[PATCH 4/4] arm: octeontx: Add CMD_WDT

Stefan Roese sr at denx.de
Fri Oct 16 15:39:57 CEST 2020


On 23.09.20 11:01, Stefan Roese wrote:
> Enable WDT command for Octeon TX/TX2 boards.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Aaron Williams <awilliams at marvell.com>
> Cc: Suneel Garapati <sgarapati at marvell.com>
> Cc: Chandrakala Chavva <cchavva at marvell.com>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
>   configs/octeontx2_95xx_defconfig | 1 +
>   configs/octeontx2_96xx_defconfig | 1 +
>   configs/octeontx_81xx_defconfig  | 1 +
>   configs/octeontx_83xx_defconfig  | 1 +
>   4 files changed, 4 insertions(+)
> 
> diff --git a/configs/octeontx2_95xx_defconfig b/configs/octeontx2_95xx_defconfig
> index 047cb45a21..a17e5521d9 100644
> --- a/configs/octeontx2_95xx_defconfig
> +++ b/configs/octeontx2_95xx_defconfig
> @@ -41,6 +41,7 @@ CONFIG_CMD_BKOPS_ENABLE=y
>   CONFIG_CMD_PART=y
>   CONFIG_CMD_PCI=y
>   CONFIG_CMD_SF_TEST=y
> +CONFIG_CMD_WDT=y
>   CONFIG_CMD_DHCP=y
>   CONFIG_CMD_TFTPPUT=y
>   CONFIG_CMD_TFTPSRV=y
> diff --git a/configs/octeontx2_96xx_defconfig b/configs/octeontx2_96xx_defconfig
> index 7b5a1243a7..2e6cef0684 100644
> --- a/configs/octeontx2_96xx_defconfig
> +++ b/configs/octeontx2_96xx_defconfig
> @@ -42,6 +42,7 @@ CONFIG_CMD_PART=y
>   CONFIG_CMD_PCI=y
>   CONFIG_CMD_SF_TEST=y
>   CONFIG_CMD_USB=y
> +CONFIG_CMD_WDT=y
>   CONFIG_CMD_DHCP=y
>   CONFIG_CMD_TFTPPUT=y
>   CONFIG_CMD_TFTPSRV=y
> diff --git a/configs/octeontx_81xx_defconfig b/configs/octeontx_81xx_defconfig
> index ca3286b901..ff24e6e1e8 100644
> --- a/configs/octeontx_81xx_defconfig
> +++ b/configs/octeontx_81xx_defconfig
> @@ -43,6 +43,7 @@ CONFIG_CMD_PART=y
>   CONFIG_CMD_PCI=y
>   CONFIG_CMD_SF_TEST=y
>   CONFIG_CMD_USB=y
> +CONFIG_CMD_WDT=y
>   CONFIG_CMD_DHCP=y
>   CONFIG_CMD_TFTPPUT=y
>   CONFIG_CMD_TFTPSRV=y
> diff --git a/configs/octeontx_83xx_defconfig b/configs/octeontx_83xx_defconfig
> index e7dd3f6b73..ab38d007ea 100644
> --- a/configs/octeontx_83xx_defconfig
> +++ b/configs/octeontx_83xx_defconfig
> @@ -41,6 +41,7 @@ CONFIG_CMD_PART=y
>   CONFIG_CMD_PCI=y
>   CONFIG_CMD_SF_TEST=y
>   CONFIG_CMD_USB=y
> +CONFIG_CMD_WDT=y
>   CONFIG_CMD_DHCP=y
>   CONFIG_CMD_TFTPPUT=y
>   CONFIG_CMD_TFTPSRV=y
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list