[PATCH 01/18] mips: dts: switch to board defines for dtb for mtmips

[Stefan Roese]

On 16.10.20 09:35, Weijie Gao wrote:
> Previous the dts files for gardena-smart-gateway-mt7688 and
> linkit-smart-7688 are set to be built when mtmips is selected.
> 
> This can lead to a compilation error if another soc is added to this arch
> with different dtsi files.
> 
> So it's better to build the dtb only if their board is selected.
> 
> Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   arch/mips/dts/Makefile | 5 ++---
>   1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
> index dc85901dca..e82f96d4e4 100644
> --- a/arch/mips/dts/Makefile
> +++ b/arch/mips/dts/Makefile
> @@ -1,8 +1,5 @@
>   # SPDX-License-Identifier: GPL-2.0+
>   
> -dtb-$(CONFIG_ARCH_MTMIPS) += \
> -	gardena-smart-gateway-mt7688.dtb \
> -	linkit-smart-7688.dtb
>   dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
>   dtb-$(CONFIG_TARGET_AP143) += ap143.dtb
>   dtb-$(CONFIG_TARGET_AP152) += ap152.dtb
> @@ -18,6 +15,8 @@ dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
>   dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
>   dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
>   dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb
> +dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb
> +dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb
>   dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb
>   dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
>   dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de