[PATCH v3 1/8] Revert "mmc: zynq: parse dt when probing"

[Michal Simek]

From: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>

This reverts commit 942b5fc03218d1c94468fc658e7dec65dabcc830.

This is partial revert of the above commit.

mmc_of_parse() is reading no-1-8-v from device tree and if set,
it is clearing the UHS speed capabilities of cfg->host_caps.
cfg->host_caps &= ~(UHS_CAPS | MMC_MODE_HS200 |
		    MMC_MODE_HS400 | MMC_MODE_HS400_ES);

This is still missing to clear UHS speeds like SDHCI_SUPPORT_SDR104,
SDHCI_SUPPORT_SDR50 and SDHCI_SUPPORT_DDR50.

Even if we clear the flags SDHCI_SUPPORT_XXX in mmc_of_parse(),
these speed flags are getting set again in cfg->host_caps in
sdhci_setup_cfg().

The reason for this is, SDHCI_SUPPORT_XXX flags are cleared
only if controller is not capable of supporting MMC_VDD_165_195 volts.

if (caps & SDHCI_CAN_VDD_180)
	cfg->voltages |= MMC_VDD_165_195;

if (!(cfg->voltages & MMC_VDD_165_195))
	caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
		    SDHCI_SUPPORT_DDR50);

It means "no-1-8-v", which is read from DT is not coming in to effect.
So it is better we keep the host quirks(SDHCI_QUIRK_NO_1_8_V) to
clear UHS speeds based on no-1-8-v from device tree.

Hence revert the functionality related to no-1-8-v only, rest is fine
in the patch.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---

(no changes since v1)

 drivers/mmc/sdhci.c      | 3 ++-
 drivers/mmc/zynq_sdhci.c | 5 +++++
 include/sdhci.h          | 1 +
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index d549a264d73b..06289343124e 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -812,7 +812,8 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 		cfg->host_caps &= ~MMC_MODE_HS_52MHz;
 	}
 
-	if (!(cfg->voltages & MMC_VDD_165_195))
+	if (!(cfg->voltages & MMC_VDD_165_195) ||
+	    (host->quirks & SDHCI_QUIRK_NO_1_8_V))
 		caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
 			    SDHCI_SUPPORT_DDR50);
 
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 775c17baac5b..88e478ee11c1 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -28,6 +28,7 @@ struct arasan_sdhci_priv {
 	struct sdhci_host *host;
 	u8 deviceid;
 	u8 bank;
+	u8 no_1p8;
 };
 
 #if defined(CONFIG_ARCH_ZYNQMP)
@@ -236,6 +237,9 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
 #endif
 
+	if (priv->no_1p8)
+		host->quirks |= SDHCI_QUIRK_NO_1_8_V;
+
 	plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ;
 
 	ret = mmc_of_parse(dev, &plat->cfg);
@@ -277,6 +281,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 
 	priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
 	priv->bank = dev_read_u32_default(dev, "xlnx,mio-bank", 0);
+	priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
 
 	return 0;
 }
diff --git a/include/sdhci.h b/include/sdhci.h
index f69d5f81fb1b..1fd20ec0860b 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -244,6 +244,7 @@
 #define SDHCI_QUIRK_BROKEN_HISPD_MODE	BIT(5)
 #define SDHCI_QUIRK_WAIT_SEND_CMD	(1 << 6)
 #define SDHCI_QUIRK_USE_WIDE8		(1 << 8)
+#define SDHCI_QUIRK_NO_1_8_V		(1 << 9)
 
 /* to make gcc happy */
 struct sdhci_host;
-- 
2.28.0