[PATCH] km: replace hardcoded address for imported environment
Holger Brunck
holger.brunck at hitachi-powergrids.com
Thu Oct 29 13:48:01 CET 2020
From: Matteo Ghidoni <matteo.ghidoni at hitachi-powergrids.com>
Instead of using an hard coded address, make use of an
already defined address for importing the environment
for ramfs and nfs boot. This allows boards having different
mapping to use the same code.
CC: Heiko Schocher <hs at denx.de>
CC: Tom Rini <trini at konsulko.com>
Signed-off-by: Matteo Ghidoni <matteo.ghidoni at hitachi-powergrids.com>
Signed-off-by: Holger Brunck <holger.brunck at hitachi-powergrids.com>
---
board/keymile/scripts/develop-arm.txt | 2 +-
board/keymile/scripts/develop-common.txt | 2 +-
board/keymile/scripts/develop-ppc_82xx.txt | 2 +-
board/keymile/scripts/develop-ppc_8xx.txt | 2 +-
board/keymile/scripts/ramfs-arm.txt | 2 +-
board/keymile/scripts/ramfs-common.txt | 2 +-
board/keymile/scripts/ramfs-ppc_82xx.txt | 2 +-
board/keymile/scripts/ramfs-ppc_8xx.txt | 2 +-
include/configs/km/keymile-common.h | 8 ++++----
9 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/board/keymile/scripts/develop-arm.txt b/board/keymile/scripts/develop-arm.txt
index d3c974f1f9..4c12d3e1c4 100644
--- a/board/keymile/scripts/develop-arm.txt
+++ b/board/keymile/scripts/develop-arm.txt
@@ -1 +1 @@
-setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
+setup_debug_env=tftpboot ${load_addr_r} scripts/develop-common.txt && env import -t ${load_addr_r} ${filesize} && run configure
diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt
index f77a26abe8..4384c0da30 100644
--- a/board/keymile/scripts/develop-common.txt
+++ b/board/keymile/scripts/develop-common.txt
@@ -9,4 +9,4 @@ toolchain=/opt/eldk
rootfssize=0
set_uimage=printenv uimage || setenv uimage uImage
set_tftppath=if test ${hostname} = kmcoge5un; then setenv tftppath CI5UN; else if test ${hostname} = kmcoge5ne; then setenv tftppath CI5NE; else setenv tftppath ${IVM_Symbol}; fi; fi
-try_import_nfs_path=if tftpboot 0x200000 ${tftppath}/nfs-path.txt; then env import -t 0x200000 ${filesize}; else echo no auto nfs path imported; echo you can set nfsargs in /tftpboot/${tftppath}/nfs-path.txt and rerun develop; fi
+try_import_nfs_path=if tftpboot ${load_addr_r} ${tftppath}/nfs-path.txt; then env import -t ${load_addr_r} ${filesize}; else echo no auto nfs path imported; echo you can set nfsargs in /tftpboot/${tftppath}/nfs-path.txt and rerun develop; fi
diff --git a/board/keymile/scripts/develop-ppc_82xx.txt b/board/keymile/scripts/develop-ppc_82xx.txt
index d3c974f1f9..4c12d3e1c4 100644
--- a/board/keymile/scripts/develop-ppc_82xx.txt
+++ b/board/keymile/scripts/develop-ppc_82xx.txt
@@ -1 +1 @@
-setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
+setup_debug_env=tftpboot ${load_addr_r} scripts/develop-common.txt && env import -t ${load_addr_r} ${filesize} && run configure
diff --git a/board/keymile/scripts/develop-ppc_8xx.txt b/board/keymile/scripts/develop-ppc_8xx.txt
index d3c974f1f9..4c12d3e1c4 100644
--- a/board/keymile/scripts/develop-ppc_8xx.txt
+++ b/board/keymile/scripts/develop-ppc_8xx.txt
@@ -1 +1 @@
-setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
+setup_debug_env=tftpboot ${load_addr_r} scripts/develop-common.txt && env import -t ${load_addr_r} ${filesize} && run configure
diff --git a/board/keymile/scripts/ramfs-arm.txt b/board/keymile/scripts/ramfs-arm.txt
index 87e984e179..93f87fabab 100644
--- a/board/keymile/scripts/ramfs-arm.txt
+++ b/board/keymile/scripts/ramfs-arm.txt
@@ -1 +1 @@
-setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
+setup_debug_env=tftpboot ${load_addr_r} scripts/ramfs-common.txt && env import -t ${load_addr_r} ${filesize} && run configure
diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt
index 290c602aab..e590a2bee6 100644
--- a/board/keymile/scripts/ramfs-common.txt
+++ b/board/keymile/scripts/ramfs-common.txt
@@ -12,4 +12,4 @@ tftpkernel=tftpboot ${load_addr_r} ${tftppath}/${uimage}
tftpramfs=tftpboot ${rootfsaddr} ${tftppath}/rootfsImage
set_uimage=printenv uimage || setenv uimage uImage
set_tftppath=if test ${hostname} = kmcoge5un; then setenv tftppath CI5UN; else if test ${hostname} = kmcoge5ne; then setenv tftppath CI5NE; else setenv tftppath ${IVM_Symbol}; fi; fi
-try_import_rootfssize=if tftpboot 0x200000 ${tftppath}/rootfssize.txt; then env import -t 0x200000 ${filesize}; else echo no auto rootfs size; echo you can set rootfssize in /tftpboot/${tftppath}/rootfssize.txt and rerun ramfs; fi
+try_import_rootfssize=if tftpboot ${load_addr_r} ${tftppath}/rootfssize.txt; then env import -t ${load_addr_r} ${filesize}; else echo no auto rootfs size; echo you can set rootfssize in /tftpboot/${tftppath}/rootfssize.txt and rerun ramfs; fi
diff --git a/board/keymile/scripts/ramfs-ppc_82xx.txt b/board/keymile/scripts/ramfs-ppc_82xx.txt
index 87e984e179..93f87fabab 100644
--- a/board/keymile/scripts/ramfs-ppc_82xx.txt
+++ b/board/keymile/scripts/ramfs-ppc_82xx.txt
@@ -1 +1 @@
-setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
+setup_debug_env=tftpboot ${load_addr_r} scripts/ramfs-common.txt && env import -t ${load_addr_r} ${filesize} && run configure
diff --git a/board/keymile/scripts/ramfs-ppc_8xx.txt b/board/keymile/scripts/ramfs-ppc_8xx.txt
index 87e984e179..93f87fabab 100644
--- a/board/keymile/scripts/ramfs-ppc_8xx.txt
+++ b/board/keymile/scripts/ramfs-ppc_8xx.txt
@@ -1 +1 @@
-setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
+setup_debug_env=tftpboot ${load_addr_r} scripts/ramfs-common.txt && env import -t ${load_addr_r} ${filesize} && run configure
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index c1968048a7..851b13e063 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -90,12 +90,12 @@
"set_fdthigh cramfsloadkernel flashargs add_default " \
"addpanic boot\0" \
"develop=" \
- "tftp 200000 scripts/develop-${arch}.txt && " \
- "env import -t 200000 ${filesize} && " \
+ "tftp ${load_addr_r} scripts/develop-${arch}.txt && " \
+ "env import -t ${load_addr_r} ${filesize} && " \
"run setup_debug_env\0" \
"ramfs=" \
- "tftp 200000 scripts/ramfs-${arch}.txt && " \
- "env import -t 200000 ${filesize} && " \
+ "tftp ${load_addr_r} scripts/ramfs-${arch}.txt && " \
+ "env import -t ${load_addr_r} ${filesize} && " \
"run setup_debug_env\0" \
""
--
2.26.0
More information about the U-Boot
mailing list