[PATCH v3 0/8] add SAM9X60 clock support

[Claudiu Beznea]

Hi,

This series adds SAM9X60 clock support, CCF compatible, so that
SAM9X60 based boards (e.g. SAM9X60-EK in this case) to be able
to boot with mainline code.

This series is based on u-boot-atmel/next.

Thank you,
Claudiu Beznea

Changes in v3:
- move u-boot,dm-pre-reloc properties to sam9x60ek-u-boot.dtsi
- add main_xtal to sam9x60ek-u-boot.dtsi in patch 8/8

Changes in v2:
- remove "Alignment should match open parenthesis" and
  "Please don't use multiple blank lines" checkpatch.pl warnings
- use u-boot,dm-pre-reloc also in sam9x60ek-u-boot.dtsi
- add patch 8/8

Claudiu Beznea (8):
  board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR
  clk: at91: sam9x60: add support compatible with CCF
  ARM: dts: sam9x60ek: add clock frequencies to board file
  ARM: dts: sam9x60: use u-boot,dm-pre-reloc
  ARM: dts: sam9x60: use slow clock CCF compatible bindings
  ARM: dts: sam9x60: use CCF compatibles for PMC
  configs: sam9x60ek: update defconfigs for CCF
  ARM: dts: sam9x60: use alphabetical order

 arch/arm/dts/sam9x60.dtsi             | 171 ++-------
 arch/arm/dts/sam9x60ek-u-boot.dtsi    |  70 +---
 arch/arm/dts/sam9x60ek.dts            |  12 +-
 configs/sam9x60ek_mmc_defconfig       |   4 +-
 configs/sam9x60ek_nandflash_defconfig |   4 +-
 configs/sam9x60ek_qspiflash_defconfig |   4 +-
 drivers/clk/at91/Makefile             |   1 +
 drivers/clk/at91/sam9x60.c            | 649 ++++++++++++++++++++++++++++++++++
 include/configs/sam9x60ek.h           |   3 +-
 9 files changed, 716 insertions(+), 202 deletions(-)
 create mode 100644 drivers/clk/at91/sam9x60.c

-- 
2.7.4