[PATCH 02/18] mips: mtmips: move mt7628 related Kconfig into mt7628 subdirectory

[Stefan Roese]

On 16.10.20 09:35, Weijie Gao wrote:
> This patch is a preparation for add a new soc fot mtmips.
> 
> Move all mt7628 related Kconfig (boards and UART selection) into mt7628
> subdirectory and make sure the top directory of mtmips contains only
> selection for SoCs.
> 
> Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   arch/mips/mach-mtmips/Kconfig        | 53 +---------------------------
>   arch/mips/mach-mtmips/mt7628/Kconfig | 53 ++++++++++++++++++++++++++++
>   2 files changed, 54 insertions(+), 52 deletions(-)
>   create mode 100644 arch/mips/mach-mtmips/mt7628/Kconfig
> 
> diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig
> index 737de2cb8e..7c07430a0c 100644
> --- a/arch/mips/mach-mtmips/Kconfig
> +++ b/arch/mips/mach-mtmips/Kconfig
> @@ -58,57 +58,6 @@ config SOC_MT7628
>   
>   endchoice
>   
> -choice
> -	prompt "Board select"
> -
> -config BOARD_GARDENA_SMART_GATEWAY_MT7688
> -	bool "GARDENA smart Gateway"
> -	depends on SOC_MT7628
> -	select BOARD_LATE_INIT
> -	help
> -	  GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
> -	  and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.
> -
> -config BOARD_LINKIT_SMART_7688
> -	bool "LinkIt Smart 7688"
> -	depends on SOC_MT7628
> -	help
> -	  Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
> -	  and 32 MiB of flash (SPI).
> -	  Between its different peripherals there's an integrated switch with 4
> -	  ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
> -	  a MT7688 (PCIe).
> -
> -config BOARD_MT7628_RFB
> -	bool "MediaTek MT7628 RFB"
> -	depends on SOC_MT7628
> -	help
> -	  The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
> -	  SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
> -	  1 SDXC, 1 PCIe socket and JTAG pins.
> -
> -config BOARD_VOCORE2
> -	bool "VoCore2"
> -	depends on SOC_MT7628
> -	select SPL_SERIAL_SUPPORT
> -	select SPL_UART2_SPIS_PINMUX
> -	help
> -	  VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
> -	  and 16 MiB of flash (SPI).
> -
> -endchoice
> -
> -config SPL_UART2_SPIS_PINMUX
> -	bool "Use alternative pinmux for UART2 in SPL stage"
> -	depends on SPL_SERIAL_SUPPORT
> -	default n
> -	help
> -	  Select this if the UART2 of your board is connected to GPIO 16/17
> -	  (shared with SPIS) rather than the usual GPIO 20/21.
> -
> -source "board/gardena/smart-gateway-mt7688/Kconfig"
> -source "board/mediatek/mt7628/Kconfig"
> -source "board/seeed/linkit-smart-7688/Kconfig"
> -source "board/vocore/vocore2/Kconfig"
> +source "arch/mips/mach-mtmips/mt7628/Kconfig"
>   
>   endmenu
> diff --git a/arch/mips/mach-mtmips/mt7628/Kconfig b/arch/mips/mach-mtmips/mt7628/Kconfig
> new file mode 100644
> index 0000000000..e3f56e782e
> --- /dev/null
> +++ b/arch/mips/mach-mtmips/mt7628/Kconfig
> @@ -0,0 +1,53 @@
> +
> +if SOC_MT7628
> +
> +choice
> +	prompt "Board select"
> +
> +config BOARD_GARDENA_SMART_GATEWAY_MT7688
> +	bool "GARDENA smart Gateway"
> +	select BOARD_LATE_INIT
> +	help
> +	  GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
> +	  and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.
> +
> +config BOARD_LINKIT_SMART_7688
> +	bool "LinkIt Smart 7688"
> +	help
> +	  Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
> +	  and 32 MiB of flash (SPI).
> +	  Between its different peripherals there's an integrated switch with 4
> +	  ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
> +	  a MT7688 (PCIe).
> +
> +config BOARD_MT7628_RFB
> +	bool "MediaTek MT7628 RFB"
> +	help
> +	  The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
> +	  SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
> +	  1 SDXC, 1 PCIe socket and JTAG pins.
> +
> +config BOARD_VOCORE2
> +	bool "VoCore2"
> +	select SPL_SERIAL_SUPPORT
> +	select SPL_UART2_SPIS_PINMUX
> +	help
> +	  VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
> +	  and 16 MiB of flash (SPI).
> +
> +endchoice
> +
> +config SPL_UART2_SPIS_PINMUX
> +	bool "Use alternative pinmux for UART2 in SPL stage"
> +	depends on SPL_SERIAL_SUPPORT
> +	default n
> +	help
> +	  Select this if the UART2 of your board is connected to GPIO 16/17
> +	  (shared with SPIS) rather than the usual GPIO 20/21.
> +
> +source "board/gardena/smart-gateway-mt7688/Kconfig"
> +source "board/mediatek/mt7628/Kconfig"
> +source "board/seeed/linkit-smart-7688/Kconfig"
> +source "board/vocore/vocore2/Kconfig"
> +
> +endif
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de