[PATCH 4/4] serial: serial_xen: add DEBUG_UART support

Anastasiia Lukianenko Anastasiia_Lukianenko at epam.com
Fri Oct 23 10:53:52 CEST 2020


Hi,

On Thu, 2020-10-22 at 18:53 +0900, takahiro.akashi at linaro.org wrote:
> On Thu, Oct 22, 2020 at 09:19:41AM +0000, Anastasiia Lukianenko
> wrote:
> > Hi,
> > 
> > On Thu, 2020-10-15 at 13:25 +0900, AKASHI Takahiro wrote:
> > > By using a hypervisor call, we can implement DEBUG_UART on xen.
> > > This will allow us to see messages even earlier than
> > > serial_init().
> > > 
> > > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > > ---
> > >  drivers/serial/Kconfig      | 14 +++++++++++---
> > >  drivers/serial/serial_xen.c | 20 ++++++++++++++++++++
> > >  2 files changed, 31 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > > index e344677f91f6..536cf0641773 100644
> > > --- a/drivers/serial/Kconfig
> > > +++ b/drivers/serial/Kconfig
> > > @@ -401,11 +401,19 @@ config DEBUG_UART_MTK
> > >  	  driver will be available until the real driver model serial
> > > is
> > >  	  running.
> > >  
> > > +config DEBUG_UART_XEN
> > > +	bool "XEN Hypervisor Console"
> > > +	depends on XEN_SERIAL
> > > +	help
> > > +	  Select this to enable a debug UART using the serial_xen
> > > driver. You
> > > +	  will not have to provide any parameters to make this work.
> > > The driver
> > > +          will be available until the real driver-model serial
> > > is
> > > running.
> > > +
> > >  endchoice
> > >  
> > >  config DEBUG_UART_BASE
> > >  	hex "Base address of UART"
> > > -	depends on DEBUG_UART
> > > +	depends on DEBUG_UART && !DEBUG_UART_XEN
> > >  	default 0 if DEBUG_UART_SANDBOX
> > >  	help
> > >  	  This is the base address of your UART for memory-mapped
> > > UARTs.
> > > @@ -415,7 +423,7 @@ config DEBUG_UART_BASE
> > >  
> > >  config DEBUG_UART_CLOCK
> > >  	int "UART input clock"
> > > -	depends on DEBUG_UART
> > > +	depends on DEBUG_UART && !DEBUG_UART_XEN
> > >  	default 0 if DEBUG_UART_SANDBOX
> > >  	help
> > >  	  The UART input clock determines the speed of the internal
> > > UART
> > > @@ -427,7 +435,7 @@ config DEBUG_UART_CLOCK
> > >  
> > >  config DEBUG_UART_SHIFT
> > >  	int "UART register shift"
> > > -	depends on DEBUG_UART
> > > +	depends on DEBUG_UART && !DEBUG_UART_XEN
> > >  	default 0 if DEBUG_UART
> > >  	help
> > >  	  Some UARTs (notably ns16550) support different register
> > > layouts
> > > diff --git a/drivers/serial/serial_xen.c
> > > b/drivers/serial/serial_xen.c
> > > index ed191829f059..34c90ece40fc 100644
> > > --- a/drivers/serial/serial_xen.c
> > > +++ b/drivers/serial/serial_xen.c
> > > @@ -5,6 +5,7 @@
> > >   */
> > >  #include <common.h>
> > >  #include <cpu_func.h>
> > > +#include <debug_uart.h>
> > >  #include <dm.h>
> > >  #include <serial.h>
> > >  #include <watchdog.h>
> > > @@ -15,11 +16,14 @@
> > >  #include <xen/events.h>
> > >  
> > >  #include <xen/interface/sched.h>
> > > +#include <xen/interface/xen.h>
> > >  #include <xen/interface/hvm/hvm_op.h>
> > >  #include <xen/interface/hvm/params.h>
> > >  #include <xen/interface/io/console.h>
> > >  #include <xen/interface/io/ring.h>
> > >  
> > > +#include <asm/xen/hypercall.h>
> > > +
> > >  DECLARE_GLOBAL_DATA_PTR;
> > >  
> > >  u32 console_evtchn;
> > > @@ -178,3 +182,19 @@ U_BOOT_DRIVER(serial_xen) = {
> > >  	.flags			= DM_FLAG_PRE_RELOC,
> > >  };
> > >  
> > > +#if defined(CONFIG_DEBUG_UART_XEN)
> > > +static inline void _debug_uart_init(void) {}
> > > +
> > > +static inline void _debug_uart_putc(int c)
> > > +{
> > > +#if CONFIG_IS_ENABLED(ARM)
> > > +	xen_debug_putc(c);
> > > +#else
> > > +	/* the type cast should work on LE only */
> > > +	HYPERVISOR_console_io(CONSOLEIO_write, 1, (char *)&ch);
> > 
> > An error occurs during compilation:
> > drivers/serial/serial_xen.c: error: ‘ch’ undeclared (first use in
> > this
> > function); did you mean ‘c’?
> >         HYPERVISOR_console_io(CONSOLEIO_write, 1, (char *)&ch);
> 
> Ah, yes. You're now using x86, right?
> 
> So what happens if you have made the fix above?
> Does it work in your environment?
> (I have confirmed that HYPERVISOR_console_io version works on
> arm(64).)
> 

Sorry, I forgot to write in the last letter the question:
Why can't we simply use HYPERVISOR_console_io(CONSOLEIO_write, 1, (char
*)&ch); for both ARM and Xen?

Regards,
Anastasiia

> Thanks,
> -Takahiro Akashi
> 
> 
> > > +#endif
> > > +}
> > > +
> > > +DEBUG_UART_FUNCS
> > > +
> > > +#endif
> > 
> > Regards,
> > Anastasiia


More information about the U-Boot mailing list