[PATCH v2 15/30] x86: Show the interrupt pointer with 'irqinfo'

Simon Glass sjg at chromium.org
Thu Oct 22 05:02:48 CEST 2020


It is useful for this command to show the address of the interrupt table.
Add support for this.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---

(no changes since v1)

 arch/x86/cpu/i386/interrupt.c    | 14 +++++++-------
 arch/x86/include/asm/interrupt.h | 17 +++++++++++++++++
 arch/x86/lib/interrupts.c        |  3 +++
 3 files changed, 27 insertions(+), 7 deletions(-)

diff --git a/arch/x86/cpu/i386/interrupt.c b/arch/x86/cpu/i386/interrupt.c
index c0c4bc95fd9..d85f84b29a7 100644
--- a/arch/x86/cpu/i386/interrupt.c
+++ b/arch/x86/cpu/i386/interrupt.c
@@ -180,16 +180,11 @@ struct idt_entry {
 	u16	base_high;
 } __packed;
 
-struct desc_ptr {
-	unsigned short size;
-	unsigned long address;
-} __packed;
-
 struct idt_entry idt[256] __aligned(16);
 
-struct desc_ptr idt_ptr;
+struct idt_ptr idt_ptr;
 
-static inline void load_idt(const struct desc_ptr *dtr)
+static inline void load_idt(const struct idt_ptr *dtr)
 {
 	asm volatile("cs lidt %0" : : "m" (*dtr));
 }
@@ -232,6 +227,11 @@ int cpu_init_interrupts(void)
 	return 0;
 }
 
+void interrupt_read_idt(struct idt_ptr *ptr)
+{
+	asm volatile("sidt %0" : : "m" (*ptr));
+}
+
 void *x86_get_idt(void)
 {
 	return &idt_ptr;
diff --git a/arch/x86/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h
index fdeb8571132..e23fb2c8e72 100644
--- a/arch/x86/include/asm/interrupt.h
+++ b/arch/x86/include/asm/interrupt.h
@@ -38,6 +38,16 @@ enum x86_exception {
 	EXC_VE
 };
 
+/**
+ * struct idt_ptr - Holds the IDT (Interrupt Descriptor Table)
+ *
+ * @size: Size of IDT in bytes
+ */
+struct idt_ptr {
+	unsigned short size;
+	unsigned long address;
+} __packed;
+
 /* arch/x86/cpu/interrupts.c */
 void set_vector(u8 intnum, void *routine);
 
@@ -61,4 +71,11 @@ void configure_irq_trigger(int int_num, bool is_level_triggered);
 
 void *x86_get_idt(void);
 
+/**
+ * interrupt_read_idt() - Read the IDT
+ *
+ * @ptr: Place to put IDT contents
+ */
+void interrupt_read_idt(struct idt_ptr *ptr);
+
 #endif
diff --git a/arch/x86/lib/interrupts.c b/arch/x86/lib/interrupts.c
index a81e4291105..ff52959ed28 100644
--- a/arch/x86/lib/interrupts.c
+++ b/arch/x86/lib/interrupts.c
@@ -131,8 +131,11 @@ void do_irq(int hw_irq)
 int do_irqinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
 #if !CONFIG_IS_ENABLED(X86_64)
+	struct idt_ptr ptr;
 	int irq;
 
+	interrupt_read_idt(&ptr);
+	printf("IDT at %lx, size %x\n", ptr.address, ptr.size);
 	printf("Spurious IRQ: %u, last unknown IRQ: %d\n",
 			spurious_irq_cnt, spurious_irq);
 
-- 
2.29.0.rc1.297.gfa9743e501-goog



More information about the U-Boot mailing list