[PATCH 4/7] ARM: dts: sam9x60: use u-boot,dm-pre-reloc

[Claudiu.Beznea at microchip.com]

Hi Eugen,

On 06.10.2020 09:39, Eugen Hristev - M18282 wrote:
> On 05.10.2020 17:58, Claudiu Beznea wrote:
>> Use u-boot,dm-pre-reloc for slow xtal and main xtal.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
>> ---
> 
> Hi Claudiu,
> 
> For this patch and the following DT patches:
> 
> the u-boot,dm-pre-reloc property must be added to the file 
> sam9x60ek-u-boot.dtsi (or sam9x60-u-boot.dtsi if needed to be created )

For clocks section in device tree (which contains these fixed clocks) there
is no entry in sam9x60ek-u-boot.dtsi. Would you like me to add
u-boot,dm-pre-reloc only per section or for each clock in the clocks section?

Thank you,
Claudiu Beznea

> 
> Eugen
> 
>>   arch/arm/dts/sam9x60.dtsi | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi
>> index 51de586e1900..a4e2576d8e0f 100644
>> --- a/arch/arm/dts/sam9x60.dtsi
>> +++ b/arch/arm/dts/sam9x60.dtsi
>> @@ -30,11 +30,13 @@
>>   		slow_xtal: slow_xtal {
>>   			compatible = "fixed-clock";
>>   			#clock-cells = <0>;
>> +			u-boot,dm-pre-reloc;
>>   		};
>>   
>>   		main_xtal: main_xtal {
>>   			compatible = "fixed-clock";
>>   			#clock-cells = <0>;
>> +			u-boot,dm-pre-reloc;
>>   		};
>>   	};
>>   
>>
>