[PATCH 4/7] ARM: dts: sam9x60: use u-boot,dm-pre-reloc

[Eugen.Hristev at microchip.com]

On 06.10.2020 09:57, Claudiu Beznea - M18063 wrote:
> Hi Eugen,
> 
> On 06.10.2020 09:39, Eugen Hristev - M18282 wrote:
>> On 05.10.2020 17:58, Claudiu Beznea wrote:
>>> Use u-boot,dm-pre-reloc for slow xtal and main xtal.
>>>
>>> Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
>>> ---
>>
>> Hi Claudiu,
>>
>> For this patch and the following DT patches:
>>
>> the u-boot,dm-pre-reloc property must be added to the file
>> sam9x60ek-u-boot.dtsi (or sam9x60-u-boot.dtsi if needed to be created )
> 
> For clocks section in device tree (which contains these fixed clocks) there
> is no entry in sam9x60ek-u-boot.dtsi. Would you like me to add
> u-boot,dm-pre-reloc only per section or for each clock in the clocks section?

If your patch adds u-boot,dm-pre-reloc in a section, then add this 
section to the sam9x60ek-u-boot.dtsi file (you can add just a pointer to 
the section like &section { u-boot-dm,pre-reloc; }; )
If your patch adds the property to a clock, then you can just add a 
pointer to that clock in the sam9x60ek-u-boot.dtsi file

> 
> Thank you,
> Claudiu Beznea
> 
>>
>> Eugen
>>
>>>    arch/arm/dts/sam9x60.dtsi | 2 ++
>>>    1 file changed, 2 insertions(+)
>>>
>>> diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi
>>> index 51de586e1900..a4e2576d8e0f 100644
>>> --- a/arch/arm/dts/sam9x60.dtsi
>>> +++ b/arch/arm/dts/sam9x60.dtsi
>>> @@ -30,11 +30,13 @@
>>>    		slow_xtal: slow_xtal {
>>>    			compatible = "fixed-clock";
>>>    			#clock-cells = <0>;
>>> +			u-boot,dm-pre-reloc;
>>>    		};
>>>    
>>>    		main_xtal: main_xtal {
>>>    			compatible = "fixed-clock";
>>>    			#clock-cells = <0>;
>>> +			u-boot,dm-pre-reloc;
>>>    		};
>>>    	};
>>>    
>>>