[PATCH v3] i2c: rcar_i2c: Fix i2c read/write errors

[Heiko Schocher]

Hello Lad,

Am 30.09.2020 um 14:24 schrieb Lad Prabhakar:
> commit 7c8f821e ("i2c: rcar_i2c: Set the slave address from
> rcar_i2c_xfer") blindly called rcar_i2c_set_addr() with read argument
> always set to 1 during xfer which introduced read/write errors, whereas
> earlier rcar_i2c_read_common() called rcar_i2c_set_addr() with read set to
> 1 and rcar_i2c_write_common() called rcar_i2c_set_addr() with read set 0.
> 
> Fixes: 7c8f821e ("i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer")
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> ---
> v2->v3
> * Made sure value of read is ether 0/1 as pointed by Marek
> 
> v1->v2
> * Incorporated suggestion from Heiko
> 
> v1:
>   https://patchwork.ozlabs.org/project/uboot/patch/
>   20200921163353.5540-1-prabhakar.mahadev-lad.rj at bp.renesas.com/
> 
> Without this patch below errors are seen:
>   => i2c probe
> Valid chip addresses: 34 47 68
> => i2c md 0x47 0 100
> Error reading the chip: -110
> => i2c mw 0x47 0x0a 0x06
> Error writing the chip: -110
> =>
> ---
>   drivers/i2c/rcar_i2c.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-i2c master after fixing the commit id length
to 12 digits.

@Tom: I started travis build and if all build fine I think, this
patch should go into 2020.10 (Late I know....) is this okay for you?

bye,
Heiko
> 
> diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c
> index 4267bbfa5a..663c342cd8 100644
> --- a/drivers/i2c/rcar_i2c.c
> +++ b/drivers/i2c/rcar_i2c.c
> @@ -211,7 +211,7 @@ static int rcar_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
>   	int ret;
>   
>   	for (; nmsgs > 0; nmsgs--, msg++) {
> -		ret = rcar_i2c_set_addr(dev, msg->addr, 1);
> +		ret = rcar_i2c_set_addr(dev, msg->addr, !!(msg->flags & I2C_M_RD));
>   		if (ret)
>   			return ret;
>   
> 

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de