[PATCH v2 0/2] Add OpenCores I2C controller driver
Pragnesh Patel
pragnesh.patel at sifive.com
Thu Oct 22 08:54:44 CEST 2020
This driver has been tested on HiFive Unleashed with a PMOD based
RTCC sensor connected to I2C pins J1 header of the board.
This series is available here [1] for testing
[1] https://github.com/pragnesh26992/u-boot/tree/i2c
Tested-by: Sagar Shrikant Kadam <sagar.kadam at sifive.com>
Changes in v2:
- Remove TYPE_SIFIVE_REV0 flag
- Update the Opencores I2C Controller Link
U-Boot Logs for reference:
Hit any key to stop autoboot: 0
=> i2c dev 0
Setting bus to 0
=> i2c probe
Valid chip addresses: 57 6F
=> i2c md 0x57 0x0 1
0000: a5 .
=> i2c mw 0x57 0x0 0x5a 1
=> i2c md 0x57 0x0 1
0000: 5a Z
=> i2c md 0x57 0x2 1
0002: 99 .
=> i2c mw 0x57 0x2 0xa9 1
=> i2c md 0x57 0x2 1
0002: a9 .
=> i2c md 0x6f 0x20 1
0020: 5a Z
=> i2c md 0x6f 0x5f 1
005f: a5 .
=> i2c mw 0x6f 0x20 0xa9 1
=> i2c mw 0x6f 0x5f 0xa9 1
=> i2c md 0x6f 0x20 1
0020: a9 .
=> i2c md 0x6f 0x5f 1
005f: a9 .
=>
Pragnesh Patel (2):
i2c: ocores: add i2c driver for OpenCores I2C controller
riscv: sifive/fu540: kconfig: Enable support for Opencores I2C
controller
arch/riscv/cpu/fu540/Kconfig | 2 +
board/sifive/fu540/Kconfig | 1 +
drivers/i2c/Kconfig | 7 +
drivers/i2c/Makefile | 1 +
drivers/i2c/ocores_i2c.c | 636 +++++++++++++++++++++++++++++++++++
5 files changed, 647 insertions(+)
create mode 100644 drivers/i2c/ocores_i2c.c
--
2.17.1
More information about the U-Boot
mailing list