[PATCH v2 2/5] arm: dts: armada-cp110-master: update nand-controller

[Stefan Roese]

On 18.10.20 14:56, Baruch Siach wrote:
> Align node properties to kernel dts node.
> 
> The change of compatible property does not affect any currently
> supported board.
> 
> Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
> with the current driver.
> 
> Signed-off-by: Baruch Siach <baruch at tkos.co.il>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   arch/arm/dts/armada-cp110-master.dtsi | 15 +++++++++------
>   1 file changed, 9 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi
> index cd5c974482e6..7d0d31da306d 100644
> --- a/arch/arm/dts/armada-cp110-master.dtsi
> +++ b/arch/arm/dts/armada-cp110-master.dtsi
> @@ -285,15 +285,18 @@
>   			};
>   
>   			cpm_nand: nand at 720000 {
> -				compatible = "marvell,mvebu-pxa3xx-nand";
> -				reg = <0x720000 0x100>;
> +				compatible = "marvell,armada-8k-nand-controller",
> +					"marvell,armada370-nand-controller";
> +				reg = <0x720000 0x54>;
>   				#address-cells = <1>;
> -
> -				clocks = <&cpm_syscon0 1 2>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core", "reg";
> +				clocks = <&cpm_syscon0 1 2>,
> +					 <&cpm_syscon0 1 17>;
> +				marvell,system-controller = <&cpm_syscon0>;
>   				nand-enable-arbiter;
>   				num-cs = <1>;
> -				nand-ecc-strength = <4>;
> -				nand-ecc-step-size = <512>;
>   				status = "disabled";
>   			};
>   
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de