[PATCH v2] net: e1000: add defaults for i210 TX/RX PBSIZE

[Christian Gmeiner]

Set the defaults on probe for the packet buffer size registers
for the i210.

The TX/RX PBSIZE register of the i210 resets to its default value
only at power-on - see Intel Ethernet Controller I210 Datasheet rev 3.5
chapter 8.3 'Internal Packet Buffer Size Registers'.

If something (another driver, another OS, etc.) modifies this register
from its default value, the e1000 driver doesn't function correctly. It
detects a hang of the transmitter and continuously resets the adapter.
Here we set this value to its default when resetting the i210 to
resolve this issue.

Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
---
  v1 -> v2: fix compiler errors

  https://travis-ci.org/github/austriancoder/u-boot/builds/732232965
---
 drivers/net/e1000.c | 5 +++++
 drivers/net/e1000.h | 6 ++++++
 2 files changed, 11 insertions(+)

diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 49be766702..8e6c755f64 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -1644,6 +1644,11 @@ e1000_reset_hw(struct e1000_hw *hw)
 	E1000_WRITE_REG(hw, TCTL, E1000_TCTL_PSP);
 	E1000_WRITE_FLUSH(hw);
 
+	if (hw->mac_type == e1000_igb) {
+		E1000_WRITE_REG(hw, RXPBS, I210_RXPBSIZE_DEFAULT);
+		E1000_WRITE_REG(hw, TXPBS, I210_TXPBSIZE_DEFAULT);
+	}
+
 	/* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
 	hw->tbi_compatibility_on = false;
 
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index 19ed4777d9..072851ba31 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -735,6 +735,7 @@ struct e1000_ffvt_entry {
 #define E1000_ERT      0x02008  /* Early Rx Threshold - RW */
 #define E1000_FCRTL    0x02160	/* Flow Control Receive Threshold Low - RW */
 #define E1000_FCRTH    0x02168	/* Flow Control Receive Threshold High - RW */
+#define E1000_RXPBS    0x02404  /* Rx Packet Buffer Size - RW */
 #define E1000_RDBAL    0x02800	/* RX Descriptor Base Address Low - RW */
 #define E1000_RDBAH    0x02804	/* RX Descriptor Base Address High - RW */
 #define E1000_RDLEN    0x02808	/* RX Descriptor Length - RW */
@@ -745,6 +746,7 @@ struct e1000_ffvt_entry {
 #define E1000_RADV     0x0282C	/* RX Interrupt Absolute Delay Timer - RW */
 #define E1000_RSRPD    0x02C00	/* RX Small Packet Detect - RW */
 #define E1000_TXDMAC   0x03000	/* TX DMA Control - RW */
+#define E1000_TXPBS	   0x03404  /* Tx Packet Buffer Size - RW */
 #define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
 #define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
 #define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
@@ -2589,4 +2591,8 @@ struct e1000_hw {
 
 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000 /* Clear Interrupt timers
 							after IMS clear */
+
+#define I210_RXPBSIZE_DEFAULT          0x000000A2 /* RXPBSIZE default */
+#define I210_TXPBSIZE_DEFAULT          0x04000014 /* TXPBSIZE default */
+
 #endif	/* _E1000_HW_H_ */
-- 
2.28.0