[PATCH v1 6/9] verdin-imx8mm: implement hardware version detection
Igor Opaniuk
igor.opaniuk at gmail.com
Wed Oct 28 10:58:13 CET 2020
From: Max Krummenacher <max.krummenacher at toradex.com>
And select the correct devicetree accordingly by setting the variant
environment variable.
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
---
board/toradex/verdin-imx8mm/verdin-imx8mm.c | 71 +++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
index 66950ed218..9c6f35e778 100644
--- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c
+++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
@@ -8,12 +8,22 @@
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
+#include <i2c.h>
#include <miiphy.h>
#include <netdev.h>
#include <micrel.h>
+#include "../common/tdx-cfg-block.h"
+
DECLARE_GLOBAL_DATA_PTR;
+#define I2C_PMIC 0
+
+enum pcb_rev_t {
+ PCB_VERSION_1_0,
+ PCB_VERSION_1_1
+};
+
#if IS_ENABLED(CONFIG_FEC_MXC)
static int setup_fec(void)
{
@@ -104,8 +114,69 @@ int board_mmc_get_env_dev(int devno)
return devno;
}
+static enum pcb_rev_t get_pcb_revision(void)
+{
+ struct udevice *bus;
+ struct udevice *i2c_dev = NULL;
+ int ret;
+ u8 is_bd71837 = 0;
+
+ ret = uclass_get_device_by_seq(UCLASS_I2C, I2C_PMIC, &bus);
+ if (!ret)
+ ret = dm_i2c_probe(bus, 0x4b, 0, &i2c_dev);
+ if (!ret)
+ ret = dm_i2c_read(i2c_dev, 0x0, &is_bd71837, 1);
+
+ /* BD71837_REV, High Nibble is major version, fix 1010 */
+ is_bd71837 = !ret && ((is_bd71837 & 0xf0) == 0xa0);
+ return is_bd71837 ? PCB_VERSION_1_0 : PCB_VERSION_1_1;
+}
+
+static void select_dt_from_module_version(void)
+{
+ char variant[32];
+ char *env_variant = env_get("variant");
+ int is_wifi = 0;
+
+ if (IS_ENABLED(CONFIG_TDX_CFG_BLOCK)) {
+ /*
+ * If we have a valid config block and it says we are a
+ * module with Wi-Fi/Bluetooth make sure we use the -wifi
+ * device tree.
+ */
+ is_wifi = (tdx_hw_tag.prodid == VERDIN_IMX8MMQ_WIFI_BT_IT) ||
+ (tdx_hw_tag.prodid == VERDIN_IMX8MMDL_WIFI_BT_IT);
+ }
+
+ switch (get_pcb_revision()) {
+ case PCB_VERSION_1_0:
+ printf("Detected a V1.0 module\n");
+ if (is_wifi)
+ strncpy(&variant[0], "wifi", sizeof(variant));
+ else
+ strncpy(&variant[0], "nonwifi", sizeof(variant));
+ break;
+ default:
+ if (is_wifi)
+ strncpy(&variant[0], "wifi-v1.1", sizeof(variant));
+ else
+ strncpy(&variant[0], "nonwifi-v1.1", sizeof(variant));
+ break;
+ }
+
+ if (strcmp(variant, env_variant)) {
+ printf("Setting variant to %s\n", variant);
+ env_set("variant", variant);
+
+ if (IS_ENABLED(CONFIG_ENV_IS_NOWHERE))
+ env_save();
+ }
+}
+
int board_late_init(void)
{
+ select_dt_from_module_version();
+
return 0;
}
--
2.17.1
More information about the U-Boot
mailing list