[PATCH 04/10] xilinx: Enable FRU command for all ARM based platforms

[Michal Simek]

Enable it by default for board detection.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 configs/xilinx_versal_virt_defconfig | 1 +
 configs/xilinx_zynq_virt_defconfig   | 1 +
 configs/xilinx_zynqmp_virt_defconfig | 1 +
 3 files changed, 3 insertions(+)

diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index b6ca566ed8cd..34ff8ddde0c1 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_VERSAL=y
 CONFIG_SYS_TEXT_BASE=0x8000000
 CONFIG_SYS_MALLOC_F_LEN=0x100000
 CONFIG_DM_GPIO=y
+CONFIG_CMD_FRU=y
 CONFIG_DEFINE_TCM_OCM_MMAP=y
 CONFIG_COUNTER_FREQUENCY=100000000
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index df3da763c500..439a4fe6e539 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -6,6 +6,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
+CONFIG_CMD_FRU=y
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 01b2f18a057a..8937658a25d5 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -9,6 +9,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_ZYNQ_MAC_IN_EEPROM=y
 CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
+CONFIG_CMD_FRU=y
 CONFIG_ZYNQMP_USB=y
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
 CONFIG_AHCI=y
-- 
2.28.0