Rini
• [PATCH v3 04/23] log: Add new category names to log_cat_name   Tom Rini
• [PATCH v3 04/23] log: Add new category names to log_cat_name   Sean Anderson
• [PATCH v3 04/23] log: Add new category names to log_cat_name   Tom Rini
• [PATCH v2 0/8] sandbox: implement cold reset   Heinrich Schuchardt
• [PATCH v2 1/8] sandbox: eth-raw: do not close the console input   Heinrich Schuchardt
• [PATCH v2 2/8] sandbox: enable poweroff command   Heinrich Schuchardt
• [PATCH v2 3/8] test/py: test poweroff   Heinrich Schuchardt
• [PATCH v2 4/8] sandbox: use O_CLOEXEC in os_open()   Heinrich Schuchardt
• [PATCH v2 5/8] sandbox: implement reset   Heinrich Schuchardt
• [PATCH v2 6/8] test: adjust sysreset tests   Heinrich Schuchardt
• [PATCH v2 7/8] sandbox: update function descriptions in os.h   Heinrich Schuchardt
• [PATCH v2 8/8] doc: add sandbox API   Heinrich Schuchardt
• [PATCH v2 5/8] sandbox: implement reset   Rasmus Villemoes
• [PATCH v3 0/8] sandbox: implement cold reset   Heinrich Schuchardt
• [PATCH v3 1/8] sandbox: eth-raw: do not close the console input   Heinrich Schuchardt
• [PATCH v3 2/8] sandbox: enable poweroff command   Heinrich Schuchardt
• [PATCH v3 3/8] test/py: test poweroff   Heinrich Schuchardt
• [PATCH v3 4/8] sandbox: use O_CLOEXEC in os_open()   Heinrich Schuchardt
• [PATCH v3 5/8] sandbox: implement reset   Heinrich Schuchardt
• [PATCH v3 6/8] test: adjust sysreset tests   Heinrich Schuchardt
• [PATCH v3 7/8] sandbox: update function descriptions in os.h   Heinrich Schuchardt
• [PATCH v3 8/8] doc: add sandbox API   Heinrich Schuchardt
• Please pull u-boot-video   Anatolij Gustschin
• Please pull u-boot-video   Tom Rini
• Please pull u-boot-video   Anatolij Gustschin
• [PATCH 1/1] efi_loader: daylight saving time   Heinrich Schuchardt
• [PATCH v2 21/30] patman: Require tags to be before sign-off   Sean Anderson
• [PATCH v3 23/23] doc: Update logging documentation   Tom Rini
• [PATCH v3 23/23] doc: Update logging documentation   Heinrich Schuchardt
• [PATCH v3 21/23] test: Add a test for log filter-*   Tom Rini
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH v3 23/23] doc: Update logging documentation   Sean Anderson
• [PATCH v3 21/23] test: Add a test for log filter-*   Sean Anderson
• [PATCH v3 21/23] test: Add a test for log filter-*   Tom Rini
• [PATCH v2 1/2] rockchip: rk3399: Init clocks in U-Boot proper if SPL was not run   Alper Nebi Yasak
• [PATCH v2 2/2] rockchip: gru: Allow setting up clocks in U-Boot proper   Alper Nebi Yasak
• [PATCH] arm: sunxi: disable obsolete VIDEO config   Maxime Ripard
• [PATCH 1/2] video: simple_panel: Add sharp,lq123p1jx31 display   Alper Nebi Yasak
• [PATCH 2/2] video: simple_panel: Add boe,nv101wxmn51 display   Alper Nebi Yasak
• [PATCH 1/2] power: twl4030: Add twl4030_i2c_read() function   Jaehoon Chung
• [PATCH 2/2] video: simple_panel: Add boe,nv101wxmn51 display   Mark Kettenis
• [PATCH 1/2] power: twl4030: Add twl4030_i2c_read() function   Pali Rohár
• [patch v2 00/10] rk3399 (Pinebook pro) EDP support   Alper Nebi Yasak
• [PATCH v9 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
• [PATCH v9 0/2] Basic Kontron SMARC-sAL28 board support   Tom Rini
• [patch v2 01/10] drivers/video/rockchip/rk_vop.c: Use endpoint compatible string to find VOP mode   Alper Nebi Yasak
• [patch v2 02/10] drivers/video/rockchip/rk_edp.c: Add rk3399 support   Alper Nebi Yasak
• [patch v2 03/10] drivers/video/rockchip/rk_edp.c: Change interrupt polarity configuration   Alper Nebi Yasak
• [patch v2 04/10] drivers/video/rockchip/rk_vop.c: Reserve efi fb memory   Alper Nebi Yasak
• [patch v2 07/10] drivers/pwm/rk_pwm.c: Fix default polarity   Alper Nebi Yasak
• [patch v2 08/10] drivers/video/rockchip/rk_vop.c: Fix format of fbbase in debug string   Alper Nebi Yasak
• [patch v2 09/10] drivers/video/rockchip/rk_edp.c: Add missing reset support   Alper Nebi Yasak
• [patch v2 10/10] drivers/video/rockchip/rk_vop.c: Add reset support   Alper Nebi Yasak
• [PATCH 1/2] power: twl4030: Add twl4030_i2c_read() function   Jaehoon Chung
• [PATCH 2/2] video: simple_panel: Add boe,nv101wxmn51 display   Alper Nebi Yasak
• [PATCH v4 00/22] log: Add commands for manipulating filters   Sean Anderson
• [PATCH v4 01/22] log: Fix missing negation of ENOMEM   Sean Anderson
• [PATCH v4 02/22] log: Fix incorrect documentation of log_filter.cat_list   Sean Anderson
• [PATCH v4 03/22] log: Add additional const qualifier to arrays   Sean Anderson
• [PATCH v4 04/22] log: Use CONFIG_IS_ENABLED() for LOG_TEST   Sean Anderson
• [PATCH v4 05/22] log: Expose some helper functions   Sean Anderson
• [PATCH v4 06/22] log: Add function to create a filter with flags   Sean Anderson
• [PATCH v4 07/22] log: Add filter flag to deny on match   Sean Anderson
• [PATCH v4 08/22] test: log: Convert log_test from python to C   Sean Anderson
• [PATCH v4 09/22] test: log: Give tests names instead of numbers   Sean Anderson
• [PATCH v4 10/22] test: Add tests for LOGFF_DENY   Sean Anderson
• [PATCH v4 11/22] log: Add filter flag to match greater than a log level   Sean Anderson
• [PATCH v4 12/22] test: Add test for LOGFF_MIN   Sean Anderson
• [PATCH v4 13/22] cmd: log: Use sub-commands for log   Sean Anderson
• [PATCH v4 14/22] cmd: log: Split off log level parsing   Sean Anderson
• [PATCH v4 15/22] cmd: log: Add commands to list categories and drivers   Sean Anderson
• [PATCH v4 16/22] cmd: log: Make "log level" print all log levels   Sean Anderson
• [PATCH v4 17/22] lib: Add getopt   Sean Anderson
• [PATCH v4 18/22] test: Add a test for getopt   Sean Anderson
• [PATCH v4 19/22] cmd: log: Add commands to manipulate filters   Sean Anderson
• [PATCH v4 20/22] test: Add a test for log filter-*   Sean Anderson
• [PATCH v4 21/22] doc: Add log kerneldocs to documentation   Sean Anderson
• [PATCH v4 22/22] doc: Update logging documentation   Sean Anderson
• [PATCH v5 18/27] misc: am33xx: add control module driver   Simon Glass
• [PATCH 2/2] cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2   Simon Glass
• [PATCH] Makefile: Correctly propagate failure when removing target   Simon Glass
• [PATCH] Makefile: Correctly propagate failure when removing target   Pali Rohár
• [PATCH v2 1/7] riscv: Add DMA 64-bit address support   Padmarao Begari
• [PATCH v2 2/7] net: macb: Add DMA 64-bit address support for macb   Padmarao Begari
• [PATCH v2 3/7] net: macb: Add phy address to read it from device tree   Padmarao Begari
• [PATCH v2 4/7] clk: Add Microchip PolarFire SoC clock driver   Padmarao Begari
• [PATCH v2 5/7] riscv: dts: Add device tree for Microchip Icicle Kit   Padmarao Begari
• [PATCH v2 5/7] riscv: dts: Add device tree for Microchip Icicle Kit   Padmarao Begari
• [PATCH v2 5/7] riscv: dts: Add device tree for Microchip Icicle Kit   Padmarao Begari
• [PATCH v2 6/7] riscv: Add Microchip MPFS Icicle Kit support   Padmarao Begari
• [PATCH v2 6/7] riscv: Add Microchip MPFS Icicle Kit support   Padmarao Begari
• U-Boot i2c bus num 1 is broken on Nokia N900   Heiko Schocher
• [PATCH 1/5] mips: start.S: Add Octeon boot header compatibility   Stefan Roese
• [PATCH 1/2] Add HMAC-SHA-256   Wolfgang Denk
• [PATCH 2/2] Add TPM2 Unseal command and supporting functions   Wolfgang Denk
• [PATCH] imx8mp_evk: README instruction fixes   Baruch Siach
• [PATCH 5/5] mips: octeon: tools: Add update_octeon_header tool   Stefan Roese
• [PATCH 1/2] pinctrl: stm32: display bias information for all pins   Patrick Delaunay
• [PATCH 2/2] gpio: stm32: correct the bias management   Patrick Delaunay
• [PATCH 1/2] pinctrl: stmfx: update pincontrol and gpio device name   Patrick Delaunay
• [PATCH 2/2] pinctrl: stmfx: update pin name   Patrick Delaunay
• [PATCH v1 1/9] toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skus   Igor Opaniuk
• [PATCH v1 2/9] pca9450a: fix i2c address   Igor Opaniuk
• [PATCH v1 3/9] power: pmic: add SPL_DM_PMIC_PCA9450 symbol to Kconfig   Igor Opaniuk
• [PATCH v1 4/9] ARM: dts: imx8mm-verdin: follow changed pmic   Igor Opaniuk
• [PATCH v1 5/9] verdin-imx8mm: spl: switch to pca9450 pmic   Igor Opaniuk
• [PATCH v1 6/9] verdin-imx8mm: implement hardware version detection   Igor Opaniuk
• [PATCH v1 7/9] verdin-imx8mm: spl: enable pca9450 i2c level translator   Igor Opaniuk
• [PATCH v1 8/9] toradex: tdx-cfg-clock: fix i.mx 8m mini interactive   Igor Opaniuk
• [PATCH v1 9/9] verdin-imx8mm: automatic ram size detection   Igor Opaniuk
• [PATCH 1/2] cmd: pinmux: update result of do_status   Patrick Delaunay
• [PATCH 2/2] cmd: pinmux: support pin name in status command   Patrick Delaunay
• [PATCH 2/2] gpio: stm32: correct the bias management   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick DELAUNAY
• [PATCH 0/8] Pin control support for RZ/G2[HN]   Biju Das
• [PATCH 1/8] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• [PATCH 2/8] pinctrl: renesas: r8a77951: Add R8A774E1 PFC support   Biju Das
• [PATCH 3/8] pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A774A1   Biju Das
• [PATCH 4/8] pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A774B1   Biju Das
• [PATCH 5/8] pinctrl: renesas: r8a7795: Optimize pinctrl image size for R8A774E1   Biju Das
• [PATCH RFC 6/8] pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A7796   Biju Das
• [PATCH RFC 7/8] pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A77965   Biju Das
• [PATCH RFC 8/8] pinctrl: renesas: r8a7795: Optimize pinctrl image size for R8A7795   Biju Das
• [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• U-Boot i2c bus num 1 is broken on Nokia N900   Pali Rohár
• [PATCH v9 0/2] Basic Kontron SMARC-sAL28 board support   Priyanka Jain
• [PATCH v2 1/5] arm: dts: armada-cp110-slave: add missing cps_nand   Stefan Roese
• [PATCH v2 2/5] arm: dts: armada-cp110-master: update nand-controller   Stefan Roese
• [PATCH v2 3/5] mtd: pxa3xx_nand: port to use driver model   Stefan Roese
• [PATCH v2 4/5] mtd: pxa3xx_nand: remove dead code   Stefan Roese
• [PATCH v2 5/5] mtd: nand: pxa3xx: enable NAND controller if the SoC needs it   Stefan Roese
• Pull request for UEFI sub-system for efi-2021-01-rc2   Heinrich Schuchardt
• [PATCH 00/33] stm32: enable logging features   Patrick DELAUNAY
• [PATCH 1/4] IPQ40xx: clk: use dev_read_addr()   Robert Marko
• [PATCH 2/4] IPQ40xx: clk: drop breaks in switch case   Robert Marko
• [PATCH 3/4] IPQ40xx: clk: dont always return 0   Robert Marko
• [PATCH 4/4] IPQ40xx: clk: add USB clock handling   Robert Marko
• [PATCH] ram: rockchip: px30: add a config-based ddr selection   Jagan Teki
• [PATCH v4 0/8] rockchip: Add Engicam PX30.Core support   Jagan Teki
• [PATCH v4 1/8] arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH v4 2/8] arm64: dts: rockchip: Add Engicam PX30.Core SOM   Jagan Teki
• [PATCH v4 3/8] rockchip: px30: Add EVB_PX30 Kconfig help   Jagan Teki
• [PATCH v4 4/8] board: engicam: Attach i.MX6 common code   Jagan Teki
• [PATCH v4 5/8] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH v4 6/8] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0   Jagan Teki
• [PATCH v4 7/8] rockchip: Add Engicam PX30.Core C.TOUCH 2.0   Jagan Teki
• [PATCH v4 8/8] doc: rockchip: Document Rockchip miniloader flashing   Jagan Teki
• [PATCH 1/5 v2] mips: start.S: Add Octeon boot header compatibility   Stefan Roese
• [PATCH 2/5 v2] mips: octeon: Fix Octeon DDR driver to use the correct struct   Stefan Roese
• [PATCH 3/5 v2] mips: octeon: Report full DDR size in dram_init() to gd->ram_size   Stefan Roese
• [PATCH 4/5 v2] mips: octeon: bootoctlinux: Use gd->ram_size instead of ram_get_info()   Stefan Roese
• [PATCH 5/5 v2] mips: octeon: tools: Add update_octeon_header tool   Stefan Roese
• [PATCH v2 1/3] log: move processing_msg to global data   Tom Rini
• [PATCH v2 2/3] log: allow for message continuation   Tom Rini
• [PATCH v2 3/3] test: log: test message continuation   Tom Rini
• [PATCH 1/1] log: correct and check array size of log categories   Tom Rini
• Pull request for UEFI sub-system for efi-2021-01-rc2   Tom Rini
• Speed/mode setting via "sf probe" command   Ralph Siemsen
• [PATCH 1/1] efi_loader: fix DisconnectController() for sole child   Heinrich Schuchardt
• [PATCH v4 1/7] drivers: Add a new framework for multiplexer devices   Tom Rini
• [PATCH v4 2/7] dm: board: complete the initialization of the muxes in initr_dm()   Tom Rini
• [PATCH v4 3/7] drivers: mux: mmio-based syscon mux controller   Tom Rini
• [PATCH v4 4/7] Kconfig: Increase the pre-relocation memory   Tom Rini
• [PATCH v4 5/7] test: Add tests for the multiplexer framework   Tom Rini
• [PATCH v4 6/7] cmd: Add a mux command   Tom Rini
• [PATCH v4 7/7] test: mux-cmd: Add tests for the 'mux' command   Tom Rini
• [PATCH v2 8/8] sunxi: a64: Add a defconfig for the PinePhone   Jagan Teki
• [PATCH 6/6] sunxi: add PineCube board   Jagan Teki
• [PATCH 0/6] Allwinner V3/S3 support + PineCube support   Jagan Teki
• [PATCH v4 00/13] riscv: Add SPI support for Kendryte K210   Jagan Teki
• [PATCH v4 58/59] acpi: Add more documentation for struct acpi_gpio   Andy Shevchenko
• [PATCH] ARM: dts: stm32: Drop QSPI CS2 on DHCOM   Marek Vasut
• [PATCH] ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM   Marek Vasut
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Marek Vasut
• [PATCH v1 2/9] pca9450a: fix i2c address   Jaehoon Chung
• [PATCH v1 3/9] power: pmic: add SPL_DM_PMIC_PCA9450 symbol to Kconfig   Jaehoon Chung
• [PATCH] MAINTAINERS, git-mailrc: Update sunxi maintainers   Andre Przywara
• [PATCH] imx: mx6cuboxi: Disable CONFIG_IMX_THERMAL   Simon Glass
• Failed to make encrypt amlogic vim3   Jaehoon Chung
• [RESEND PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [RESEND PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [RESEND PATCH v6 02/17] dfu: modify an argument type for an address   AKASHI Takahiro
• [RESEND PATCH v6 03/17] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [RESEND PATCH v6 04/17] dfu: export dfu_list   AKASHI Takahiro
• [RESEND PATCH v6 05/17] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
• [RESEND PATCH v6 06/17] efi_loader: add efi_create_indexed_name()   AKASHI Takahiro
• [RESEND PATCH v6 07/17] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [RESEND PATCH v6 08/17] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [RESEND PATCH v6 09/17] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [RESEND PATCH v6 10/17] efi_loader: capsule: support firmware update   AKASHI Takahiro
• [RESEND PATCH v6 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [RESEND PATCH v6 12/17] dfu: add dfu_write_by_alt()   AKASHI Takahiro
• [RESEND PATCH v6 13/17] efi_loader: add firmware management protocol for raw image   AKASHI Takahiro
• [RESEND PATCH v6 14/17] cmd: add "efidebug capsule" command   AKASHI Takahiro
• [RESEND PATCH v6 15/17] tools: add mkeficapsule command for UEFI capsule update   AKASHI Takahiro
• [RESEND PATCH v6 16/17] test/py: efi_capsule: test for FIT image capsule   AKASHI Takahiro
• [RESEND PATCH v6 17/17] test/py: efi_capsule: test for raw image capsule   AKASHI Takahiro
• [RESEND PATCH v6 00/17] efi_loader: add capsule update support   Tom Rini
• [RESEND PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• Failed to make encrypt amlogic vim3   Jaehoon Chung
• [RESEND PATCH v6 00/17] efi_loader: add capsule update support   Tom Rini
• [RESEND PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [RESEND PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v7 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v7 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v7 02/17] dfu: modify an argument type for an address   AKASHI Takahiro
• [PATCH v7 03/17] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [PATCH v7 04/17] dfu: export dfu_list   AKASHI Takahiro
• [PATCH v7 05/17] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
• [PATCH v7 06/17] efi_loader: add efi_create_indexed_name()   AKASHI Takahiro
• [PATCH v7 07/17] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [PATCH v7 08/17] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH v7 09/17] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [PATCH v7 10/17] efi_loader: capsule: support firmware update   AKASHI Takahiro
• [PATCH v7 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v7 12/17] dfu: add dfu_write_by_alt()   AKASHI Takahiro
• [PATCH v7 13/17] efi_loader: add firmware management protocol for raw image   AKASHI Takahiro
• [PATCH v7 14/17] cmd: add "efidebug capsule" command   AKASHI Takahiro
• [PATCH v7 15/17] tools: add mkeficapsule command for UEFI capsule update   AKASHI Takahiro
• [PATCH v7 16/17] test/py: efi_capsule: test for FIT image capsule   AKASHI Takahiro
• [PATCH v7 17/17] test/py: efi_capsule: test for raw image capsule   AKASHI Takahiro
• [PATCH] imx: mx6cuboxi: Disable CONFIG_IMX_THERMAL   Baruch Siach
• [PATCH 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Baruch Siach
• [PATCH 1/5] arm: dts: armada-cp110-slave: add missing cps_nand   Baruch Siach
• [PATCH 2/5] arm: dts: armada-cp110-master: update nand-controller   Baruch Siach
• [PATCH 3/5] mtd: pxa3xx_nand: port to use driver model   Baruch Siach
• [PATCH 4/5] mtd: pxa3xx_nand: remove dead code   Baruch Siach
• [PATCH 5/5] mtd: nand: pxa3xx: enable NAND controller if the SoC needs it   Baruch Siach
• [PATCH 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Stefan Roese
• pull request of u-boot-fsl-qoriq for v2021.01   Priyanka Jain
• U-Boot i2c bus num 1 is broken on Nokia N900   Ivaylo Dimitrov
• [PATCH] ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Drop QSPI CS2 on DHCOM   Patrice CHOTARD
• [PATCH] mtd: spi: Fix incorrect indentation   Michal Simek
• [PATCH] spi: zynq_qspi: Add function description   Michal Simek
• [PATCH v3 0/8] mmc: zynqmp_sdhci: Add support for Tap delay   Michal Simek
• [PATCH] xilinx: Enable SPI driver for Versal   Michal Simek
• [maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config   Lokesh Vutla
• [PATCH 5/5] mtd: nand: pxa3xx: enable NAND controller if the SoC needs it   Stefan Roese
• [PATCH] MAINTAINERS, git-mailrc: Update sunxi maintainers   Maxime Ripard
• U-Boot i2c bus num 1 is broken on Nokia N900   Heiko Schocher
• U-Boot i2c bus num 1 is broken on Nokia N900   Pali Rohár
• [PATCH 08/18] serial: add uart driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 0/2] rtc: provide an emulated RTC   Pablo Sebastián Greco
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [PATCH v1] distro_bootcmd: set devtype for dhcp boot   Igor Opaniuk
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH v2 0/2] rtc: provide an emulated RTC   Heinrich Schuchardt
• [PATCH v1] distro_bootcmd: set devtype for dhcp boot   Oleksandr Suvorov
• [PATCH] km: replace hardcoded address for imported environment   Holger Brunck
• [PATCH] km/ppc: use Kconfig for MEMTEST configuration   Holger Brunck
• [PATCH v4 0/3] Add support for LX2162AQDS board   meenakshi.aggarwal at nxp.com
• [PATCH v4 1/3] drivers/net/phy: Add CORTINA_NO_FW_UPLOAD to Kconfig   meenakshi.aggarwal at nxp.com
• [PATCH v4 2/3] armv8: lx2162a: Add Soc changes to support LX2162A   meenakshi.aggarwal at nxp.com
• [PATCH v4 3/3] armv8: lx2162aqds: Add support for LX2162AQDS platform   meenakshi.aggarwal at nxp.com
• [GIT PULL] xilinx patches for v2021.01-v2   Michal Simek
• [PATCH 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Stefan Roese
• [PATCH 0/3] phy: marvell: cp110: fix Armada 8k rev B0 boot hang   Stefan Roese
• [PATCH] arm: octeontx: Enable network support in supported boards   Stefan Roese
• [PATCH 08/18] serial: add uart driver for MediaTek MT7620 SoC   Simon Glass
• Please pull u-boot-marvell/master   Stefan Roese
• stm32mp: The purpose of "!tee_find_device()"   Alex G.
• [ANN] U-Boot v2021.01-rc1 released   Tom Rini
• [RESEND PATCH v6 00/17] efi_loader: add capsule update support   Tom Rini
• [PATCH v7 00/17] efi_loader: add capsule update support   Tom Rini
• [PATCH v7 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Tom Rini
• [PATCH v7 02/17] dfu: modify an argument type for an address   Tom Rini
• [PATCH v7 03/17] common: update: add a generic interface for FIT image   Tom Rini
• [PATCH v1 4/9] ARM: dts: imx8mm-verdin: follow changed pmic   Marcel Ziswiler
• [PATCH v7 04/17] dfu: export dfu_list   Tom Rini
• [PATCH v7 12/17] dfu: add dfu_write_by_alt()   Tom Rini
• [PATCH v4 2/3] armv8: lx2162a: Add Soc changes to support LX2162A   Tom Rini
• [PATCH v1 5/9] verdin-imx8mm: spl: switch to pca9450 pmic   Marcel Ziswiler
• [PATCH v1 6/9] verdin-imx8mm: implement hardware version detection   Marcel Ziswiler
• [PATCH v1 7/9] verdin-imx8mm: spl: enable pca9450 i2c level translator   Marcel Ziswiler
• [PATCH v1 1/9] toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skus   Marcel Ziswiler
• [PATCH] imx: mx6cuboxi: Disable CONFIG_IMX_THERMAL   Tom Rini
• [ANN] U-Boot v2021.01-rc1 released   Michal Simek
• [PATCH] MAINTAINERS, git-mailrc: Update sunxi maintainers   Tom Rini
• pull request of u-boot-fsl-qoriq for v2021.01   Tom Rini
• [ANN] U-Boot v2021.01-rc1 released   Tom Rini
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [PATCH] imx: mx6cuboxi: Disable CONFIG_IMX_THERMAL   Walter Lozano
• [PATCH] imx: mx6cuboxi: Disable CONFIG_IMX_THERMAL   Tom Rini
• [PATCH v1 9/9] verdin-imx8mm: automatic ram size detection   Oleksandr Suvorov
• [PATCH v1 7/9] verdin-imx8mm: spl: enable pca9450 i2c level translator   Oleksandr Suvorov
• [PATCH v1 4/9] ARM: dts: imx8mm-verdin: follow changed pmic   Oleksandr Suvorov
• [PATCH v1 5/9] verdin-imx8mm: spl: switch to pca9450 pmic   Oleksandr Suvorov
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [PATCH v1 8/9] toradex: tdx-cfg-clock: fix i.mx 8m mini interactive   Oleksandr Suvorov
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Jerome Forissier
• [PATCH v1 1/7] ARM: dts: fsl-imx8qxp-apalis: add initial device tree   Oleksandr Suvorov
• [PATCH v1 2/7] board: toradex: add apalis-imx8x 2gb wb it v1.1a module support   Oleksandr Suvorov
• [PATCH v1 3/7] doc: board: apalis-imx8x: add documentation   Oleksandr Suvorov
• [PATCH v1 4/7] imx8: allow overriding memory layout   Oleksandr Suvorov
• [PATCH] imx: mx6cuboxi: Disable CONFIG_IMX_THERMAL   Simon Glass
• [PATCH v2] imx: mx6cuboxi: Disable thermal driver in SPL   Simon Glass
• [PATCH v2] imx: mx6cuboxi: Disable thermal driver in SPL   Fabio Estevam
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [PATCH] drivers: led: bcm6858: set the correct led polarity register   Steven Lawrance
• [PATCH] spl: spl_fit.c: enable check of signature for config node in spl/tpl   Philippe Reynes
• [PATCH] arm: mvebu: puzzle-m801: Add a maintainer   Luka Kovacic
• Using USB Mass Storage on AM335X   Otavio Salvador
• Using USB Mass Storage on AM335X   Tom Rini
• Using USB Mass Storage on AM335X   Otavio Salvador
• [PATCH] configs: migrate CONFIG_IMX_THERMAL to defconfigs   Tom Rini
• [PATCH v2 0/2] rtc: provide an emulated RTC   Pablo Sebastián Greco
• [v2] board: freescale: sys_eeprom: update address length argument   Biwen Li
• [PATCH] mmc: Parse new binding for eMMC fixed driver type   s-tokumoto at fujitsu.com
• [PATCH] mmc: Parse new binding for eMMC fixed driver type   Peng Fan
• [PATCH 0/2] rtc: initialize emulated RTC from environment variable   Heinrich Schuchardt
• [PATCH 1/2] rtc: use probe() to initialize emulated RTC   Heinrich Schuchardt
• [PATCH 2/2] rtc: initialize emulated RTC from environment variable   Heinrich Schuchardt
• [PATCH 08/18] serial: add uart driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2] imx: mx6cuboxi: Disable thermal driver in SPL   Simon Glass
• [PATCH v2 28/28] binman: Avoid calculated section data repeatedly   Simon Glass
• [PATCH v2 26/28] binman: Use the actual contents in CheckSize()   Simon Glass
• [PATCH v2 27/28] binman: Support compression of sections   Simon Glass
• [PATCH v2 25/28] binman: Update CheckEntries() for compressed sections   Simon Glass
• [PATCH v2 24/28] binman: Drop CheckEntries()   Simon Glass
• [PATCH v2 23/28] binman: Call CheckSize() from the section's Pack() method   Simon Glass
• [PATCH v2 22/28] binman: Drop the Entry.CheckSize() method   Simon Glass
• [PATCH v2 21/28] binman: Move sort and expand to the main Pack() function   Simon Glass
• [PATCH v2 20/28] binman: Drop Entry.CheckOffset()   Simon Glass
• [PATCH v2 19/28] binman: Avoid reporting image-pos with compression   Simon Glass
• [PATCH v2 18/28] binman: Set section contents in GetData()   Simon Glass
• [PATCH v2 17/28] binman: Store the original data before compression   Simon Glass
• [PATCH v2 16/28] binman: Make section padding consistent with other entries   Simon Glass
• [PATCH v2 15/28] binman: Move section padding to the parent   Simon Glass
• [PATCH v2 14/28] binman: Refactor _BuildSectionData()   Simon Glass
• [PATCH v2 13/28] binman: Move section-building code into a function   Simon Glass
• [PATCH v2 12/28] binman: Expand docs and test for alignment   Simon Glass
• [PATCH v2 11/28] binman: Expand docs and test for padding   Simon Glass
• [PATCH v2 10/28] binman: Update testPackExtra with more checks   Simon Glass
• [PATCH v2 09/28] binman: Use 'files-compress' to set compression for files   Simon Glass
• [PATCH v2 08/28] binman: Move CompressData() into Entry base class   Simon Glass
• [PATCH v2 07/28] binman: Expand the error message for breaching a section   Simon Glass
• [PATCH v2 06/28] binman: Remove references to 'image' in entry_Section   Simon Glass
• [PATCH v2 05/28] binman: Fix return from u-boot-ucode if there is no DT   Simon Glass
• [PATCH v2 04/28] binman: Give a sensible error if no command is given   Simon Glass
• [PATCH v2 03/28] binman: Add tests for skip-at-start sections   Simon Glass
• [PATCH v2 02/28] binman: Drop unused return variable for _DoTestFile()   Simon Glass
• [PATCH v2 01/28] binman: Update the entry docs   Simon Glass
• [PATCH v2 11/11] Azure/GitLab/Travis: Add SPL unit tests   Simon Glass
• [PATCH v2 10/11] dm: test: Drop of-platdata pytest   Simon Glass
• [PATCH v2 08/11] sandbox: Allow selection of SPL unit tests   Simon Glass
• [PATCH v2 07/11] test: Run SPL unit tests   Simon Glass
• [PATCH v2 06/11] pytest: Collect SPL unit tests   Simon Glass
• [PATCH v2 05/11] Makefile: Generate a symbol file for u-boot-spl   Simon Glass
• [PATCH v2 04/11] dm: test: Add a very simple of-platadata test   Simon Glass
• [PATCH v2 02/11] dm: test: Update the test runner to support of-platdata   Simon Glass
• [PATCH v2 03/11] dm: test: Add a way to run SPL tests   Simon Glass
• [PATCH 20/20] dm: doc: Update the of-platadata documentation   Simon Glass
• [PATCH 19/20] dm: Don't allow U_BOOT_DEVICE() when of-platdata is used   Simon Glass
• [PATCH 18/20] dm: Use driver_info index instead of pointer   Simon Glass
• [PATCH 16/20] x86: apl: Enable SPI flash in TPL with APL_SPI_FLASH_BOOT   Simon Glass
• [PATCH 17/20] x86: apl: Take advantage of the of-platdata parent support   Simon Glass
• [PATCH 15/20] dm: core: Convert #ifdef to if() in root.c   Simon Glass
• [PATCH 13/20] dm: Support parent devices with of-platdata   Simon Glass
• [PATCH 14/20] dm: Add a test for of-platdata parent information   Simon Glass
• [PATCH 12/20] sandbox: Fix up building for of-platdata   Simon Glass
• [PATCH 11/20] dm: Use an allocated array for run-time device info   Simon Glass
• [PATCH 10/20] dm: test: Add a test for of-platdata phandles   Simon Glass
• [PATCH 07/20] sandbox: Allow selection of SPL unit tests   Simon Glass
• [PATCH 09/20] dm: test: Add a check that all devices have a dev value   Simon Glass
• [PATCH 06/20] dm: Add a C test for of-platdata properties   Simon Glass
• [PATCH v3 00/29] patman: Collect review tags and comments from Patchwork   Simon Glass
• [PATCH v3 01/29] patman: Correct operation of -n   Simon Glass
• [PATCH v3 02/29] azure/gitLab/travis: Add pygit2 as a dependency for tests   Simon Glass
• [PATCH v3 03/29] patman: Update how tests are run   Simon Glass
• [PATCH v3 04/29] patman: Fix whitespace errors in func_test   Simon Glass
• [PATCH v3 05/29] patman: Use capture_sys_output() consistently   Simon Glass
• [PATCH v3 06/29] patman: Fix remaining pylint3 warnings in func_test   Simon Glass
• [PATCH v3 07/29] patman: Allow linking a series with patchwork   Simon Glass
• [PATCH v3 08/29] patman: Fix indenting in patchstream   Simon Glass
• [PATCH v3 09/29] patman: Fix constant style in patchstream   Simon Glass
• [PATCH v3 10/29] patman: Rename functions in patchstream   Simon Glass
• [PATCH v3 11/29] patman: Rename variables in patchstream   Simon Glass
• [PATCH v3 12/29] patman: Drop unused args in patchstream   Simon Glass
• [PATCH v3 13/29] patman: Fix up argument/return docs in patchstream   Simon Glass
• [PATCH v3 14/29] patman: Move warning collection to a function   Simon Glass
• [PATCH v3 15/29] patman: Attach warnings to individual patches   Simon Glass
• [PATCH v3 16/29] patman: Convert 'Series-xxx' tag errors into warnings   Simon Glass
• [PATCH v3 17/29] patman: Drop unused signoff member   Simon Glass
• [PATCH v3 18/29] patman: Add a test for PatchStream tags   Simon Glass
• [PATCH v3 19/29] patman: Add some tests for warnings   Simon Glass
• [PATCH v3 20/29] patman: Convert testBasic() to use an interator   Simon Glass
• [PATCH v3 21/29] patman: Fix spelling of plural for warning   Simon Glass
• [PATCH v3 22/29] patman: Don't ignore lines starting with hash   Simon Glass
• [PATCH v3 23/29] patman: Allow showing a Commit as a string   Simon Glass
• [PATCH v3 24/29] patman: Improve handling of files   Simon Glass
• [PATCH v3 25/29] patman: Detect missing upstream in CountCommitsToBranch   Simon Glass
• [PATCH v3 26/29] patman: Support checking for review tags in patchwork   Simon Glass
• [PATCH v3 27/29] patman: Support updating a branch with review tags   Simon Glass
• [PATCH v3 28/29] patman: Support parsing of review snippets   Simon Glass
• [PATCH v3 29/29] patman: Support listing comments from patchwork   Simon Glass
• [PATCH v7 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH 1/1] env: typo enougth   Heinrich Schuchardt
• Using USB Mass Storage on AM335X   Heiko Schocher
• Using USB Mass Storage on AM335X   Lokesh Vutla
• U-Boot i2c bus num 1 is broken on Nokia N900   Ivaylo Dimitrov
• U-Boot i2c bus num 1 is broken on Nokia N900   Heiko Schocher
• [PATCH] arm: mvebu: puzzle-m801: Add a maintainer   Stefan Roese
• [PATCH v7 00/17] efi_loader: add capsule update support   Heinrich Schuchardt
• [PATCH v7 00/17] efi_loader: add capsule update support   Heinrich Schuchardt
• stm32mp: The purpose of "!tee_find_device()"   Etienne Carriere
• Using USB Mass Storage on AM335X   Lukasz Majewski
• [PATCH v7 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Lukasz Majewski
• [PATCH 0/3] mmc support for QEMU   Harm Berntsen
• [PATCH 1/3] gpio: do not include <asm/arch/gpio.h> on ARCH_QEMU   Harm Berntsen
• [PATCH 2/3] acpi: Only include asm header when available   Harm Berntsen
• [PATCH 3/3] mmc: Only retrieve cd pin when GPIO is enabled   Harm Berntsen
• [PATCH v2 00/21] Add support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 01/21] mips: dts: switch to board defines for dtb for mtmips   Weijie Gao
• [PATCH v2 02/21] mips: mtmips: move mt7628 related Kconfig into mt7628 subdirectory   Weijie Gao
• [PATCH v2 03/21] mips: mtmips: select SYSRESET for mt7628 only   Weijie Gao
• [PATCH v2 04/21] mips: mtmips: fix dram size detection in dram_init   Weijie Gao
• [PATCH v2 05/21] mips: enable _machine_restart for spl   Weijie Gao
• [PATCH v2 06/21] mips: mtmips: add support to initialize SDRAM   Weijie Gao
• [PATCH v2 07/21] mips: mtmips: add support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 08/21] mips: mtmips: add two reference boards for mt7620   Weijie Gao
• [PATCH v2 09/21] configs: mtmips: refresh for mt7628 based boards   Weijie Gao
• [PATCH v2 10/21] serial: add uart driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 11/21] clk: add clock driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 12/21] reset: mtmips: add reset controller support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 13/21] pinctrl: mtmips: add support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 14/21] watchdog: add watchdog driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 15/21] gpio: add GPIO controller driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 16/21] spi: add spi controller support for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 17/21] phy: add USB PHY driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 18/21] net: add ethernet driver for MediaTek MT7620 SoC   Weijie Gao
• [PATCH v2 19/21] mmc: mtk-sd: add pad control settings for MediaTek MT7620/MT76x8 SoCs   Weijie Gao
• [PATCH v2 20/21] reset: reset-mtmips: add DM_FLAG_PRE_RELOC flag   Weijie Gao
• [PATCH v2 21/21] MAINTAINERS: add maintainer for MediaTek MIPS platform   Weijie Gao
• [PATCH] rockchip: Rock960: fix up USB support   Kever Yang
• [PATCH] ram: rockchip: px30: add a config-based ddr selection   Kever Yang
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Kever Yang
• [PATCH v4 2/3] armv8: lx2162a: Add Soc changes to support LX2162A   Meenakshi Aggarwal
• [PATCH 1/3] rockchip: efuse: add support for RK3288 non-secure efuse   Kever Yang
• [PATCH] video: rockchip: Add missing dpcd_write() call to link_train_ce()   Kever Yang
• [PATCH] ram: rockchip: px30: add a config-based ddr selection   Philipp Tomsich
• [PATCH] km/arm: coding style clean up   Holger Brunck
• [u-boot PATCH] configs: am65/j72x: Set CONFIG_LOGLEVEL to 7   Roger Quadros
• [PATCH] fs/squashfs: Fix index off by 1 for inode SQFS_LDIR_TYPE   Gerard Koskamp
• [PATCH] dm: core: Add of_match_node helper function   Biju Das
• [PATCH] dm: soc: Add SoC id for attribute matching   Biju Das
• [PATCH] dm: soc: Add SoC id for attribute matching   Dave Gerlach
• [PATCH 0/3] mmc support for QEMU   Bin Meng
• [PATCH v1] verdinx-imx8mm: enable fdt overlays and env importing   Igor Opaniuk
• [PATCH 0/3] mmc support for QEMU   Harm Berntsen
• [PATCH] dm: soc: Add SoC id for attribute matching   Biju Das
• [RESEND PATCH v1] verdin-imx8mm: enable fdt overlays and env importing   Igor Opaniuk
• [PATCH] configs: meson64_android: don't show logo on ROM USB boot   Mattijs Korpershoek
• [PATCH 1/4] rockchip: Enable Console MUX in ROCKPi N10   Kever Yang
• [PATCH 2/4] arm64: dts: rockchip: Add chosen node for ROCK-Pi N8   Kever Yang
• [PATCH 3/4] video: rockchip: Support 4K resolution for rk3288, HDMI   Kever Yang
• [PATCH 4/4] rockchip: Enable Console MUX in ROCKPi N8   Kever Yang
• [PATCH] rockchip: mkimage: Remove host endianness dependency   Kever Yang
• [PATCH] km/arm: coding style clean up   Stefan Roese
• [PATCH v1] verdinx-imx8mm: enable fdt overlays and env importing   Oleksandr Suvorov
• [patch v2 01/10] drivers/video/rockchip/rk_vop.c: Use endpoint compatible string to find VOP mode   Kever Yang
• [RESEND PATCH v1] verdin-imx8mm: enable fdt overlays and env importing   Oleksandr Suvorov
• [PATCH v1] verdinx-imx8mm: enable fdt overlays and env importing   Oleksandr Suvorov
• [PATCH v1 5/7] apalis-imx8: add implementation for board_mem_get_layout   Oleksandr Suvorov
• [PATCH] configs: meson64_android: don't show logo on ROM USB boot   Neil Armstrong
• [PATCH v4 4/8] board: engicam: Attach i.MX6 common code   Kever Yang
• [PATCH v4 5/8] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit   Kever Yang
• [PATCH v4 6/8] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0   Kever Yang
• [PATCH v4 7/8] rockchip: Add Engicam PX30.Core C.TOUCH 2.0   Kever Yang
• [PATCH v4 8/8] doc: rockchip: Document Rockchip miniloader flashing   Kever Yang
• [PATCH 1/1] env: typo enougth   Joe Hershberger
• [PATCH] cros_ec: Support keyboard scanning with EC_CMD_GET_NEXT_EVENT   Alper Nebi Yasak
• [PATCH] test: unit test for efi_create_indexed_name()   Heinrich Schuchardt
• [PATCH] test: unit test for efi_create_indexed_name()   Heinrich Schuchardt
• [PATCH] fs/squashfs: Fix index off by 1 for inode SQFS_LDIR_TYPE   João Marcos Costa
• [PATCH] log: typo logl_pref in documentation   Heinrich Schuchardt
• [PATCH 00/33] stm32: enable logging features   Simon Glass
• [PATCH] Makefile: Correctly propagate failure when removing target   Simon Glass
• [PATCH 16/25] binman: Avoid reporting image-pos with compression   Simon Glass
• [PATCH 08/18] serial: add uart driver for MediaTek MT7620 SoC   Simon Glass
• [patch v2 01/10] drivers/video/rockchip/rk_vop.c: Use endpoint compatible string to find VOP mode   Arnaud Patard (Rtp)
• [GIT PULL] xilinx patches for v2021.01-v2   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v4 1/3] env: split env_import_redund() into 2 functions   Tom Rini
• [PATCH v4 2/3] env: Access Environment in SPI flashes before relocation   Tom Rini
• [PATCH v4 3/3] imx6: enable early spi environment access on aristainetos boards   Tom Rini
• [PATCH v4 01/22] log: Fix missing negation of ENOMEM   Tom Rini
• [PATCH v4 02/22] log: Fix incorrect documentation of log_filter.cat_list   Tom Rini
• [PATCH v4 03/22] log: Add additional const qualifier to arrays   Tom Rini
• [PATCH v4 04/22] log: Use CONFIG_IS_ENABLED() for LOG_TEST   Tom Rini
• [PATCH v4 05/22] log: Expose some helper functions   Tom Rini
• [PATCH v4 06/22] log: Add function to create a filter with flags   Tom Rini
• [PATCH v4 07/22] log: Add filter flag to deny on match   Tom Rini
• [PATCH v4 08/22] test: log: Convert log_test from python to C   Tom Rini
• [PATCH v4 09/22] test: log: Give tests names instead of numbers   Tom Rini
• [PATCH v4 10/22] test: Add tests for LOGFF_DENY   Tom Rini
• [PATCH v4 11/22] log: Add filter flag to match greater than a log level   Tom Rini
• [PATCH v4 12/22] test: Add test for LOGFF_MIN   Tom Rini
• [PATCH v4 13/22] cmd: log: Use sub-commands for log   Tom Rini
• [PATCH v4 14/22] cmd: log: Split off log level parsing   Tom Rini
• [PATCH v4 15/22] cmd: log: Add commands to list categories and drivers   Tom Rini
• [PATCH v4 16/22] cmd: log: Make "log level" print all log levels   Tom Rini
• [PATCH v4 17/22] lib: Add getopt   Tom Rini
• [PATCH v4 18/22] test: Add a test for getopt   Tom Rini
• [PATCH v4 19/22] cmd: log: Add commands to manipulate filters   Tom Rini
• [PATCH v4 20/22] test: Add a test for log filter-*   Tom Rini
• [PATCH v4 21/22] doc: Add log kerneldocs to documentation   Tom Rini
• [PATCH v4 22/22] doc: Update logging documentation   Tom Rini
• [PATCH] log: typo logl_pref in documentation   Tom Rini
• [maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config   Pali Rohár
• Please pull u-boot-dm   Simon Glass
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH v4 2/3] env: Access Environment in SPI flashes before relocation   Michael Walle
• [PATCH v4 2/3] env: Access Environment in SPI flashes before relocation   Tom Rini
• [PATCH v4 2/3] env: Access Environment in SPI flashes before relocation   Michael Walle
• [PATCH 0/4] fs: btrfs: coverity fixes   Qu Wenruo
• [PATCH 1/4] fs: btrfs: inode: handle uninitialized type before returning it   Qu Wenruo
• [PATCH 2/4] fs: btrfs: volumes: prevent overflow for multiplying   Qu Wenruo
• [PATCH 3/4] fs: btrfs: initialize @ret to 0 to prevent uninitialized return value   Qu Wenruo
• [PATCH 4/4] fs: btrfs: initialize @ii in show_dir() to make coverity happy   Qu Wenruo
• Pull request: u-boot-rockchip-20201031   Kever Yang
• Please pull u-boot-dm   Tom Rini
• [PATCH 0/4] common: Drop remaining includes in common.h (part A)   Simon Glass
• [PATCH 1/4] common: Drop asm/global_data.h from common header   Simon Glass
• [PATCH 2/4] common: Drop display_options.h from common header   Simon Glass
• [PATCH 3/4] common: Drop linux/printk.h from common header   Simon Glass
• [PATCH 4/4] Fix code style for time functions   Simon Glass
• CONFIG_SPL_UNIT_TEST   Heinrich Schuchardt
• test/Kconfig   Heinrich Schuchardt
• [PATCH 1/1] test: test/bloblist.c depends on asm/state.h   Heinrich Schuchardt
• [PATCH 1/1] test: linking test/compression.c fails   Heinrich Schuchardt
• U-Boot i2c bus num 1 is broken on Nokia N900   Ivaylo Dimitrov
• Pull request: u-boot-rockchip-20201031   Tom Rini
• [PATCH 1/2] mtd: spi-nor: Correct spi-nor-ids.c license to GPL-2.0   Alper Nebi Yasak
• [PATCH 2/2] mtd: spi-nor-ids: Add Gigadevice GD25LQ64C   Alper Nebi Yasak
• [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Pali Rohár
• [PATCH 1/6] Nokia RX-51: Remove old comments from configs/nokia_rx51.h file   Pali Rohár
• [PATCH 2/6] Nokia RX-51: Fix crashing in U-Boot mmc function omap_hsmmc_stop_clock()   Pali Rohár
• [PATCH 3/6] Nokia RX-51: During init disable lp5523 led instead of resetting it   Pali Rohár
• [PATCH 4/6] Nokia RX-51: Update test script   Pali Rohár
• [PATCH 5/6] Nokia RX-51: Make onenand working   Pali Rohár
• [PATCH 6/6] mtd: OneNAND: Set MTD type   Pali Rohár