[PATCH v2 22/22] doc: Update logging documentation

Sean Anderson seanga2 at gmail.com
Sat Oct 10 21:43:47 CEST 2020


This updates logging documentation with some examples of the new commands
added in the previous commits. It also removes some items from the to-do
list which have been implemented.

Signed-off-by: Sean Anderson <seanga2 at gmail.com>
---

Changes in v2:
- Clarify wording of filter documentation
- Include enum definitions instead of re-documenting them
- Reorganize log documentation; related sections should now be more proximate

 doc/develop/logging.rst | 233 ++++++++++++++++++++--------------------
 1 file changed, 114 insertions(+), 119 deletions(-)

diff --git a/doc/develop/logging.rst b/doc/develop/logging.rst
index 6a22062073..e2ac643c36 100644
--- a/doc/develop/logging.rst
+++ b/doc/develop/logging.rst
@@ -21,23 +21,13 @@ is visible from the basic console output.
 U-Boot's logging feature aims to satisfy this goal for both users and
 developers.
 
-
 Logging levels
 --------------
 
-There are a number logging levels available, in increasing order of verbosity:
-
-* LOGL_EMERG - Printed before U-Boot halts
-* LOGL_ALERT - Indicates action must be taken immediate or U-Boot will crash
-* LOGL_CRIT - Indicates a critical error that will cause boot failure
-* LOGL_ERR - Indicates an error that may cause boot failure
-* LOGL_WARNING - Warning about an unexpected condition
-* LOGL_NOTE - Important information about progress
-* LOGL_INFO - Information about normal boot progress
-* LOGL_DEBUG - Debug information (useful for debugging a driver or subsystem)
-* LOGL_DEBUG_CONTENT - Debug message showing full message content
-* LOGL_DEBUG_IO - Debug message showing hardware I/O access
+There are a number logging levels available.
 
+.. kernel-doc:: include/log.h
+   :identifiers: log_level_t
 
 Logging category
 ----------------
@@ -46,16 +36,8 @@ Logging can come from a wide variety of places within U-Boot. Each log message
 has a category which is intended to allow messages to be filtered according to
 their source.
 
-The following main categories are defined:
-
-* LOGC_NONE - Unknown category (e.g. a debug() statement)
-* UCLASS\_... - Related to a particular uclass (e.g. UCLASS_USB)
-* LOGC_ARCH - Related to architecture-specific code
-* LOGC_BOARD - Related to board-specific code
-* LOGC_CORE - Related to core driver-model support
-* LOGC_DT - Related to device tree control
-* LOGC_EFI - Related to EFI implementation
-
+.. kernel-doc:: include/log.h
+   :identifiers: log_category_t
 
 Enabling logging
 ----------------
@@ -72,7 +54,6 @@ If CONFIG_LOG is not set, then no logging will be available.
 The above have SPL and TPL versions also, e.g. CONFIG_SPL_LOG_MAX_LEVEL and
 CONFIG_TPL_LOG_MAX_LEVEL.
 
-
 Temporary logging within a single file
 --------------------------------------
 
@@ -86,46 +67,8 @@ to enable building in of all logging statements in a single file. Put it at
 the top of the file, before any #includes.
 
 To actually get U-Boot to output this you need to also set the default logging
-level - e.g. set CONFIG_LOG_DEFAULT_LEVEL to 7 (LOGL_DEBUG) or more. Otherwise
-debug output is suppressed and will not be generated.
-
-
-Convenience functions
----------------------
-
-A number of convenience functions are available to shorten the code needed
-for logging:
-
-* log_err(_fmt...)
-* log_warning(_fmt...)
-* log_notice(_fmt...)
-* log_info(_fmt...)
-* log_debug(_fmt...)
-* log_content(_fmt...)
-* log_io(_fmt...)
-
-With these the log level is implicit in the name. The category is set by
-LOG_CATEGORY, which you can only define once per file, above all #includes, e.g.
-
-.. code-block:: c
-
-	#define LOG_CATEGORY LOGC_ALLOC
-
-Remember that all uclasses IDs are log categories too.
-
-
-Log command
------------
-
-The 'log' command provides access to several features:
-
-* level - access the default log level
-* format - access the console log format
-* rec - output a log record
-* test - run tests
-
-Type 'help log' for details.
-
+level - e.g. set CONFIG_LOG_DEFAULT_LEVEL to 7 (:c:type:`LOGL_DEBUG`) or more.
+Otherwise debug output is suppressed and will not be generated.
 
 Using DEBUG
 -----------
@@ -142,51 +85,6 @@ at the top of a file, then it takes precedence. This means that debug()
 statements will result in output to the console and this output will not be
 logged.
 
-
-Logging destinations
---------------------
-
-If logging information goes nowhere then it serves no purpose. U-Boot provides
-several possible determinations for logging information, all of which can be
-enabled or disabled independently:
-
-* console - goes to stdout
-* syslog - broadcast RFC 3164 messages to syslog servers on UDP port 514
-
-The syslog driver sends the value of environmental variable 'log_hostname' as
-HOSTNAME if available.
-
-
-Log format
-----------
-
-You can control the log format using the 'log format' command. The basic
-format is::
-
-   LEVEL.category,file.c:123-func() message
-
-In the above, file.c:123 is the filename where the log record was generated and
-func() is the function name. By default ('log format default') only the
-function name and message are displayed on the console. You can control which
-fields are present, but not the field order.
-
-
-Filters
--------
-
-Filters are attached to log drivers to control what those drivers emit. Only
-records that pass through the filter make it to the driver.
-
-Filters can be based on several criteria:
-
-* maximum log level
-* in a set of categories
-* in a set of files
-
-If no filters are attached to a driver then a default filter is used, which
-limits output to records with a level less than CONFIG_MAX_LOG_LEVEL.
-
-
 Logging statements
 ------------------
 
@@ -210,6 +108,113 @@ can be used whenever your function returns an error value:
 This will write a log record when an error code is detected (a value < 0). This
 can make it easier to trace errors that are generated deep in the call stack.
 
+Convenience functions
+~~~~~~~~~~~~~~~~~~~~~
+
+A number of convenience functions are available to shorten the code needed
+for logging:
+
+* log_err(_fmt...)
+* log_warning(_fmt...)
+* log_notice(_fmt...)
+* log_info(_fmt...)
+* log_debug(_fmt...)
+* log_content(_fmt...)
+* log_io(_fmt...)
+
+With these the log level is implicit in the name. The category is set by
+LOG_CATEGORY, which you can only define once per file, above all #includes, e.g.
+
+.. code-block:: c
+
+	#define LOG_CATEGORY LOGC_ALLOC
+
+Remember that all uclasses IDs are log categories too.
+
+Logging destinations
+--------------------
+
+If logging information goes nowhere then it serves no purpose. U-Boot provides
+several possible determinations for logging information, all of which can be
+enabled or disabled independently:
+
+* console - goes to stdout
+* syslog - broadcast RFC 3164 messages to syslog servers on UDP port 514
+
+The syslog driver sends the value of environmental variable 'log_hostname' as
+HOSTNAME if available.
+
+Filters
+~~~~~~~
+
+Filters are attached to log drivers to control what those drivers emit. FIlters
+can either allow or deny a log message when they match it. Only records which
+are allowed by a filter make it to the driver.
+
+Filters can be based on several criteria:
+
+* minimum or maximum log level
+* in a set of categories
+* in a set of files
+
+If no filters are attached to a driver then a default filter is used, which
+limits output to records with a level less than CONFIG_MAX_LOG_LEVEL.
+
+Log command
+-----------
+
+The 'log' command provides access to several features:
+
+* level - get/set the log level
+* categories - list log categories
+* drivers - list log drivers
+* filter-list - list filters
+* filter-add - add a new filter
+* filter-remove - remove filters
+* format - access the console log format
+* rec - output a log record
+* test - run tests
+
+Type 'help log' for details.
+
+Log format
+~~~~~~~~~~
+
+You can control the log format using the 'log format' command. The basic
+format is::
+
+   LEVEL.category,file.c:123-func() message
+
+In the above, file.c:123 is the filename where the log record was generated and
+func() is the function name. By default ('log format default') only the message
+is displayed on the console. You can control which fields are present, but not
+the field order.
+
+Adding Filters
+~~~~~~~~~~~~~~
+
+To add new filters at runtime, use the 'log filter-add' command. For example, to
+suppress messages from the SPI subsystem, run::
+
+    log filter-add -D -c spi
+
+You will also need to add another filter to allow other messages (because the
+default filter no longer applies)::
+
+    log filter-add -A -l debug
+
+To view active filters, use the 'log filter-list' command. Some example output
+is::
+
+    => log filter-list
+    num policy level           categories files
+      0   deny <=IO                   spi
+      1  allow <=DEBUG
+
+Note that filters are processed in-order from top to bottom, not in the order of
+their filter number. Filters are added to the top of the list if they deny when
+they match, and to the bottom if they allow when they match. For more
+information, consult the usage of the 'log' command, by running 'help log'.
 
 Code size
 ---------
@@ -226,7 +231,6 @@ The last option turns every debug() statement into a logging call, which
 bloats the code hugely. The advantage is that it is then possible to enable
 all logging within U-Boot.
 
-
 To Do
 -----
 
@@ -259,8 +263,6 @@ Add a way to browse log records
 
 Add a way to record log records for browsing using an external tool
 
-Add commands to add and remove filters
-
 Add commands to add and remove log devices
 
 Allow sharing of printf format strings in log records to reduce storage size
@@ -268,10 +270,6 @@ for large numbers of log records
 
 Add a command-line option to sandbox to set the default logging level
 
-Convert core driver model code to use logging
-
-Convert uclasses to use logging with the correct category
-
 Consider making log() calls emit an automatic newline, perhaps with a logn()
 function to avoid that
 
@@ -282,9 +280,6 @@ number dropped due to them being generated before the log system was ready.
 
 Add a printf() format string pragma so that log statements are checked properly
 
-Enhance the log console driver to show level / category / file / line
-information
-
 Add a command to add new log records and delete existing records.
 
 Provide additional log() functions - e.g. logc() to specify the category
-- 
2.28.0



More information about the U-Boot mailing list