[PATCH 29/33] video: stm32_ltdc: migrate trace to dev and log macro

Patrice CHOTARD patrice.chotard at st.com
Wed Oct 21 14:35:01 CEST 2020


Hi Patrick

On 10/14/20 11:16 AM, Patrick Delaunay wrote:
> Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>
>  drivers/video/stm32/stm32_ltdc.c | 33 +++++++++++++++++---------------
>  1 file changed, 18 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
> index 7fff735930..c5c990cc73 100644
> --- a/drivers/video/stm32/stm32_ltdc.c
> +++ b/drivers/video/stm32/stm32_ltdc.c
> @@ -5,6 +5,8 @@
>   *	      Yannick Fertre <yannick.fertre at st.com> for STMicroelectronics.
>   */
>  
> +#define LOG_CATEGORY UCLASS_VIDEO
> +
>  #include <common.h>
>  #include <clk.h>
>  #include <display.h>
> @@ -176,13 +178,13 @@ static u32 stm32_ltdc_get_pixel_format(enum video_log2_bpp l2bpp)
>  	case VIDEO_BPP2:
>  	case VIDEO_BPP4:
>  	default:
> -		pr_warn("%s: warning %dbpp not supported yet, %dbpp instead\n",
> -			__func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16));
> +		log_warning("warning %dbpp not supported yet, %dbpp instead\n",
> +			    VNBITS(l2bpp), VNBITS(VIDEO_BPP16));
>  		pf = PF_RGB565;
>  		break;
>  	}
>  
> -	debug("%s: %d bpp -> ltdc pf %d\n", __func__, VNBITS(l2bpp), pf);
> +	log_debug("%d bpp -> ltdc pf %d\n", VNBITS(l2bpp), pf);
>  
>  	return (u32)pf;
>  }
> @@ -249,7 +251,7 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,
>  
>  	/* Signal polarities */
>  	val = 0;
> -	debug("%s: timing->flags 0x%08x\n", __func__, timings->flags);
> +	log_debug("timing->flags 0x%08x\n", timings->flags);
>  	if (timings->flags & DISPLAY_FLAGS_HSYNC_HIGH)
>  		val |= GCR_HSPOL;
>  	if (timings->flags & DISPLAY_FLAGS_VSYNC_HIGH)
> @@ -379,8 +381,8 @@ static int stm32_ltdc_probe(struct udevice *dev)
>  		dev_warn(dev, "fail to set pixel clock %d hz\n",
>  			 timings.pixelclock.typ);
>  
> -	debug("%s: Set pixel clock req %d hz get %ld hz\n", __func__,
> -	      timings.pixelclock.typ, clk_get_rate(&pclk));
> +	dev_dbg(dev, "Set pixel clock req %d hz get %ld hz\n",
> +		timings.pixelclock.typ, clk_get_rate(&pclk));
>  
>  	ret = reset_get_by_index(dev, 0, &rst);
>  	if (ret) {
> @@ -394,12 +396,13 @@ static int stm32_ltdc_probe(struct udevice *dev)
>  	if (IS_ENABLED(CONFIG_VIDEO_BRIDGE)) {
>  		ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge);
>  		if (ret)
> -			debug("No video bridge, or no backlight on bridge\n");
> +			dev_dbg(dev,
> +				"No video bridge, or no backlight on bridge\n");
>  
>  		if (bridge) {
>  			ret = video_bridge_attach(bridge);
>  			if (ret) {
> -				dev_err(dev, "fail to attach bridge\n");
> +				dev_err(bridge, "fail to attach bridge\n");
>  				return ret;
>  			}
>  		}
> @@ -414,12 +417,12 @@ static int stm32_ltdc_probe(struct udevice *dev)
>  	priv->crop_h = timings.vactive.typ;
>  	priv->alpha = 0xFF;
>  
> -	debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__,
> -	      timings.hactive.typ, timings.vactive.typ,
> -	      VNBITS(priv->l2bpp), uc_plat->base);
> -	debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__,
> -	      priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
> -	      priv->bg_col_argb, priv->alpha);
> +	dev_dbg(dev, "%dx%d %dbpp frame buffer at 0x%lx\n",
> +		timings.hactive.typ, timings.vactive.typ,
> +		VNBITS(priv->l2bpp), uc_plat->base);
> +	dev_dbg(dev, "crop %d,%d %dx%d bg 0x%08x alpha %d\n",
> +		priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
> +		priv->bg_col_argb, priv->alpha);
>  
>  	/* Configure & start LTDC */
>  	stm32_ltdc_set_mode(priv, &timings);
> @@ -457,7 +460,7 @@ static int stm32_ltdc_bind(struct udevice *dev)
>  	uc_plat->size = CONFIG_VIDEO_STM32_MAX_XRES *
>  			CONFIG_VIDEO_STM32_MAX_YRES *
>  			(CONFIG_VIDEO_STM32_MAX_BPP >> 3);
> -	debug("%s: frame buffer max size %d bytes\n", __func__, uc_plat->size);
> +	dev_dbg(dev, "frame buffer max size %d bytes\n", uc_plat->size);
>  
>  	return 0;
>  }

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks


More information about the U-Boot mailing list