[PATCH 30/33] video: stm32_dsi: migrate trace to dev and log macro

[Patrick Delaunay]

Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 drivers/video/stm32/stm32_dsi.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/video/stm32/stm32_dsi.c b/drivers/video/stm32/stm32_dsi.c
index 9d5abacc2b..dcec0edafc 100644
--- a/drivers/video/stm32/stm32_dsi.c
+++ b/drivers/video/stm32/stm32_dsi.c
@@ -8,6 +8,8 @@
  * drivers/gpu/drm/stm/dw_mipi_dsi-stm.c.
  */
 
+#define LOG_CATEGORY UCLASS_VIDEO_BRIDGE
+
 #include <common.h>
 #include <clk.h>
 #include <dm.h>
@@ -133,7 +135,7 @@ static enum dsi_color dsi_color_from_mipi(u32 fmt)
 	case MIPI_DSI_FMT_RGB565:
 		return DSI_RGB565_CONF1;
 	default:
-		pr_err("MIPI color invalid, so we use rgb888\n");
+		log_err("MIPI color invalid, so we use rgb888\n");
 	}
 	return DSI_RGB888;
 }
@@ -213,14 +215,14 @@ static int dsi_phy_init(void *priv_data)
 	u32 val;
 	int ret;
 
-	debug("Initialize DSI physical layer\n");
+	dev_dbg(dev, "Initialize DSI physical layer\n");
 
 	/* Enable the regulator */
 	dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
 	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
 				 TIMEOUT_US);
 	if (ret) {
-		debug("!TIMEOUT! waiting REGU\n");
+		dev_dbg(dev, "!TIMEOUT! waiting REGU\n");
 		return ret;
 	}
 
@@ -229,7 +231,7 @@ static int dsi_phy_init(void *priv_data)
 	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
 				 TIMEOUT_US);
 	if (ret) {
-		debug("!TIMEOUT! waiting PLL\n");
+		dev_dbg(dev, "!TIMEOUT! waiting PLL\n");
 		return ret;
 	}
 
@@ -242,8 +244,8 @@ static void dsi_phy_post_set_mode(void *priv_data, unsigned long mode_flags)
 	struct udevice *dev = device->dev;
 	struct stm32_dsi_priv *dsi = dev_get_priv(dev);
 
-	debug("Set mode %p enable %ld\n", dsi,
-	      mode_flags & MIPI_DSI_MODE_VIDEO);
+	dev_dbg(dev, "Set mode %p enable %ld\n", dsi,
+		mode_flags & MIPI_DSI_MODE_VIDEO);
 
 	if (!dsi)
 		return;
@@ -325,8 +327,8 @@ static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings,
 
 	*lane_mbps = pll_out_khz / 1000;
 
-	debug("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
-	      pll_in_khz, pll_out_khz, *lane_mbps);
+	dev_dbg(dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
+		pll_in_khz, pll_out_khz, *lane_mbps);
 
 	return 0;
 }
-- 
2.17.1