[PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings

[Stefan Roese]

On 02.10.20 07:51, Andre Heider wrote:
> Fix the actual board vendor and ease synching dts files from Linux.
> 
> Signed-off-by: Andre Heider <a.heider at gmail.com>
> ---
> v3: rebase on master

Applied to u-boot-marvell/master

Thanks,
Stefan

>   arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
>   board/Marvell/mvebu_armada-37xx/board.c  | 8 ++++----
>   2 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
> index 4534f5ff29..be67a45870 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -50,8 +50,8 @@
>   #include "armada-372x.dtsi"
>   
>   / {
> -	model = "Marvell Armada 3720 Community Board ESPRESSOBin";
> -	compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
> +	model = "Globalscale Marvell ESPRESSOBin Board";
> +	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
>   
>   	chosen {
>   		stdout-path = "serial0:115200n8";
> diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
> index 2bfc7171c4..73d69e0388 100644
> --- a/board/Marvell/mvebu_armada-37xx/board.c
> +++ b/board/Marvell/mvebu_armada-37xx/board.c
> @@ -88,14 +88,14 @@ int board_late_init(void)
>   	if (env_get("fdtfile"))
>   		return 0;
>   
> -	if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> +	if (!of_machine_is_compatible("globalscale,espressobin"))
>   		return 0;
>   
>   	/* If the memory controller has been configured for DDR4, we're running on v7 */
>   	ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
>   		& A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
>   
> -	emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
> +	emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
>   
>   	if (ddr4 && emmc)
>   		env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb");
> @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
>   /* Bring-up board-specific network stuff */
>   int board_network_enable(struct mii_dev *bus)
>   {
> -	if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> +	if (!of_machine_is_compatible("globalscale,espressobin"))
>   		return 0;
>   
>   	/*
> @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
>   	int part_off;
>   
>   	/* Fill SPI MTD partitions for Linux kernel on Espressobin */
> -	if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> +	if (!of_machine_is_compatible("globalscale,espressobin"))
>   		return 0;
>   
>   	spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de