[PATCH 1/4] xilinx: common: Add Makefile to common folder

[Michal Simek]

There is no need to reference files in common folder back. Simply adding
Makefile to this folder does the job because this "common" location is
already wired in main Makefile.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 board/xilinx/common/Makefile | 7 +++++++
 board/xilinx/versal/Makefile | 1 -
 board/xilinx/zynq/Makefile   | 1 -
 board/xilinx/zynqmp/Makefile | 1 -
 4 files changed, 7 insertions(+), 3 deletions(-)
 create mode 100644 board/xilinx/common/Makefile

diff --git a/board/xilinx/common/Makefile b/board/xilinx/common/Makefile
new file mode 100644
index 000000000000..3600da464b87
--- /dev/null
+++ b/board/xilinx/common/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# (C) Copyright 2020 Xilinx, Inc.
+# Michal Simek <michal.simek at xilinx.com>
+#
+
+obj-y	+= board.o
diff --git a/board/xilinx/versal/Makefile b/board/xilinx/versal/Makefile
index 90e034315406..4a46ca02d705 100644
--- a/board/xilinx/versal/Makefile
+++ b/board/xilinx/versal/Makefile
@@ -6,4 +6,3 @@
 
 obj-y	:= board.o
 obj-$(CONFIG_CMD_VERSAL)	+= cmds.o
-obj-y	+= ../common/board.o
diff --git a/board/xilinx/zynq/Makefile b/board/xilinx/zynq/Makefile
index 096a7aceb939..856617158917 100644
--- a/board/xilinx/zynq/Makefile
+++ b/board/xilinx/zynq/Makefile
@@ -4,7 +4,6 @@
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
 obj-y	:= board.o
-obj-y	+= ../common/board.o
 
 ifneq ($(CONFIG_XILINX_PS_INIT_FILE),"")
 PS_INIT_FILE := $(shell cd $(srctree); readlink -f $(CONFIG_XILINX_PS_INIT_FILE))
diff --git a/board/xilinx/zynqmp/Makefile b/board/xilinx/zynqmp/Makefile
index 398c6aaa452a..7d8277ca4004 100644
--- a/board/xilinx/zynqmp/Makefile
+++ b/board/xilinx/zynqmp/Makefile
@@ -4,7 +4,6 @@
 # Michal Simek <michal.simek at xilinx.com>
 
 obj-y	:= zynqmp.o
-obj-y	+= ../common/board.o
 
 ifneq ($(CONFIG_XILINX_PS_INIT_FILE),"")
 PS_INIT_FILE := $(shell cd $(srctree); readlink -f $(CONFIG_XILINX_PS_INIT_FILE))
-- 
2.28.0