[PATCH v2 00/10] net: ti: icssg: Add prueth support
Roger Quadros
rogerq at ti.com
Mon Oct 26 13:47:58 CET 2020
Hi Christian,
On 26/10/2020 14:37, Christian Gmeiner wrote:
> Hi all
>
> Is there any update regarding this patch series?
I am working on revising this driver. Once ready I will post the updated version upstream.
cheers,
-roger
>
>
>
> Am Do., 20. Feb. 2020 um 10:19 Uhr schrieb Keerthy <j-keerthy at ti.com>:
>>
>>
>>
>> On 18/02/20 10:39 am, Keerthy wrote:
>>> The series adds support for icssg_prueth functionality
>>> on u-boot. This series is based on top of master branch.
>>> rproc init needs to be done from uboot command prompt.
>>> The pru/rtu firmware loading is done by prueth driver soon after
>>> config paramters are setup.
>>
>> A quick update on this series. It seems newer version of this hardware
>> needs more modifications to this series. Hence please ignore v2.
>>
>> Best Regards,
>> Keerthy
>>
>>>
>>> Currently only slice0/1 of icssg2 instance on am6-evm
>>> is supported. i.e Both slices of icssg2 instance are supported.
>>>
>>> Prebuilt firmware can be obtained from AM65 procSDK [1] rootfs at /lib/firmware/ti-pruss/am65x*.elf
>>>
>>> [1] http://software-dl.ti.com/processor-sdk-linux/esd/AM65X/latest/index_FDS.html
>>>
>>> This tests tftp on prueth.
>>>
>>> Note: Uboot ethernet driver architecture supports once
>>> instance per probe. So only one of the ports are supported
>>> per instance. So DT of prueth node should have either ethernet-mii0
>>> or ethernet-mii1.
>>>
>>> Changes in v2:
>>>
>>> It has been a while since v1 was posted. Here are the changes:
>>>
>>> * Removed the usage of misc_init_by_ofnode instead used
>>> uclass_get_device_by_ofnode.
>>> * Introduced started variable to keep track of the status of the
>>> prueth device.
>>> * Build Tested on Travis: https://travis-ci.org/Keerthyj/u-boot/builds/651449684
>>>
>>> Keerthy (10):
>>> net: eth-uclass: eth_get_dev based on SEQ_ALIAS instead of probe order
>>> soc: ti: pruss: add a misc driver for PRUSS in TI SoCs
>>> remoteproc: pruss: add PRU remoteproc driver
>>> net: ti: icssg-prueth: Add ICSSG ethernet driver
>>> arm: dts: k3-am65-main: Add msmc_ram node
>>> arm: dts: k3-am654-base-board-u-boot: Add icssg specific msmc_ram
>>> carveout nodes
>>> arm: dts: k3-am65-main: Add scm_conf node
>>> arm: dts: k3-am65-main: Add pruss nodes for ICSSG2
>>> arm64: dts: ti: am654-base-board: add ICSSG2 Ethernet support
>>> configs: am65x_evm_a53_defconfig: Enable CONFIG_TI_AM64_ICSSG_PRUETH
>>>
>>> arch/arm/dts/k3-am65-main.dtsi | 191 ++++++
>>> arch/arm/dts/k3-am65.dtsi | 4 +-
>>> arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 129 ++++
>>> configs/am65x_evm_a53_defconfig | 3 +
>>> drivers/net/ti/Kconfig | 8 +
>>> drivers/net/ti/Makefile | 1 +
>>> drivers/net/ti/icssg-prueth.c | 652 +++++++++++++++++++
>>> drivers/net/ti/icssg.h | 36 +
>>> drivers/net/ti/icssg_classifier.c | 396 +++++++++++
>>> drivers/remoteproc/Kconfig | 11 +
>>> drivers/remoteproc/Makefile | 1 +
>>> drivers/remoteproc/pru_rproc.c | 405 ++++++++++++
>>> drivers/soc/ti/Kconfig | 12 +
>>> drivers/soc/ti/Makefile | 1 +
>>> drivers/soc/ti/pruss.c | 152 +++++
>>> include/ti-pruss.h | 17 +
>>> net/eth-uclass.c | 12 +-
>>> 17 files changed, 2027 insertions(+), 4 deletions(-)
>>> create mode 100644 drivers/net/ti/icssg-prueth.c
>>> create mode 100644 drivers/net/ti/icssg.h
>>> create mode 100644 drivers/net/ti/icssg_classifier.c
>>> create mode 100644 drivers/remoteproc/pru_rproc.c
>>> create mode 100644 drivers/soc/ti/pruss.c
>>> create mode 100644 include/ti-pruss.h
>>>
>
>
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the U-Boot
mailing list