[PATCH 1/3] phy: marvell: cp110: let the firmware configure the comphy

Baruch Siach baruch at tkos.co.il
Sun Oct 18 16:11:11 CEST 2020


From: Grzegorz Jaszczyk <jaz at semihalf.com>

Replace all comphy initialization with appropriate smc calls. It will
result with triggering synchronous exception that is handled by Secure
Monitor code in EL3. Then the Secure Monitor code will dispatch each smc
call (by parsing the smc function identifier) and triggers appropriate
comphy initialization.

This patch reworks serdes handling for: SATA, SGMII, HS-SGMII and SFI
interfaces.

Signed-off-by: Grzegorz Jaszczyk <jaz at semihalf.com>
Reviewed-by: Igal Liberman <igall at marvell.com>
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
 drivers/phy/marvell/comphy_cp110.c | 816 ++++-------------------------
 1 file changed, 89 insertions(+), 727 deletions(-)

diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 15e80049def6..31baa0bb3700 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -7,6 +7,7 @@
 #include <fdtdec.h>
 #include <log.h>
 #include <asm/io.h>
+#include <asm/ptrace.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 #include <linux/delay.h>
@@ -22,6 +23,32 @@ DECLARE_GLOBAL_DATA_PTR;
 #define HPIPE_ADDR(base, lane)			(SD_ADDR(base, lane) + 0x800)
 #define COMPHY_ADDR(base, lane)			(base + 0x28 * lane)
 
+/* Firmware related definitions used for SMC calls */
+#define MV_SIP_COMPHY_POWER_ON	0x82000001
+#define MV_SIP_COMPHY_POWER_OFF	0x82000002
+#define MV_SIP_COMPHY_PLL_LOCK	0x82000003
+
+#define COMPHY_FW_MODE_FORMAT(mode)		((mode) << 12)
+#define COMPHY_FW_FORMAT(mode, idx, speeds)	\
+			(((mode) << 12) | ((idx) << 8) | ((speeds) << 2))
+#define COMPHY_SATA_MODE	0x1
+#define COMPHY_SGMII_MODE	0x2	/* SGMII 1G */
+#define COMPHY_HS_SGMII_MODE	0x3	/* SGMII 2.5G */
+#define COMPHY_USB3H_MODE	0x4
+#define COMPHY_USB3D_MODE	0x5
+#define COMPHY_PCIE_MODE	0x6
+#define COMPHY_RXAUI_MODE	0x7
+#define COMPHY_XFI_MODE		0x8
+#define COMPHY_SFI_MODE		0x9
+#define COMPHY_USB3_MODE	0xa
+#define COMPHY_AP_MODE		0xb
+
+/* Comphy unit index macro */
+#define COMPHY_UNIT_ID0		0
+#define COMPHY_UNIT_ID1		1
+#define COMPHY_UNIT_ID2		2
+#define COMPHY_UNIT_ID3		3
+
 struct utmi_phy_data {
 	void __iomem *utmi_base_addr;
 	void __iomem *usb_cfg_addr;
@@ -642,15 +669,31 @@ static int comphy_usb3_power_up(u32 lane, void __iomem *hpipe_base,
 	return ret;
 }
 
+static int comphy_smc(u32 function_id, void __iomem *comphy_base_addr,
+		      u32 lane, u32 mode)
+{
+	struct pt_regs pregs = {0};
+
+	pregs.regs[0] = function_id;
+	pregs.regs[1] = (unsigned long)comphy_base_addr;
+	pregs.regs[2] = lane;
+	pregs.regs[3] = mode;
+
+	smc_call(&pregs);
+
+	/*
+	 * TODO: Firmware return 0 on success, temporary map it to u-boot
+	 * convention, but after all comphy will be reworked the convention in
+	 * u-boot should be change and this conversion removed
+	 */
+	return pregs.regs[0] ? 0 : 1;
+}
+
 static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base,
-				void __iomem *comphy_base, int cp_index,
-				u32 invert)
+				void __iomem *comphy_base_addr, int cp_index,
+				u32 type)
 {
 	u32 mask, data, i, ret = 1;
-	void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
-	void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane);
-	void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
-	void __iomem *addr;
 	void __iomem *sata_base = NULL;
 	int sata_node = -1; /* Set to -1 in order to read the first sata node */
 
@@ -703,255 +746,8 @@ static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base,
 	data |= 0x0 << SATA3_CTRL_SATA_SSU_OFFSET;
 	reg_set(sata_base + SATA3_VENDOR_DATA, data, mask);
 
-	debug("stage: RFU configurations - hard reset comphy\n");
-	/* RFU configurations - hard reset comphy */
-	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
-	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
-	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
-	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
-	mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
-	data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
-	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
-	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
-	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
-
-	/* Set select data  width 40Bit - SATA mode only */
-	reg_set(comphy_addr + COMMON_PHY_CFG6_REG,
-		0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET,
-		COMMON_PHY_CFG6_IF_40_SEL_MASK);
-
-	/* release from hard reset in SD external */
-	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-	/* Wait 1ms - until band gap and ref clock ready */
-	mdelay(1);
-
-	debug("stage: Comphy configuration\n");
-	/* Start comphy Configuration */
-	/* Set reference clock to comes from group 1 - choose 25Mhz */
-	reg_set(hpipe_addr + HPIPE_MISC_REG,
-		0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
-		HPIPE_MISC_REFCLK_SEL_MASK);
-	/* Reference frequency select set 1 (for SATA = 25Mhz) */
-	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
-	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
-	/* PHY mode select (set SATA = 0x0 */
-	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
-	data |= 0x0 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
-	/* Set max PHY generation setting - 6Gbps */
-	reg_set(hpipe_addr + HPIPE_INTERFACE_REG,
-		0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET,
-		HPIPE_INTERFACE_GEN_MAX_MASK);
-	/* Set select data  width 40Bit (SEL_BITS[2:0]) */
-	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
-		0x2 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK);
-
-	debug("stage: Analog paramters from ETP(HW)\n");
-	/* Set analog parameters from ETP(HW) */
-	/* G1 settings */
-	mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
-	data = 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
-	mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
-	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
-	mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
-	data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
-	mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
-	data |= 0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
-	mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
-	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
-
-	mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
-	data = 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
-	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
-	data |= 0x2 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
-	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
-	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
-	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK;
-	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET;
-	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK;
-	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
-
-	/* G2 settings */
-	mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
-	data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
-	mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK;
-	data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET;
-	mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
-	data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
-	mask |= HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK;
-	data |= 0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET;
-	mask |= HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK;
-	data |= 0x1 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
-
-	/* G3 settings */
-	mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
-	data = 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
-	mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
-	data |= 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
-	mask |= HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK;
-	data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET;
-	mask |= HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK;
-	data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET;
-	mask |= HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK;
-	data |= 0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET;
-	mask |= HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK;
-	data |= 0x2 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET;
-	mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK;
-	data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G3_SET_1_REG, data, mask);
-
-	/* DTL Control */
-	mask = HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK;
-	data = 0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET;
-	mask |= HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK;
-	data |= 0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET;
-	mask |= HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
-	data |= 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
-	mask |= HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK;
-	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET;
-	mask |= HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK;
-	data |= 0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET;
-	mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_MASK;
-	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET;
-	mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK;
-	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+	ret = comphy_smc(MV_SIP_COMPHY_POWER_ON, comphy_base_addr, lane, type);
 
-	/* Trigger sampler enable pulse (by toggleing the bit) */
-	mask = HPIPE_SMAPLER_MASK;
-	data = 0x1 << HPIPE_SMAPLER_OFFSET;
-	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
-	mask = HPIPE_SMAPLER_MASK;
-	data = 0x0 << HPIPE_SMAPLER_OFFSET;
-	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
-
-	/* VDD Calibration Control 3 */
-	mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
-	data = 0x10 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
-
-	/* DFE Resolution Control */
-	mask = HPIPE_DFE_RES_FORCE_MASK;
-	data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
-
-	/* DFE F3-F5 Coefficient Control */
-	mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
-	data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
-	mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
-	data = 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
-
-	/* G3 Setting 3 */
-	mask = HPIPE_G3_FFE_CAP_SEL_MASK;
-	data = 0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET;
-	mask |= HPIPE_G3_FFE_RES_SEL_MASK;
-	data |= 0x4 << HPIPE_G3_FFE_RES_SEL_OFFSET;
-	mask |= HPIPE_G3_FFE_SETTING_FORCE_MASK;
-	data |= 0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET;
-	mask |= HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
-	data |= 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
-	mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
-	data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
-
-	/* G3 Setting 4 */
-	mask = HPIPE_G3_DFE_RES_MASK;
-	data = 0x2 << HPIPE_G3_DFE_RES_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
-
-	/* Offset Phase Control */
-	mask = HPIPE_OS_PH_OFFSET_MASK;
-	data = 0x5c << HPIPE_OS_PH_OFFSET_OFFSET;
-	mask |= HPIPE_OS_PH_OFFSET_FORCE_MASK;
-	data |= 0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
-	mask = HPIPE_OS_PH_VALID_MASK;
-	data = 0x1 << HPIPE_OS_PH_VALID_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
-	mask = HPIPE_OS_PH_VALID_MASK;
-	data = 0x0 << HPIPE_OS_PH_VALID_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
-
-	/* Set G1 TX amplitude and TX post emphasis value */
-	mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
-	data = 0x8 << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
-	mask |= HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK;
-	data |= 0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET;
-	mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
-	data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
-	mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK;
-	data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
-
-	/* Set G2 TX amplitude and TX post emphasis value */
-	mask = HPIPE_G2_SET_0_G2_TX_AMP_MASK;
-	data = 0xa << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET;
-	mask |= HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK;
-	data |= 0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET;
-	mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_MASK;
-	data |= 0x2 << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET;
-	mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK;
-	data |= 0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G2_SET_0_REG, data, mask);
-
-	/* Set G3 TX amplitude and TX post emphasis value */
-	mask = HPIPE_G3_SET_0_G3_TX_AMP_MASK;
-	data = 0xe << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET;
-	mask |= HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK;
-	data |= 0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET;
-	mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_MASK;
-	data |= 0x6 << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET;
-	mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK;
-	data |= 0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET;
-	mask |= HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK;
-	data |= 0x4 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET;
-	mask |= HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK;
-	data |= 0x0 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G3_SET_0_REG, data, mask);
-
-	/* SERDES External Configuration 2 register */
-	mask = SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask);
-
-	/* DFE reset sequence */
-	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
-		0x1 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
-		HPIPE_PWR_CTR_RST_DFE_MASK);
-	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
-		0x0 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
-		HPIPE_PWR_CTR_RST_DFE_MASK);
-
-	/* Set RX / TX swaps */
-	data = mask = 0;
-	if (invert & PHY_POLARITY_TXD_INVERT) {
-		data |= (1 << HPIPE_SYNC_PATTERN_TXD_SWAP_OFFSET);
-		mask |= HPIPE_SYNC_PATTERN_TXD_SWAP_MASK;
-	}
-	if (invert & PHY_POLARITY_RXD_INVERT) {
-		data |= (1 << HPIPE_SYNC_PATTERN_RXD_SWAP_OFFSET);
-		mask |= HPIPE_SYNC_PATTERN_RXD_SWAP_MASK;
-	}
-	reg_set(hpipe_addr + HPIPE_SYNC_PATTERN_REG, data, mask);
-
-	/* SW reset for interupt logic */
-	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
-		0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
-		HPIPE_PWR_CTR_SFT_RST_MASK);
-	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
-		0x0 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
-		HPIPE_PWR_CTR_SFT_RST_MASK);
-
-	debug("stage: Comphy power up\n");
 	/*
 	 * MAC configuration power up comphy - power up PLL/TX/RX
 	 * use indirect address for vendor spesific SATA control register
@@ -981,469 +777,7 @@ static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base,
 	reg_set(sata_base + SATA3_VENDOR_DATA,
 		0x1 << SATA_MBUS_REGRET_EN_OFFSET, SATA_MBUS_REGRET_EN_MASK);
 
-	debug("stage: Check PLL\n");
-
-	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
-	data = SD_EXTERNAL_STATUS0_PLL_TX_MASK &
-		SD_EXTERNAL_STATUS0_PLL_RX_MASK;
-	mask = data;
-	data = polling_with_timeout(addr, data, mask, 15000);
-	if (data != 0) {
-		debug("Read from reg = %p - value = 0x%x\n",
-		      hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
-		pr_err("SD_EXTERNAL_STATUS0_PLL_TX is %d, SD_EXTERNAL_STATUS0_PLL_RX is %d\n",
-		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK),
-		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK));
-		ret = 0;
-	}
-
-	debug_exit();
-	return ret;
-}
-
-static int comphy_sgmii_power_up(u32 lane, u32 sgmii_speed,
-				 void __iomem *hpipe_base,
-				 void __iomem *comphy_base)
-{
-	u32 mask, data, ret = 1;
-	void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
-	void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane);
-	void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
-	void __iomem *addr;
-
-	debug_enter();
-	debug("stage: RFU configurations - hard reset comphy\n");
-	/* RFU configurations - hard reset comphy */
-	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
-	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
-	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
-	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
-	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
-
-	/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
-	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
-	data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
-	if (sgmii_speed == PHY_SPEED_1_25G) {
-		data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
-		data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
-	} else {
-		/* 3.125G */
-		data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
-		data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
-	}
-	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
-	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
-	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
-	data |= 1 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
-
-	/* release from hard reset */
-	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
-	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
-	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
-	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-	/* release from hard reset */
-	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-
-	/* Wait 1ms - until band gap and ref clock ready */
-	mdelay(1);
-
-	/* Start comphy Configuration */
-	debug("stage: Comphy configuration\n");
-	/* set reference clock */
-	mask = HPIPE_MISC_REFCLK_SEL_MASK;
-	data = 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
-	/* Power and PLL Control */
-	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
-	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
-	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
-	data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
-	/* Loopback register */
-	mask = HPIPE_LOOPBACK_SEL_MASK;
-	data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
-	/* rx control 1 */
-	mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
-	data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
-	mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
-	data |= 0x0 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
-	/* DTL Control */
-	mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
-	data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
-
-	/* Set analog paramters from ETP(HW) - for now use the default datas */
-	debug("stage: Analog paramters from ETP(HW)\n");
-
-	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG,
-		0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET,
-		HPIPE_G1_SET_0_G1_TX_EMPH1_MASK);
-
-	debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
-	/* SERDES External Configuration */
-	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
-
-	/* check PLL rx & tx ready */
-	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
-	data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
-		SD_EXTERNAL_STATUS0_PLL_TX_MASK;
-	mask = data;
-	data = polling_with_timeout(addr, data, mask, 15000);
-	if (data != 0) {
-		debug("Read from reg = %p - value = 0x%x\n",
-		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		pr_err("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
-		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
-		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
-		ret = 0;
-	}
-
-	/* RX init */
-	mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-	/* check that RX init done */
-	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
-	data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
-	mask = data;
-	data = polling_with_timeout(addr, data, mask, 100);
-	if (data != 0) {
-		debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		pr_err("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
-		ret = 0;
-	}
-
-	debug("stage: RF Reset\n");
-	/* RF Reset */
-	mask =  SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
-	data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-	debug_exit();
-	return ret;
-}
-
-static int comphy_sfi_power_up(u32 lane, void __iomem *hpipe_base,
-			       void __iomem *comphy_base, u32 speed)
-{
-	u32 mask, data, ret = 1;
-	void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
-	void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane);
-	void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
-	void __iomem *addr;
-
-	debug_enter();
-	debug("stage: RFU configurations - hard reset comphy\n");
-	/* RFU configurations - hard reset comphy */
-	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
-	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
-	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
-	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
-	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
-
-	/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
-	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
-	data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
-	data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
-	data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
-	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
-	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
-	data |= 0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
-
-	/* release from hard reset */
-	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
-	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
-	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
-	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-
-	/* Wait 1ms - until band gap and ref clock ready */
-	mdelay(1);
-
-	/* Start comphy Configuration */
-	debug("stage: Comphy configuration\n");
-	/* set reference clock */
-	mask = HPIPE_MISC_ICP_FORCE_MASK;
-	data = (speed == PHY_SPEED_5_15625G) ?
-		(0x0 << HPIPE_MISC_ICP_FORCE_OFFSET) :
-		(0x1 << HPIPE_MISC_ICP_FORCE_OFFSET);
-	mask |= HPIPE_MISC_REFCLK_SEL_MASK;
-	data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
-	/* Power and PLL Control */
-	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
-	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
-	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
-	data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
-	/* Loopback register */
-	mask = HPIPE_LOOPBACK_SEL_MASK;
-	data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
-	/* rx control 1 */
-	mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
-	data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
-	mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
-	data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
-	/* DTL Control */
-	mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
-	data = 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
-
-	/* Transmitter/Receiver Speed Divider Force */
-	if (speed == PHY_SPEED_5_15625G) {
-		mask = HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK;
-		data = 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET;
-		mask |= HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK;
-		data |= 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET;
-		mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK;
-		data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET;
-		mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK;
-		data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET;
-	} else {
-		mask = HPIPE_TXDIGCK_DIV_FORCE_MASK;
-		data = 0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET;
-	}
-	reg_set(hpipe_addr + HPIPE_SPD_DIV_FORCE_REG, data, mask);
-
-	/* Set analog paramters from ETP(HW) */
-	debug("stage: Analog paramters from ETP(HW)\n");
-	/* SERDES External Configuration 2 */
-	mask = SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask);
-	/* 0x7-DFE Resolution control */
-	mask = HPIPE_DFE_RES_FORCE_MASK;
-	data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
-	/* 0xd-G1_Setting_0 */
-	if (speed == PHY_SPEED_5_15625G) {
-		mask = HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
-		data = 0x6 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
-	} else {
-		mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
-		data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
-		mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
-		data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
-	}
-	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
-	/* Genration 1 setting 2 (G1_Setting_2) */
-	mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK;
-	data = 0x0 << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET;
-	mask |= HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK;
-	data |= 0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G1_SET_2_REG, data, mask);
-	/* Transmitter Slew Rate Control register (tx_reg1) */
-	mask = HPIPE_TX_REG1_TX_EMPH_RES_MASK;
-	data = 0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET;
-	mask |= HPIPE_TX_REG1_SLC_EN_MASK;
-	data |= 0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_TX_REG1_REG, data, mask);
-	/* Impedance Calibration Control register (cal_reg1) */
-	mask = HPIPE_CAL_REG_1_EXT_TXIMP_MASK;
-	data = 0xe << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
-	mask |= HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK;
-	data |= 0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_CAL_REG1_REG, data, mask);
-	/* Generation 1 Setting 5 (g1_setting_5) */
-	mask = HPIPE_G1_SETTING_5_G1_ICP_MASK;
-	data = 0 << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G1_SETTING_5_REG, data, mask);
-	/* 0xE-G1_Setting_1 */
-	mask = HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
-	data = 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
-	if (speed == PHY_SPEED_5_15625G) {
-		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
-		data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
-		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
-		data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
-	} else {
-		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
-		data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
-		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
-		data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
-		mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
-		data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
-		mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
-		data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
-		mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
-		data |= 0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
-	}
-	reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
-
-	/* 0xA-DFE_Reg3 */
-	mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
-	data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
-	mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
-	data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
-
-	/* 0x111-G1_Setting_4 */
-	mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
-	data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
-	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
-	/* Genration 1 setting 3 (G1_Setting_3) */
-	mask = HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK;
-	data = 0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET;
-	if (speed == PHY_SPEED_5_15625G) {
-		/* Force FFE (Feed Forward Equalization) to 5G */
-		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
-		data |= 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
-		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
-		data |= 0x4 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
-		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
-		data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
-	}
-	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
-
-	/* Connfigure RX training timer */
-	mask = HPIPE_RX_TRAIN_TIMER_MASK;
-	data = 0x13 << HPIPE_RX_TRAIN_TIMER_OFFSET;
-	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask);
-
-	/* Enable TX train peak to peak hold */
-	mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
-	data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
-	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask);
-
-	/* Configure TX preset index */
-	mask = HPIPE_TX_PRESET_INDEX_MASK;
-	data = 0x2 << HPIPE_TX_PRESET_INDEX_OFFSET;
-	reg_set(hpipe_addr + HPIPE_TX_PRESET_INDEX_REG, data, mask);
-
-	/* Disable pattern lock lost timeout */
-	mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
-	data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
-
-	/* Configure TX training pattern and TX training 16bit auto */
-	mask = HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK;
-	data = 0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET;
-	mask |= HPIPE_TX_TRAIN_PAT_SEL_MASK;
-	data |= 0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask);
-
-	/* Configure Training patten number */
-	mask = HPIPE_TRAIN_PAT_NUM_MASK;
-	data = 0x88 << HPIPE_TRAIN_PAT_NUM_OFFSET;
-	reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_0_REG, data, mask);
-
-	/* Configure differencial manchester encoter to ethernet mode */
-	mask = HPIPE_DME_ETHERNET_MODE_MASK;
-	data = 0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_DME_REG, data, mask);
-
-	/* Configure VDD Continuous Calibration */
-	mask = HPIPE_CAL_VDD_CONT_MODE_MASK;
-	data = 0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_VDD_CAL_0_REG, data, mask);
-
-	/* Trigger sampler enable pulse (by toggleing the bit) */
-	mask = HPIPE_RX_SAMPLER_OS_GAIN_MASK;
-	data = 0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET;
-	mask |= HPIPE_SMAPLER_MASK;
-	data |= 0x1 << HPIPE_SMAPLER_OFFSET;
-	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
-	mask = HPIPE_SMAPLER_MASK;
-	data = 0x0 << HPIPE_SMAPLER_OFFSET;
-	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
-
-	/* Set External RX Regulator Control */
-	mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
-	data = 0x1A << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
-
-	debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
-	/* SERDES External Configuration */
-	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
-
-
-	/* check PLL rx & tx ready */
-	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
-	data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
-		SD_EXTERNAL_STATUS0_PLL_TX_MASK;
-	mask = data;
-	data = polling_with_timeout(addr, data, mask, 15000);
-	if (data != 0) {
-		debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		pr_err("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
-		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
-		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
-		ret = 0;
-	}
-
-	/* RX init */
-	mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-
-	/* check that RX init done */
-	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
-	data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
-	mask = data;
-	data = polling_with_timeout(addr, data, mask, 100);
-	if (data != 0) {
-		debug("Read from reg = %p - value = 0x%x\n",
-		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		pr_err("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
-		ret = 0;
-	}
-
-	debug("stage: RF Reset\n");
-	/* RF Reset */
-	mask =  SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
-	data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+	ret = comphy_smc(MV_SIP_COMPHY_PLL_LOCK, comphy_base_addr, lane, type);
 
 	debug_exit();
 	return ret;
@@ -1973,6 +1307,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 	void __iomem *comphy_base_addr, *hpipe_base_addr;
 	u32 comphy_max_count, lane, ret = 0;
 	u32 pcie_width = 0;
+	u32 mode;
 
 	debug_enter();
 
@@ -2020,10 +1355,11 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 		case PHY_TYPE_SATA1:
 		case PHY_TYPE_SATA2:
 		case PHY_TYPE_SATA3:
-			ret = comphy_sata_power_up(
-				lane, hpipe_base_addr, comphy_base_addr,
-				ptr_chip_cfg->cp_index,
-				serdes_map[lane].invert);
+			mode =  COMPHY_FW_MODE_FORMAT(COMPHY_SATA_MODE);
+			ret = comphy_sata_power_up(lane, hpipe_base_addr,
+						   comphy_base_addr,
+						   ptr_chip_cfg->cp_index,
+						   mode);
 			break;
 		case PHY_TYPE_USB3_HOST0:
 		case PHY_TYPE_USB3_HOST1:
@@ -2033,6 +1369,25 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 			break;
 		case PHY_TYPE_SGMII0:
 		case PHY_TYPE_SGMII1:
+			if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
+				debug("Warning: ");
+				debug("SGMII PHY speed in lane %d is invalid,",
+				      lane);
+				debug(" set PHY speed to 1.25G\n");
+				ptr_comphy_map->speed = PHY_SPEED_1_25G;
+			}
+
+			/*
+			 * UINIT_ID not relevant for SGMII0 and SGMII1 - will be
+			 * ignored by firmware
+			 */
+			mode = COMPHY_FW_FORMAT(COMPHY_SGMII_MODE,
+						COMPHY_UNIT_ID0,
+						ptr_comphy_map->speed);
+			ret = comphy_smc(MV_SIP_COMPHY_POWER_ON,
+					 ptr_chip_cfg->comphy_base_addr, lane,
+					 mode);
+			break;
 		case PHY_TYPE_SGMII2:
 		case PHY_TYPE_SGMII3:
 			if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
@@ -2040,14 +1395,21 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 				      lane);
 				ptr_comphy_map->speed = PHY_SPEED_1_25G;
 			}
-			ret = comphy_sgmii_power_up(
-				lane, ptr_comphy_map->speed, hpipe_base_addr,
-				comphy_base_addr);
+
+			mode = COMPHY_FW_FORMAT(COMPHY_SGMII_MODE,
+						COMPHY_UNIT_ID2,
+						ptr_comphy_map->speed);
+			ret = comphy_smc(MV_SIP_COMPHY_POWER_ON,
+					 ptr_chip_cfg->comphy_base_addr, lane,
+					 mode);
 			break;
 		case PHY_TYPE_SFI:
-			ret = comphy_sfi_power_up(lane, hpipe_base_addr,
-						  comphy_base_addr,
-						  ptr_comphy_map->speed);
+			mode = COMPHY_FW_FORMAT(COMPHY_SFI_MODE,
+						COMPHY_UNIT_ID0,
+						ptr_comphy_map->speed);
+			ret = comphy_smc(MV_SIP_COMPHY_POWER_ON,
+					 ptr_chip_cfg->comphy_base_addr, lane,
+					 mode);
 			break;
 		case PHY_TYPE_RXAUI0:
 		case PHY_TYPE_RXAUI1:
-- 
2.28.0



More information about the U-Boot mailing list